neighbor Sun Lounger Frame Box User Guide
- June 12, 2024
- neighbor
Table of Contents
neighbor Sun Lounger Frame Box
Product Information: Sun Lounger
The Sun Lounger is a piece of furniture designed for outdoor use. It consists of a teak wood frame and a cushion, both of which are packaged separately in boxes. The frame has two short legs and two wheel legs, which can be attached to the frame using 40mm hex bolts. The cushion is tied to the frame using metal eyelets.
Product Usage Instructions
Assembly Guide
Before assembling, make sure to have all the necessary components, including
the frame, cushion, legs, bolts, and Allenwrench. The assembly instructions
are divided into different sections:
Components
This section lists all the components that come with the Sun Lounger,
including the frame, cushion, legs, bolts, and Allen wrench. The items are
packaged separately in boxes.
Assembly Instructions
This section provides step-by-step instructions for assemblingthe Sun Lounger.
It includes details on how to connect the legs to the frame, stand the frame
upright, and tie down the cushion.
Assembly Tips
This section provides tips to make the assembly process easier and safer. It
recommends assembling on a soft surface, partly tightening bolts before fully
assembling modules, and lifting with caution.
Product Care
This section provides information on how to care for the teak wood frame. It
recommends cleaning it annually or bi-annually with Golden Teak Cleaner and
avoiding prolonging mildew growth by covering it when not in use.
Components
Frame Boxes: Sun Lounger Frame (1)
Cushion Boxes: Sun Lounger Cushion (1)
Parts
-
1X Frame
Sun Lounger Frame Box -
2X Wheel Leg
Sun Lounger Frame Box -
2X Short Leg
Sun Lounger Frame Box
Hardware
-
8X 40mm Hex Bolt
Sun Lounger Frame Box -
8X 40mm Hex Bolt
Tools
1X Allen Wrench
Sun Lounger Frame Box
Cushions
1X Sun Lounger Cushion
Sun Lounger Cushion Box
Assembly Tips
- Use caution when lifting
- Two-person lift is recommended. The boxes and product are both large and heavy.
- Lay everything out before you begin
- Getting familiar with all the components before assembly will make for a faster and easier assembly process.
Product Care
Caring for teak
- Unfinished teak will gradually change color from honey gold to a silver-gray patina. We encourage allowing the teak to turn color naturally and cleaning it annually or bi-annually. As for cleaning, we recommend Golden Teak Cleaner, which is specifically designed to kill mold and mildew spores inside teak.
- Avoid prolonging mildew growth. If left in the shade for extended periods, this can be common. If you live in a particularly humid or rainy climate, keep a closer eye on mildew growth and clean as needed.
- Covering your furniture when not in use will greatly prolong the lifespan of the wood.
Assemble on a soft surface
We recommend assembling your furniture on a soft surface such as a rug or a
towel. The wood frame can scratch against harsh textures like brick or
concrete.
Loose first, then tight
Partly tighten the hex bolts while assembling. After the modules are fully
assembled, tighten the bolts firmly. Keep in mind humidity levels can slightly
affect how the pieces fit together.
Caring for Sunbrella
Brush off dirt before it becomes embedded in the fabric and wipe up spills as
soon as they happen. Rinse thoroughly and air dry. Avoid scrubbing, stiff
bristle brushes, or any other abrasive cleaning method. Protect the area
around your furniture when using bleach or other chemical solvents that may
discolor non-Sunbrella fabrics. If fabric is wrinkled, use an iron on the
synthetic setting. As iron temperatures may vary, test a small area first
before ironing the entire piece. Do not use a steamer or an iron set to the
steam setting.
Fabric stain removal
- Blot (don’t rub) liquid spills with a clean, dry cloth. For oil-based spills, apply an absorbent such as corn starch then remove with a straight edge.
- Spray on a mild cleaning solution of soap (such as Woolite® or Dawn®) and water and lightly agitate with a sponge or gentle brush.
- Rinse the fabric thoroughly to remove all soap residue.
- Air dry.
- As needed, unzip and machine-wash covers.
Assembly Instructions
-
Connect legs to frame
Place the Frame on a soft surface facing down. Using the Allen wrench provided, fasten the Short Legs and Wheel Legs to the Frame with two 40mm Hex Bolts per leg. Wheel Legs should be installed on the same side as the metal eyelets on the frame, as shown in the picture. -
Stand upright
Lift and stand Frame upright.
-
Tie down cushions
Place Sun Lounger Cushion on Frame, then secure cushion with ties to metal eyelets. -
Complete!
Your Sun Lounger is now ready to use. Relax and enjoy!
Contact
If you have any questions or feedback, please contact us at support@hineighbor.com or visit our website at hineighbor.com.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>