MeTra 99-8905B Subaru Fits Select Vehicles Dash Kit Instruction Manual
- June 15, 2024
- Metra
Table of Contents
MeTra 99-8905B Subaru Fits Select Vehicles Dash Kit
Product Information
Specifications:
- Product Name: Part 99-8905B
- Compatibility: Subaru 2012-2015 models
- Features: ISO DIN radio provision with pocket
Product Usage Instructions
Installation Instructions:
- Disconnect the air selector cable located on the driver’s side of the center console, behind the dash, and above the gas pedal.
- Open the glove box and squeeze in on the sides to remove it.
- Disconnect the temperature selector cable located on the passenger side of the center console, behind the glove box.
- Unclip and remove the trim panel surrounding the factory radio including the a/c vents and climate controls.
- Remove (4) Phillip screws from the factory radio and remove them. Continue to kit assembly.
Kit Assembly:
- Remove the metal DIN sleeve and trim ring from the aftermarket radio.
- Attach the Radio Brackets to the Radio Trim Panel.
- Secure the pocket to the completed assembly using (4) #8 x 3/8 Phillips screws provided.
- Slide the radio in from the back of the kit, and then secure the radio to the completed assembly using screws supplied with the radio.
- Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter from Metra or AXXESS. Re-connect the negative battery terminal and test the radio for proper operation.
- Reassemble the dash in reverse order of disassembly.
FAQ:
-
Q: What should I do if I encounter difficulties during installation?
A: If you face installation challenges, please call our Tech Support line at 1-800-253-TECH. Before contacting us, review the instructions thoroughly and ensure that the installation was carried out precisely as described. Have your vehicle ready for troubleshooting steps before reaching out for assistance. -
Q: How can I enhance my installation skills?
A: Improve your installation and fabrication abilities by enrolling in our industry’s most recognized mobile electronics school. Visit www.installerinstitute.com or call 800-354-6782 for more details and to advance towards a better future.
KIT FEATURES
- ISO DIN radio provision with pocket
- Painted Matte Black
KIT COMPONENTS
- A) Radio trim panel
- B) Radio brackets
- C) Pocket
- D) (4) #8 x 3/8” Phillips screws
APPLICATIONS
SUBARU
- Forester (without NAV) 2014-2015
- Impreza (without NAV) 2012-2014
- WRX (without NAV) 2015
- XV Crosstrek (without NAV) 2013-2014
TOOLS REQUIRED
- Panel removal tool
- Phillips screwdriver
WIRING & ANTENNA CONNECTIONS (sold separately)
- Wiring Harness: 70-7552
- Antenna Adapter: Not required
CAUTION!
Metra recommends disconnecting the negative bat-tery terminal before beginning
any installation unless the vehicle manufacturer recommends against so. Please
check with your local Dealership for more information. All accessories,
switches, climate controls panels, and especially air bag indicator lights
must be connected before reconnecting the battery or cycling the ignition.
Also, do not remove the factory radio with the key in the on position, or the
vehicle running. It would be best to remove the key from the ignition and then
wait a few seconds before removing the factory radio.
Dash Disassembly
- Disconnect the air selector cable located on the driver’s side of the center console, behind the dash, and above the gas pedal. (Figures A & B)
- Open the glove box and squeeze in on the sides to remove it.
- Disconnect the temperature selector cable located on the passenger side of the center console, behind the glove box. (Figure C)
- Unclip and remove the trim panel surrounding the factory radio including the a/c vents and climate controls. (Figure D)
- Remove (4) Phillip screws from the factory radio and remove. (Figure E) Continue to kit assembly
Kit Assembly
ISO DIN radio provision with pocket
- Remove the metal DIN sleeve and trim ring from the aftermarket radio.
- Attach the Radio Brackets to the Radio Trim Panel. (Figure A)
- Secure the pocket to the completed assembly using (4) #8 x 3/8” Phillips screws provided. (Figure B)
- Slide the radio in from the back of the kit, and then secure the radio to the completed assembly using screws supplied with the radio. (Figure C)
- Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter from Metra or AXXESS. Re-connect the negative battery terminal and test the radio for proper operation.
- Reassemble the dash in reverse order of disassembly.
IMPORTANT INFORMATION
If you are having difficulties with the installation of this product, please call our Tech Support line at 1-800-253-TECH. Before doing so, look over the instructions a second time, and make sure the installation was performed exactly as the instructions are stated. Please have the vehicle apart and ready to perform troubleshooting steps before calling.
KNOWLEDGE IS POWER
- Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry.
- Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow.
Metra recommends MECP-certified technicians
© COPYRIGHT 2004-2015 METRA ELECTRONICS CORPORATION. metraonline.com.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>