QUOIZEL TEN8624AB 3 Light 24.25 inch Aged Brass Bath Light Wall Light Installation Guide
- June 12, 2024
- QUOIZEL
Table of Contents
QUOIZEL TEN8624AB 3 Light 24.25 inch Aged Brass Bath Light Wall Light
Product Information
Specifications
- Model: TEN8624AB
- Released Date: 2023-09-26
- Maximum Wattage: 100W
- Bulb Base Type: Medium (E26)
- Bulb Type: Type A
Product Usage Instructions
-
Install Crossbar Assembly:
-
Wiring:
- Connect the white wire from the supply to the white wire from the fixture.
- Connect the black (or red) wire from the supply to the black wire from the fixture.
- Connect the ground wire from the supply to the ground wire from the fixture using the green ground screw.
-
Install Fixture Body:
-
Install Decorative Cup and Glass Shade.
-
Install Bulbs:
-
Install three correct bulbs according to fixture markings
and/or labels with a maximum wattage of 100W. -
Recommended Bulb Type: Type A, Medium (E26) base.
-
Your installation is now complete! Restore electricity and keep this sheet for future reference.
FAQ
- Q: What should I do if I need further assistance?
- A: You can call Quoizel Customer Care at 1-800-645-3184 (9:00 am – 5:00 pm EST) or visit www.quoizel.com for online support.
- Q: Can I use bulbs higher than 100W?
- A: It is not recommended to exceed the maximum wattage of 100W for safety reasons.
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble,
install or operate the product.
WARNING
- RISK OF ELECTRIC SHOCK – Before beginning installation, turn off electricity at the circuit breaker box or the main fuse box.
- RISK OF FIRE – Use bulbs specified by the markings and/or labels on the fixture.
CAUTION
- For your safety, read the instructions completely before beginning installation.
- If in doubt about electrical installation, consult a licensed electrician.
- Turn off the electricity to the fixture before replacing the bulb(s).
TOOLS REQUIRED
CARE AND MAINTENANCE
- Wipe clean using a soft, dry cloth or static duster. Always avoid using harsh chemicals and abrasives to clean fixture as they may damage the finish.
- If you need further assistance call Quoizel Customer Care at 1-800-645-3184 (9:00 am – 5:00 pm EST), or visit us online at www.quoizel.com.
PACKAGE CONTENTS
MOUNTING HARDWARE
INSTALLATION
Install Crossbar Assembly
- (2) Alternative Screws
- Alternative screws are provided to replace pre-assembled mounting screws if necessary.
Wiring
Install Fixture Body
Install Decorative Cup and Glass Shade
Install Bulbs
- Install three correct bulbs referring to fixture markings and/or labels for maximum wattage.
Recommended Bulb Type (not included)
Your installation is now complete! Restore electricity and save this sheet for future reference.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>