JOHN LEWIS 12020111 Tripod Floor Lamp User Guide
- June 6, 2024
- John Lewis
Table of Contents
12020111 Tripod Floor Lamp
User Guide
Introduction
Thank you for purchasing this Tripod Floor Lamp.
Please read the instructions carefully before use to ensure the safe and
satisfactory operation of this product.
Warnings
This lamp is for indoor use only.
This product is Class II.
The supply cord cannot be replaced. If the cord is damaged, the floor lamp
should be destroyed in order to avoid a safety hazard.
Always use the correct type and rated power bulb. Never exceed the rated power
stated.
Dispose of used bulbs carefully.
Parts list
| Description | Image | Quantity |
|---|---|---|
| A Socket + Tubes | 1 PC | |
| B C Tubes | 6 PCS | |
| D Tube With Cord | 1 PC | |
| D-1 Tubes | 2 PCS | |
| E Shade | 1 PC | |
| F Socket Ring | 1 PC |
Recommended bulb
10 watt E27 LED bulb
Bulb is replaceable
Bulb not included
Product assembly
-
Carefully unpack the carton, making sure all parts are included before assembly. Place lamp parts on a flat surface.
NOTE: The tube shapes are different, tubes (B) and (C) are straight; tubes (D) and (D-1) are tapered at the bottom. -
Screw tube (B) into tube (A) until tight.
-
Screw tube (C) clockwise into the tube (B) until tight. Repeat for each leg.
-
Screw tube (D-1) clockwise into tubes (C) until tight.
-
Screw tube with cord (D) clockwise into the tube (C) until tight.
NOTE: You may need to pull any excess cord gently through the tube (D) -
Place shade (E) onto the socket and then screw on socket ring (F) to secure shade.
Caring for your product
We recommend cleaning with a soft dry cloth. Do not use abrasive materials as
these will damage the finish.
Replace bulbs from John Lewis or established brands of the same type and
compatibility.
Aftercare and Troubleshooting
Please ensure all screws and small pieces are properly tightened to the
product.
When changing a bulb, always switch off the mains and allow the bulb to cool
down before handling.
A bulb’s watt rating indicates how much energy it uses. The higher the watt,
the more energy it requires. Lumens is a measure of brightness. The higher the
number of lumens, the brighter the light.
Specification
Max. power: 60W
Voltage: 220–240V~50Hz
IP rating: 20
Weight: 3.3 kg
5 year guarantee
At John Lewis & Partners we test every light to high-quality standards so we are able to offer you a 5 year guarantee.
Recycling
This symbol indicates that this product should not be treated as normal household waste and it should be recycled. John Lewis & Partners do not operate instore take back, but as members of the Distributor Take Back scheme have funded the development and upgrade of recycling facilities across the UK. Please take it to your nearest collection facility or for further details contact your local council or visit www.recycle-more.co.uk.
John Lewis Partnership
171 Victoria Street
London SW1E 5NN
johnlewis.com
Made in China
Please retain these instructions for future reference.
References
- John Lewis & Partners | Department Store | Home, Fashion, Tech & More
- Everything you need to know to Recycle More