PATLITE LFH-M2 100mm LED Signal Light Owner’s Manual
- June 12, 2024
- PATLITE
Table of Contents
PATLITE LFH-M2 100mm LED Signal Light
Product Usage Instructions
Installation
- The signal light can be mounted indoors or outdoors in an upright, inverted, or sideways position.
- Ensure it is mounted securely and in accordance with the provided Instruction Manual using the included accessories.
Power Connection
- Connect the signal light to a power source within the specified voltage range.
- Ensure that the power supply meets the rated voltage requirements to avoid damage to the device.
Maintenance
- Regularly check the signal light for any signs of damage or wear.
- Clean the light as needed using a soft, dry cloth. Do not use abrasive cleaners or solvents.
FAQ
- Q: Can the signal light be used in wet environments?
- A: The signal light can be used in wet environments but should only be mounted upright in such conditions to maintain its protection rating.
- Q: What is the recommended ambient temperature range for operation?
- A: The recommended operating ambient temperature range is from ’20°C to +60°C.
- Q: How do I determine the correct mounting direction for the signal light?
- A: The signal light can be mounted upright, inverted, or sideways based on your installation needs. However, in wet environments, it should only be mounted upright.
SPECIFICATIONS
General Specifications
| Product Name | φ100 LED Signal Light |
|---|---|
| Model | LFH-M2 |
| Rated Voltage | 100V / 120V / 200V / 230V AC (50/60Hz) |
| Operating Voltage Range | 90V AC ～ 250V AC |
Rated Current Consumption
|
Typ.
| 0.10A (at 100V AC)
0.10A (at 120V AC)
0.06A (at 200V AC)
0.06A (at 230V AC)
Max.
| 0.12A (at 100V AC)
0.12A (at 120V AC)
0.07A (at 200V AC)
0.07A (at 230V AC)
Inrush Current| Approx.14A (Approx.2msec)
Rated Power
Consumption
| Typ.| 5.7W
Max.| 6.8W
Operating Ambient Temperature| -20℃ ～ +60℃
Operating Ambient Humidity| Less than 90% (No condensation)
Storage Ambient Temperature| -30℃ ～ +70℃
Storage Ambient Humidity| Less than 90% (No condensation)
Mounting Location| Indoors and Outdoors
Mounting Direction| Upright, Inverted and Sideways (In a wet enviroment,
Upright only)
Protection Rating| IP 66 (IEC 60529)
| Environmental Condition| Upright Mounting
Vibration Resistance| 20m/s2
Insulation Resistance| More than 4MΩ at 500V DC between live part and non-
current carrying metallic part
Withstand Voltage| 4000V AC applied for 1min between live part and the non-
current carrying metallic part without breaking insulation
Flashing Rate| 110±10 Flashes Per Minute (Triple Flash Pattern)
Luminous Intensity| Red ：112cd or more / Amber ：117cd or more / Green ：240cd
or more
Blue ：52cd or more / White ：257cd or more
Mass (Tolerance ±10%)| 610g
Outer Dimensions| Refer to the Outer Dimension Drawing
Conformity Standards| FCC Part15 SubpartB Class A
Remarks| There are no contents of controlled substances exceeding the
threshold for the RoHS Directive.
Accessaries: Spring Washer（x3）, Washer（x3）, Nut（x3）, Instruction Manual
Product Overview
Dimensions
Installation Dimensions 11:21
Wiring
Wiring Example
- To mount the product in the inverted position, seal the Mounting bolts(Part-A) and Wire Exit Hole (Part-B) to insulate from water intrusion.
Sealing Instruction Example
Documents / Resources
|
PATLITE LFH-M2 100mm LED Signal
Light
[pdf] Owner's Manual
LFH-M2 100mm LED Signal Light, LFH-M2, 100mm LED Signal Light, LED Signal
Light, Signal Light, Light
---|---