prolink Dual Band 4MP Home Security Camera User Guide
- June 12, 2024
- PROLiNK
Table of Contents
prolink Dual Band 4MP Home Security Camera
A step-by-step guide for NVR configuration with Prolink home security camera
Before You Start
- This guide only works for Prolink home security camera models, DS-3106, DS-3107 and DS-3103.
- This guide uses Hikvision NVR for illustration. Users can configure the home security camera with any other NVR program.
- Ensure the home security camera and the NVR are connected to the same network via the same router.
- Enable ONVIF Switch in the mEzee app and create the password*. Please take note to remember the IP address and password.
Note: Use letters and numbers only. Please do not include any special characters (such as !@+).
Additional Information
- DS-3106 – Support H.264 Video Codec only
- DS-3107 – Support H 2.65 Video Codec only
- DS-3103 – Support H.265 Video Codec only
Step 1. Select Camera in the NVR program. Step 2. Select any channel and click Edit.
Step 3. Input the following information:
- Adding Method: Manual
- IP Address: Follow the IP Address shown in the mEzee app
- Protocol: ONVIF
- Password: Enter the password created in the mEzee app
Step 4. The green status icon at the side indicates successful configuration.
Step 5: Configuration is completed when the live feed of the home security camera is seen.
Version 1.0 | May 2024
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>