hansgrohe 32851XXX, 32855XXX Talis S Kitchen Mixers Instruction Manual
- October 30, 2023
- hansgrohe
Table of Contents
hansgrohe 32851XXX, 32855XXX Talis S Kitchen Mixer
Product Information
The product is a single-lever mixer with a hot water limiter. It can be used with continuous-flow water heaters and does not require a warm water lock in conjunction with them. The mixer can be connected to dishwashers and washing machines certified with the DVGW emblem without an additional fuse. The product comes with technical data, flow diagrams, operating pressure, recommended operating pressure, test pressure, hot water temperature, recommended hot water temperature, spare parts, and a test certificate. The mixer is available in different colors including chrome plated and stainless steel optic.
Product Usage Instructions
During installation, it is important to wear protective gloves to prevent crushing and cutting injuries. To avoid any issues, it is important to ensure that the hot and cold supplies have equal pressures. For single lever mixers, the hot water limiter can be adjusted by referring to page 32. It is important to note that silicone containing acetic acid should not be used. For cleaning recommendations, refer to the enclosed brochure. The mixer can be used together with hydraulically and thermally controlled continuous flow heaters if the flow pressure is at least 0.15 MPa. The mixer comes with a test certificate, spare parts, technical data, flow diagrams, and operating pressure information. The mixer can be assembled by referring to page 31.
Assembly
MODEL
Assembly
Safety Notes
- Gloves should be worn during installation to prevent crushing and cutting injuries.
- The hot and cold supplies must be of equal pressure.
32855XXX: Only dishwashers and washing machines certified with the DVGW emblem may be connected to the appliance connection valve without an additional fuse. If no consumer is connected to the appliance connection valve, it must be plugged.
Installation Instructions
The fitting must be installed, flushed, and tested after the valid norms!
Technical Data
- Operating pressure: max. 1 MPa
- Recommended operating pressure: 0,1 – 0,5 MPa
- Test pressure : 1,6 MPaB (1 MPa = 10 bar = 147 PSI)
- Hot water temperature: max. 80°C
- Recommended hot water temp.: 65°C
Hansgrohe mixers can be used together with hydraulically and thermically controlled continuous flow heaters if the flow pressure is at least 0,15 MPa.
Symbol Description
-
Du not use silicone-containing acetic acid!
-
To adjust the hot water limiter on single lever mixers, please see page 32. No adjustment is necessary when using a continuous-flow water heater.
-
For cleaning recommendations, see the enclosed brochure.
-
Dimensions
-
Flow diagram
-
operation
-
Spare parts
- XXX = Colors
- 000 = chrome plated
- 800 = stainless steel optic
-
Test certificate
-
Hansgrohe
-
Postfach 1145
-
D-77761 Schiltach
-
Telefon +49 (0) 78 36/51-1282
-
Telefax +49 (0) 7836/511440
-
E-Mail: info@hansgrohe.com .
-
Internet: www.hansgrohe.com.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>