MI Smart Band 6 User Manual
- June 7, 2024
- Mi
Table of Contents
Mi Smart Band 6 User Manual
Read this manual carefully before use, and retain it for future reference.
Product Overview
Installation
- Insert one end of the tness tracker into the slot from the front of the wristband.
- Press down on the other end with your thumb to push the tness tracker completely into the slot.
Wearing
- Comfortably tighten the band around your wrist, about 1 finger width away from your wrist bone.
If the band can easily move up and down the wrist, or the heart rate sensor
cannot collect the data, try tightening the wristband.
The band can comfortably fit around the wrist.
Connecting with APP
-
Scan the QR code to download and install the app. Add the Mi Smart Band 6 to the app first before you start using it.
(Android 5.0 & iOS 10.0 or above)
ttps://region.hlth.io.mi.com/abroad_download?redir=hmbrace -
Log into your Mi account in the app, and follow the instructions to connect and pair the band with your phone. Once the band vibrates and a pairing request is displayed on its screen, tap to complete the pairing with your phone.
Note: Make sure the Bluetooth on your phone is enabled. Hold the phone and the band close to each other during pairing.
Usage
After successfully pairing with your device, the band will start tracking and
analyzing your daily activities and sleeping habits. Tap the screen to light
it up.
Swipe up or down to view various functions such as PAI (personal activity
intelligence), exercise data, and heart rate measurements.
Swipe right to return to the previous page.
Disassembly
Remove the band from your wrist, hold on to each end and pull on the wristband until you see a small gap between the fitness tracker and the wristband. Use your finger to pop the fitness tracker out of its slot from the front side of the wristband.
Charging
Recharge your band immediately when the battery level is low.
Precautions
When using the band to measure your heart rate, please keep your wrist still.
Mi Smart Band 6 has a water resistance rating of 5 ATM. It can be worn during
handwashing, in the swimming pool, or while swimming near the shore. It cannot
be used, however, in hot showers, saunas, or diving.
The touchscreen of the band does not support underwater operations.
When the band comes into contact with water, use a soft cloth to wipe away
excess water from its surface before use.
During daily use, avoid wearing the band too tightly and try to keep its
contact area dry. Please clean the wristband regularly with water.
Please stop using the product immediately and seek medical assistance if the
contact area on your skin shows signs of redness or swelling.
This watch is not a medical device, any data or information provided by the
watch should not be used as a basis for diagnosis, treatment, and prevention
of diseases.
Specifications
Product: Smart Band
Name: Mi Smart Band 6
Model: XMSH15HM
Fitness Tracker Net Weight: 12.8 g
Fitness Tracker Dimensions: 47.4 x 18.6 x 12.7 mm
Wristband Material: Thermoplastic elastomer
Clasp Material: Aluminum alloy
Adjustable Length: 155–219 mm
Compatible with: Android 5.0 & iOS 10.0 or above
Battery Capacity: 125 mAh
Battery Type: Lithium polymer battery
Input Voltage: DC 5.0 V
Input Current: 250 mA Max.
Water Resistance: 5 ATM
Operating Temperature: 0°C to 45°C
Max. Output: ≤13 dBm
Bluetooth Frequency: 2400–2483.5 MHz
Wireless Connectivity: Bluetooth® Low Energy 5.0
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Xiaomi Inc. is under license. Other trademarks and trade names are those of their respective owners.
WEEE Disposal and Recycling Information
All products bearing this symbol are waste electrical and electronic equipment
(WEEE as in directive 2012/19/EU) which should not be mixed with unsorted
household waste.
Instead, you should protect human health and the environment by handing over
your waste equipment to a designated collection point for the recycling of
waste electrical and electronic equipment, appointed by the government or
local authorities. Correct disposal and recycling will help prevent potential
negative consequences to the environment and human health.
Please contact the installer or local authorities for more information about
the location as well as terms and conditions of such collection points.
EU Declaration of Conformity
Hereby, Anhui Huami Information Technology Co., Ltd., declares that the radio
equipment type XMSH15HM is in compliance with Directive 2014/53/EU. The full
text of the EU declaration of conformity is available at the following
internet address:
http://www.mi.com/global/service/support/declaration.html
Manufactured for: Xiaomi Communications Co., Ltd.
Manufactured by: Anhui Huami Information Technology Co., Ltd.
(a Mi Ecosystem company)
Address: 7/F, Building B2, Huami Global Innovation Center, No. 900, Wangjiang
West Road, High-tech Zone, Hefei City, China (Anhui) Pilot Free Trade Zone
For further information, please go to www.mi.com
For regulatory information, product certification, and compliance logos
related to Mi Smart Band 6, please go to Settings > Regulatory.
Battery Safety
- This device is equipped with a built-in battery that cannot be removed or replaced. Do not disassemble or modify the battery by yourself.
- Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion.
- Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of fiammable liquid or gas.
- A battery subjected to extremely low air pressure that may result in an explosion or the leakage of fiammable liquid or gas.
Warranty Notice
As a Xiaomi consumer, you benefit under certain conditions from additional
warranties. Xiaomi ofiers specific consumer warranty benefits which are in
addition to, and not instead of, any legal warranties provided by your
national consumer law. The duration and conditions related to the legal
warranties are provided by respective local laws. For more information about
the consumer warranty benefits, please refer to Xiaomi’s oficial website
https://www.mi.com/en/service/warranty/.Except as prohibited by laws or
otherwise promised by Xiaomi, the after-sales services shall be limited to the
country or region of the original purchase. Under the consumer warranty, to
the fullest extent permitted by law, Xiaomi will, at its discretion, repair,
replace or refund your product. Normal wear and tear, force majeure, abuse or
damage caused by the user’s negligence or fault are not warranted. The contact
person for the after-sale service may be any person in Xiaomi’s
authorized service network, Xiaomi’s authorized distributors or the final
vendor who sold the products to you. If in doubt please contact the relevant
person as Xiaomi may identify.
The present warranties do not apply in Hong Kong and Taiwan.
Products which were not duly imported and/or were not duly manufactured by
Xiaomi and/or were not duly acquired from Xiaomi or a Xiaomi’s oficial seller
are not covered by the present warranties. As per applicable law you may
benefit from warranties from the non-oficial retailer who sold the product.
Therefore, Xiaomi invites you to contact the retailer from whom you purchased
the product.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>