IO by HFCL HSP-IO-24S4XS-C2AH 24 Port SFP L2 Managed Switch User Guide
- June 14, 2024
- IO by HFCL
Table of Contents
IO by HFCL HSP-IO-24S4XS-C2AH 24 Port SFP L2 Managed Switch
Product Information
Specifications
- Capacity: Switching: 128 Gbps, Forwarding: 95.232 mpps
- Port Configuration: 24×10/100/1000 SFP ports
- Uplink Ports: 4×1/10G SFP+ Uplink Ports
- L2 Features: Support 4094 VLAN IDs, 16K MAC Table
- Security: L2, L3, L4 ACLs, 802.1X Authentication (RADIUS, TACACAS+)
- Storm Control: Broadcast, Multicast and Unknown Unicast
- Management: CLI, Telnet, SSHv2, SNMP v1/v2/v3 and ZTP
- Temperature: Operating: 0 to 55°C
- Power Input: 100V to 240V for AC
Product Usage Instructions
Packaging Content
The package includes:
- 1 x 24 Port SFP Switch
- Mounting clamps with screws
- Power supply cord
Bracket Assembly
- Secure the brackets to the device using the supplied screws from the Mounting Accessory.
- Install the device in the rack using four rack-mounting screws. Secure the lower rack-mounting screws first to prevent bending.
- If installing multiple switches, mount them one below the other in any order.
- Turn on the power supply securely.
Login Access
To access the switch via console port, use an RJ45 to DB9 serial port adapter
with the following settings: Speed: 115200 bps | Data Bits: 8 Stop Bit: 1 |
Parity: None Flow Control: Hardware
Frequently Asked Questions (FAQ)
-
Q: How do I access the switch for configuration?
A: You can access the switch via the console port using an RJ45 to DB9 serial port adapter with specific settings mentioned in the manual. -
Q: What are the safety precautions to be followed?
A: Do not power the device during installation, keep away from high voltage cables, do not power off during upgrades, and do not open the enclosure.
Introduction
Thank you for choosing 24-port SFP L2 Managed Switch from HFCL Switching Platform. All SFP Port Variants Suitable as access or aggregation switch in Enterprise/Campus/Telco Environment.
Packaging Content
- 24 Port SFP Switch Qty: 1 number
- Mounting clamps with screws
- Power supply cord
Bracket Assembly
Assembly of brackets for rack mounting described in below diagram for 24 Port L2 SFP switch model.
- Step 1. Secure the brackets to the device using the supplied screws from the Mounting Accessory.
- Step 2. Install the device in the rack using four rack-mounting screws. Ensure that you secure the lower rack-mounting screws first to prevent the brackets from bending due to the switch’s weight.
- Step 3. If installing multiple switches, mount them in the rack, one below the other, in any order.
- Step 4. Turn on the power supply in switch securely.
Login access
The console access to the Switch can be obtained via the console port using RJ45 to DB9 serial port adapter. An administrator can access device using Command Line Interface (CLI) with following console port setting as part of factory default configuration.
- Speed: 115200 bps | Data Bits: 8
- Stop Bit: 1 | Parity: None
- Flow Control: Hardware
Product Specification
HSP-IO-24S4XS-C2AH Specifications
Capacity| Switching: 128 Gbps,
Forwarding: 95.232 mpps
---|---
Port Configuration| 24×10/100/1000 SFP ports
Uplink Ports| 4×1/10G SFP+ Uplink Ports
L2 Features| Support 4094 VLAN IDs, 16K MAC Table
Security| L2, L3, L4 ACLs, 802.1X Authentication (RADIUS, TACACAS+)
Storm Control| Broadcast, Multicast and Unknown Unicast
Management| CLI, Telnet, SSHv2, SNMP v1/v2/v3 and ZTP
Temperature| Operating: 0 to 550 C
Power Input| 100V to 240V for AC
Port LED status
LED Label | LED Colour | Indication | Status |
---|---|---|---|
LINK | Green/Yellow | Solid Green | Link Up at 1000Mbps speed |
Solid Yellow | Link Up at 100Mbps speed | ||
OFF | No Link |
System LED status
LED Label | LED Colour | Indication | Status |
---|---|---|---|
SM | Blue | OFF | System is powered OFF |
Blinking | Power up sequence in process | ||
Solid ON | System is booted and operational | ||
ALM | Red | OFF | No alarms reported |
Blinking | Alarm reported | ||
Solid ON | Critical alarm reported |
Safety Precautions
Observe the following safety precautions to avoid damage to the Switch:
- Do not power the device during installation.
- Keep away from high voltage cables.
- Do not power off the unit in the middle of an upgrade process.
- Do not open the enclosure.
iosupport@hfcl.com
hfcl.com
io.hfcl.com
8, Commercial Complex, Masjid Moth, Greater Kailash-II, New Delhi- 110048
HFCL Limited All Rights Reserved. HFCL and io by HFCL are trademarks or registered trademarks of HFCL Ltd. Specifications are subject to change without notice.
References
- HFCL | Leading Digital Network Solutions | Manufacturers of Optical Fiber Cables
- IO by HFCL: Transforming Telecom and Technology Solutions
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>