prolink DS-3602 Smart LED Strip Installation Guide

June 3, 2024
PROLiNK

DS-3602 Smart LED Strip
Installation Guide

Package Contents

Starter kit

prolink DS-3602 Smart LED Strip - Starter kit

Extension

Mounting accessories kit| | | |
---|---|---|---|---
2m Starter kit| x 1| x 1| x 3| x 3
5m Starter kit| x 1| x 1| x 6| x 6
2m Extension| x 1| –| x 3| x 3

Notes:

  • The picture illlustrations in this document may differ from actual product.
  • If your package does not contain any of the above items, please contact your reseller immediately.

Overview

LED Strip Behaviour Description
Off Unit is Off
On (White / Colour / Blinking) Unit is On
Fast Blinking Unit is in Auto Add /EZ Mode Configuration
Slow Blinking Unit is in AP Mode Configuration
Activity Action Required
--- ---
To reset the LED Strip to factory default Press and Hold the button from

Smart Controller
To switch between Auto Add/ EZ Mode and  AP Mode configurations| Press and Hold the button from Smart Controller

Installation

A. Preparation

  1. Place the LED Strip and Phone within three feet of the router.
    Notes:
    • Make sure the phone is connected to the router through a 2.4GHz wireless network.
    • Smart LED Strip is operating only at 2.4GHz Wireless N standard.

  2. Download, install and create an account through the Prolink mEzee App. You can scan the QR code below to download from Google Store or Apple App Store. Alternatively, search for “mEzee”.

prolink DS-3602 Smart LED Strip - QR code

https://prolink2u.com/apps/PROLiNK_mEzee/

For Google Assistant / Amazon Alexa users:
Step 1. Complete the steps in this Quick Installation Guide
Step 2. Follow the setup instruction available from
https://prolink2u.com/smart-home/smart-lighting/ds-3602/download/

prolink DS-3602 Smart LED Strip - QR code 2

https://prolink2u.com/smart-home/smart-lighting/ds-3602/download/

B. Plug In

  1. Power ON the LED strip. Ensure that the light indicator on the device is flashing rapidly (which indicated that the device is ready to connect).

  2. Measure the area you wish to attach the LED strip to.
    Ensure that the area has a clean, solid surface.

  3. Measure the LED strip to the desired length, starting at the end closest to the connector, for the Smart Controller.
    Starting at the end closest to the connector for the Smart Controller.
    prolink DS-3602 Smart LED Strip - Installation Reminder: If you measure & cut from the opposite end, you will not be able to connect the LED strip to the Smart Controller.

  4. Locate the closest cut mark to your desired length of usage. Each strip has cutting marks on every 10cm apart. Use a sharp pair of scissors or blade and cut only along the cut mark.

LED Strip Adhesive Installation

  1. Be sure to thoroughly clean surface or wall with any standard rubbing alcohol before applying adhesive and let dry.

  2. Peel adhesive lining from the back of the light strip.

  3. Position LED strip upon selected surface and press down firmly for at least 30 seconds to ensure a strong hold.

C. Setting up the LED Strip

  1. Launch the mEzee App and login with your account
  2. Tap Add Device or + on the top right-hand corner
  3. If the Bluetooth on your mobile phone is switched On, proceed with Method A. If your mobile device does not have Bluetooth, proceed with Method B.

Method A: Auto Add Configuration

  1. Upon tapping Add Device or + from main screen, the app will start to discover devices.

  2. Tap Add.
    prolink DS-3602 Smart LED Strip - Configuration

  3. Select your Wi-Fi name, enter the Wi-Fi password, and tap Next.

  4. Once connected, proceed to name this device for easy reference and tap Done.
    prolink DS-3602 Smart LED Strip - Installation 5

Method B: AP Mode Configuration

  1. Select Lighting and tap DS-3602.
    prolink DS-3602 Smart LED Strip - Installation 6

  2. Toggle the top right-hand option to AP Mode if it shows otherwise.

  3. Ensure that the LED strip is blinking slowly. Otherwise, press and hold the button from the Smart Controller until the LED strip starts blinking slowly. Alternatively,  Power On and Off 3 consecutive times.

  4. Check “Confirm the indicator is blinking or breathing slowly” box, and tap Next.

  5. Select your Wi-Fi name, enter the Wi-Fi password and tap Next.
    prolink DS-3602 Smart LED Strip - Installation 7

  6. Tap Go to Connect and connect your mobile phone to PROLiNK-XXXX or SmartLife-XXXX SSID. If you get prompted with “SSID doesn’t have Internet access”, tap Connect and return back to the App.
    prolink DS-3602 Smart LED Strip - Installation 8

  7. Once connected, proceed to name this device for easy reference and tap Done.
    prolink DS-3602 Smart LED Strip - Installation 9

Notes:
Please set the length of LED Strip before control the features in mEzee, otherwise you may not able to get the desired features you intend to.

