prolink PIC3003WP Full-HD Wireless IP Camera (PanTilt) Installation Guide
- June 5, 2024
- PROLiNK
Table of Contents
prolink PIC3003WP Full-HD Wireless IP Camera (PanTilt)
Package Contents
Note:
- The illustrations in this document may appear different from your model
- If any of above item is not packed in your package when opening, please consult your reseller immediately.
Overview
Interface
- Light Sensor
- Camera Lens
- Infrared LED
- microSD Card Slot
- Microphone
- Speaker
- Reset Button
- Power Input (5V 1A)
- Mounting Hole
Note: The illustrations in this document may appear different from your actual product.
Getting Started
Step 1. Place the IP camera and phone at about 1 ~ 3 feet distance of the
router.
Note:
- Make sure the phone is connected to the router wirelessly.
- Camera is operating only at 2.4GHz Wi-Fi standard.
Step 2. Download, install, and create an account through Prolink mEzee
App. Scan below QR code to download from Google Store or Apple App Store.
Alternatively, search for “mEzee”.
Camera Setup
-
Adding camera device to mobile app
Step 1. Power on the camera with the provided 5V 1A DC Power Adapter.
Step 2. Login to your account on the mEzee App.
Step 3. Click “Add Device” or “+” on the top right corner of the screen to add camera.
Step 4. Follow the in-app instructions until the camera is connected to the
Wi-Fi Network successfully. Upon successful connection, you will see an “Added Successfully” screen. -
Positioning camera device
- The camera could be placed on a shelf or any flat surface, alternatively it can be mounted on the ceiling/wall.
- To mount the camera on the ceiling/wall:
- Fasten the mounting bracket with screw provided on the ceiling
- Slot the camera according to the mounting hole
Note:
- For physical placement, please do consider the router’s wireless coverage. As a generic guideline, use another 2.4GHz Wi-Fi Client at the intended location to test the Wi-Fi coverage and stability prior installing the camera.
- Please ensure that the mobile phone is connected to the Wi-Fi’s 2.4GHz network during the setup.
5 microSD Card Storage (Optional)
Insert a microSD Card into the slot to enable recording function.
How to insert microSD Card
Step 1. Manually tilt the PIC3003WP’s camera lens upwards until the
maximum tilt angle.
Step 2. Ensure that the microSD Card contact pin is facing up.
Step 3. Insert the microSD Card into the microSD Card slot. The microSD Card will be secured once you feel the “click”. To release, gently push the microSD Card again for it to bounce back out.
Step 4. You may select your preferred recording mode as follows: (a) Event Recording (default) (b) Non-Stop
Worldwide Customer Care Centers
INDONESIA Office
PT PROLiNK INTIDATA NUSANTARA
Walk-In: Jl. Cideng Barat No. 79, Jakarta Pusat 10150, Indonesia.
Telephone: +62 21 3483 1777
Sale Enquiries : [email protected]
Technical Support :
[email protected]
MALAYSIA Office
FIDA SYSTEMS (M) SDN BHD
Walk-In: 29 Jalan USJ 1/31, 47600 Subang Jaya, Selangor Darul Ehsan, Malaysia.
Telephone: +60 3 8024 9151
Sale Enquiries : [email protected]
Technical Support :
[email protected]
SINGAPORE Office
FIDA INTERNATIONAL (S) PTE LTD
Walk-In: Block 16 Kallang Place #06-02, Kallang Basin Industrial Estate,
Singapore 339156.
Telephone: +65 6357 0668
Sale Enquiries : [email protected]
Technical Support : [email protected]
Technical Support Hotline
INDONESIA: +62 21 3483 1717
MALAYSIA: +60 3 8023 9151
SINGAPORE: +65 6357 0666
Note: Closed on Saturdays, Sundays and local/regional Public Holidays.
Register online for your Product Warranty
atwww.prolink2u.com
Prolink is a registered trademark of Fida International (S) Pte Ltd. Other
brands and product names are trademarks or registered trademarks of their
respective holders. Product images are purely for illustrative purposes and
may defer from the actual product. Specifications are subjected to changes
without prior notice. Copyright © 2022 Fida International (S) Pte Ltd.