prolink GT-22003 2 Port USB Wall Charger 20W Gan PD User Guide
- June 1, 2024
- PROLiNK
Table of Contents
prolink GT-22003 2 Port USB Wall Charger 20W Gan PD
Package Contents
Overview
- USB Type-C Port supports Power Delivery PPS a Quick Charge Technology.
- USB Type-A Port supports Quick Charge Technology.
Specification
- Input: AC 100-240V 50/60Hz 0.8A
- Total Output: 20W (max)
- Output Distribution:
- Connecting 1 Device
- Connecting 2 Devices
Using the Device
- Plug the cable needed into the respective port.
- Charge your tablets or phones.
- Use PD PPS for optimal charging.
Notes:
- The IntelliSense technology automatically identifies the charging current of your device and charges it at full speed.
- USB Power Delivery (PO) is a foster charging technology that allows compatible devices to charge quickly over a USB-C connection (requires USB-C to Lightning Cable for iPhone 14 Pro Max/14Pro/ 14 Plus/14/13 Pro Max/13 Pro/13/12 Pro Max/12 Pro/12/12 Mini/11 Pro Max /11 Pro/11/SE/XR/XS Max/XS/X/8 Plus/8).
- Quick Charge 3.0 can charge compatible devices up to 4X faster than the conventional 5W charger. Please note that iOS does not support the quick charge function, this charger will act as a conventional charger, which can provide max 1A current for Apple Devices.
- This AC Adapter is for information technology equipment use only.
- This AC Adapter is for indoor use only.
Attention (Read before use)
- Use original or certified cables.
- Do not expose to liquids.
- Do not disassemble.
- Avoid dropping.
- Avoid extreme temperatures higher than 35°C (95° F).
Note:
Misuse, mishandling or other operation of the product that fails to comply
with this manual may result in damage to the connected device(s) or to the USB
Charger. In the event of damage resulting from such actions, Prolink is not
liable for compensation or maintenance responsibility.
Frequently Asked Questions
-
Q: What should I do if charging is slow on PD PPS when A port is in usage?
A: Power OFF and ON the charger to allow it to restart to redistribute the power output. -
Q: Why does the charging process keep restarting?
A: When multiple ports are used at the same time, the power will be cut off for 2-3 times due to circuit protection. The charger will automatically restart to match the respective fast charging protocols and redistribute power output.
Worldwide Customer Care Centers
INDONESIA Office
PT PROLINK INTIDATA NUSANTARA
- Wolk-In: JI. Cideng Borat No. 79, Jakarta Pusot 10150, Indonesia.
- Telephone: +62 21 34831777
- Email Support: support.id@prolink2u.com
MALAYSIA Office
FIDA SYSTEMS (M) SDN BHD
- Wolk-In: 2 9 Jolon USJ 1/31, 47600 Subong Jaya, Selangor Darul Ehsan, Malaysia.
- Telephone: +60 3 802 4 9151
- Email Support: support.my@pro1ink2u.com
SINGAPORE Office
FIDA INTERNATIONAL (S) PTE LTD
- Wolk-In: Block 16 Kallang Place #06-02, Kallang Basin Industrial Estate, Singapore 339156.
- Telephone: +65 6357 0668
- Email Support: support@prolink2u.com
Technical Support Hotline
- INDONESIA: +62 21 34831717
- MALAYSIA: +60 3 802 3 9151
- SINGAPORE: +65 6357 0666
Note: Closed on Saturdays, Sundays and local/regional Public Holidays.
Prolink is a registered trademark of Fida International (S) Pte Ltd. Other brands and product names are trademarks or registered trademarks of their respective holders. Product images are purely for illustrative purposes and may differ from the actual product. Specifications are subject to changes without prior notice. Copyright © 2024 Fida International (S) Pte Ltd.