How to: Extend Light Strip Length (up to 10 Meter)
i) Using a small knife or blade, trim the protective plastic coating around the edge of the strip’s end.
ii) Slide the trimmed end into the extender connector compartment. Follow the attachment lip to ensure that the strip light is connected to the 4-pronged conductor correctly.
iii) Repeat these steps with the other end of the light strip and snap the connector closed.prolink DS-3602 Smart LED Strip - Installation
10

1. Open the LED strip connector and remove about 1cm of PU
coating with a box cutter| 2. Insert the strip underneath the metal tabs| 3. Make sure both LED strips are aligned

prolink DS-3602 Smart LED Strip - Installation 11

Notes:

  • If the LED strip is not functioning, check if the 4-pronged conducts are connected correctly with the LED strip’s copper area.

Frequently Asked Questions

Can I share with family and friends?****

Yes. You can share your bulbs with family and friends who will have access to control your bulbs, plugs, cameras, and other devices. In the app, press the Profile button and click on the “Device Sharing” button, and you will be able to give or revoke sharing permissions. In order to share, the other user should already have downloaded the app and registered a new account.

Can I group multiple devices together?****

Yes. You can group multiple devices of the same type together, by room, location, or however else you want. The same devices can be in multiple groups. For example, you may  create a light group specifically for your “Bedroom”, as well as a light group for the “Entire House”. The lights which are under the “Bedroom” light group can also be included  as part of the “Entire House” light group. From your main device list, click on one of the devices you want to group. Press the “•••” button on the topright for advanced settings, and click Create Group. You will then be able to choose which devices you would like to group together and will be able to rename them.

How many devices can I control?****

The app can control an unlimited amount of devices in an unlimited amount of locations. However, your router may have a limit of how many devices can be connected to one
router.

How do I rename my device?****

From your main device list, click on one of the devices you want to rename, press the “•••” button on the top right for advanced settings, and click Modify Device Name or  Modify Group Name (if applicable). You will then be able to rename your device accordingly.

The device appears offline or unreachable. what should I do?****

Make sure your Wi-Fi router is online and in range. Make sure you have the latest functionality by clicking “Check for firmware update” in your device settings.

What is the wireless range?****

The range of your home Wi-Fi is heavily dependent on your home router and the conditions of the room. Check your router specifications for the exact data range. You may  add a Prolink Extender to enhance and extend your Wi-Fi coverage if needed.

If my Wi-Fi/Internet is down, will my devices still work?****

Products need to be connected to Wi-Fi in order to use them remotely.

Address: PT. PROLINK INTIDATA NUSANTARA
JI. Cideng Barat No. 79 Jakarta Pusat 10150 – Indonesia

Telp. : (62-21) 34831777
Fax : (62-21) 34830788
Email : service@prolink.com.co.id

Kepada Yth.
Customer Service
PT. PROLINK INTIDATA NUSANTARA
JI. Cideng Barat No. 79
Jakarta Pusat 10150 – Indonesia

Worldwide Customer Care Centers

INDONESIA Office
PT PROLINK INTIDATA NUSANTARA
Walk-In : Jl. Cideng Barat No. 79, Jakarta Pusat 10150, Indonesia.
Telephone : +62 21 3483 1777
Email Support : support.id@prolink2u.com
MALAYSIA Office
FIDA SYSTEMS (M) SDN BHD
Walk-In : 29 Jalan USJ 1/31, 47600 Subang Jaya, Selangor Darul Ehsan, Malaysia.
Telephone : +60 3 8024 9151
Email Support : support.my@prolink2u.com
SINGAPORE Office
FIDA INTERNATIONAL (S) PTE LTD
Walk-In : Block 16 Kallang Place #06-02, Kallang Basin Industrial Estate, Singapore 339156.
Telephone : +65 6357 0668
Email Support : support@prolink2u.com
Technical Support Hotline
INDONESIA : +62 21 3483 1717
MALAYSIA : +60 3 8023 9151
SINGAPORE : +65 6357 0666

Note: Closed on Saturdays, Sundays and local/regional Public Holidays.

Register online for your Product Warranty atwww.prolink2u.com
Prolink is a registered trademark of Fida International (S) Pte Ltd. Other brands and product names are trademarks or registered trademarks of their respective holders. Product  images are purely for illustrative purposes and may defer from the actual product. Specifications are subjected to changes without prior notice.
Copyright © 2022 Fida International (S) Pte Ltd.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals