JBL Boombox 3 User Guide
- June 3, 2024
- JBL
Table of Contents
JBL Boombox 3
WHATS IN THE BOX
BLUETOOTH PAIRING
PLAY
PARTYBOOST
APP
CHARGING
POWERBANK
WATERPROOF DUSTPROOF
TECHNICAL INFORMATION
- Transducers: 189 x 114 mm Subwoofer, 2 x 80.9 x 80.9 mm Midrange/ 2 x 2.75 inch, 2 x Φ20 mm Tweeter/ 2 x 0.75 inch
- Output power: 1 x 80 W RMS-subwoofer + 2 x 40 W RMS-midrange + 2 x 10 W RMS-tweeter (AC mode) 1 x 60 W RMS-subwoofer + 2 x 30 W RMS-midrange + 2 x 8
- W RMS-tweeter (Battery mode)
- Power input: 100 – 240 Vac ; 50/60 Hz ;
- Frequency response: 40 Hz – 20 kHz
- Signal-to-noise ratio: > 80 dB
- Battery type: Li-ion polymer 69.696 Wh (equivalent to 7.26 V / 9,600 mAh)
- Battery charge time: 6.5 hours
- Music play time: up to 24 hours (dependent on volume level and audio content)
- Connection ports: AC-in, USB-A, Aux-in
- Cable type: AC Power Cable
- Cable length: 2000 mm / 78.7”
- USB charge out: 5 V / 2 A (maximum)
- Bluetooth® version: 5.3
- Bluetooth® profile: A2DP 1.3, AVRCP 1.6
- Bluetooth® transmitter
- frequency range: 2.4 GHz – 2.4835 GHz
- Bluetooth® transmitter
- power: ≤ 9 dBm (EIRP)
- Bluetooth® transmitter
- modulation: GFSK, π/4 DQPSK, 8DPSK
- Product dimensions (W x H x D): 482.4 x 256.9 x 199.7 mm / 19.0 x 10.1 x 7.9 “ Net weight: 6.7 kg / 14.7 lbs
- Packaging dimensions (W x H x D): 565 x 324 x 256.5 mm / 22.2 x 12.8 x 10.1 “
- Gross weight: 9.74 kg / 21.47 lbs
- Maximum operation
2.4GHz SRD frequency range: 2.407 GHz – 2.475 GHz 2.4GHz SRD transmitter power: ≤ 15 dBm (EIRP) 2.4GHz SRD transmitter modulation:
The product must be placed horizontally under working normally To protect battery lifespan, fully charge at least once every 3 months. Battery life will vary due to usage patterns and environmental conditions. Do not expose the JBL Boombox 3 to liquids without removing cable connection. Do not expose JBL Boombox 3 to water while charging. It may result in permanent damage to the speaker or power source. Chemicals, salt or “foreign particles” in your pool or the ocean can damage the waterproof seals or harm the connector surface over time if not rinsed off after use. After a liquid spill or rinse, do not charge your speaker until it’s completely dry and clean. Charging when wet might damage your speaker. FR Pour protéger la vie de la batterie, chargez-la complètement au moins une
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>