the Outdoor GreatRoom Company HBV-1242 Harbor View Rectangular Gas Fire Pit Table User Guide

June 15, 2024
THE OUTDOOR GREATROOM COMPANY

the Outdoor GreatRoom Company HBV-1242 Harbor View Rectangular Gas Fire

Pit Table

Product Information

Specifications:

  • Model: HBV-1242
  • Required Tools: None mentioned
  • Optional Accessories: Glass Burner Cover (1242GGC), Wind Guard (GG-1242, FWG-1242)
  • Service Parts: Touch-Up Kit (HBV-TU), Dent Repair Kit (HBV-DR)
  • Maintenance: Annual resealing of concrete recommended
  • Warranty: 1-year manufacturer’s warranty

Product Usage Instructions

Unboxing and Setup:

  1. Cut strap(s) and tape to unfold flaps on the box.
  2. Slide the box upwards and remove all packing materials.
  3. Lift the unit off the pallet, making sure to lift it over the media box attached to the pallet.

Assembly:

  1. Install an AAA battery (not included) in the sparker.
  2. Remove tie(s) for the gas line and set it into place.
  3. With the propane tank in the OFF position, connect the regulator hose to the tank. Hand-tighten the connection; do not use tools for this connection.
  4. Do not burn without glass or other approved decorative fire media.

Maintenance:

It is recommended to reseal the concrete annually with a clear concrete sealer, which can be purchased at your local hardware store.

Warranty Registration:

To register your product and avail of the 1-year manufacturer’s warranty, please visit
https://www.outdoorrooms.com/product-registration.

FAQ

  • Q: Are tools required for assembly?
    • A: No, tools are not required for the assembly process as per the provided instructions.
  • Q: What annual maintenance is recommended for this product?
    • A: It is recommended to reseal the concrete annually with a clear concrete sealer, available at local hardware stores.

Required Tools

Unboxing your Fire Table

  1. Cut strap(s) & tape Unfold flaps on box
  2. Slide box upwards. Remove all packing materials
  3. Lift unit up off pallet. Lift over media box attached to pallet
  4. Refer to the Crystal Fire® Plus manual for clearance to combustibles.
    • a. Remove film on metal around burner.
    • b. Scatter media on burner surface forming an even layer.
    • c. Release hose & regulator from shipping clips.
  5. Install AAA battery (Not included) in sparker
  6. Remove tie(s) for gas line and set into place. With your propane tank in OFF position, connect the regulator hose to your propane tank. Hand-tighten connection, do not use tools for this connection

DO NOT BURN WITHOUT GLASS OR OTHER APPROVED DECORATIVE FIRE MEDIA

Optional Accessories

Fire Media

Service Parts

  • Refer to Crystal Fire® Plus instruction manual for burner service parts.

Touch-Up

  • Shake up bottle of stain.
  • Using the included brush inside the bottle, spread stain evenly across the scratch.
  • Wipe up any excess with a paper towel. Let dry.

Dent Repair

  • Take bottle of powder, and dump into a disposable cup.
  • Add 2 teaspoons of water, stir.
  • Spread onto dent with trowel/putty knife. Let dry.
  • Lightly sand excess off to create smooth surface.
  • Wipe with a wet paper towel to remove dust. Let dry.
  • Use Touch-Up paint, with larger brush to feather edges.
  • Let dry.

Maintenance

Annual maintenance: Recommended to reseal concrete annually with clear concrete sealer, available at your local hardware store.

WARNING: This product can expose you to chemicals including Carbon Monoxide and Benzene which are known to the State of California to cause cancer or birth defects or reproductive harm. For more information, visit www.P65Warnings.ca.gov

Warranty: Fire pit tables are covered under a 1-year manufacturer’s warranty.

Please visit https://www.outdoorrooms.com/product-registration to register your product.

Contact

9583 217th St. W.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

THE OUTDOOR GREATROOM COMPANY User Manuals

Related Manuals