TESLA 32M325BH LED TV 32 Inch User Guide
- June 12, 2024
- Tesla
Table of Contents
32M325BH LED TV 32 Inch
User Guide
OPERATING INSTRUCTION
Please read these instructions before operating your set and retain them
for future reference.
WARNING AND PRECAUTIONS **
**
Warning
Risk of electric shock Do not open
Warning: To avoid the risk of electric shock, do not remove: cover (or
back).No user-serviceable parts inside. Refer servicing to qualified service
personnel.
The lightning flash with arrowhead symbol, within an equilateral
triangle is intended lo alert the user lo the presence of uninsulated
“dangerous voltage within the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to a person.
The exclamation point within an equilateral triangle is intended to
alert the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
WARNING: TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO
RAIN OR MOISTURE.
CAUTION: TO ENSURE PERSONAL SAFETY, OBSERVE THE FOLLOWING RULES REGARDING
THE USE OF THIS UNIT.
- Operate only from the power source specified on the unit.
- Avoid damaging the AC plug and power cord
- Avoid improper installation and never position the nit where good ventilation is unattainable.
- Do not allow objects or liquid into the cabinet openings.
- In the event of trouble, unplug the unit and call a service technician. Do not attempt to repair it yourself or remove the rear cover.
Changes or modifications not approved by JVC could void the warranty.
- When you don’t use this TV set for a long period of time, be sure to disconnect both the power plug from the AC outlet and antenna for your safety.
- To prevent electric shock do not use this power plug with an extension cord, receptacle or other outlet unless the blades can be fully inserted to prevent blade exposure.
Do not attempt to service the product yourself
CAUTION To prevent electricals, do not open the TV casing There are no
user serviceable parts inside. Please refer to qualified service personnel for
repairs.
IMPORTANT SAFETY INSTRUCTIONS
-
Read these instructions.
-
Keep these instructions.
-
Heed all warnings.
-
Follow all instructions.
-
Do not use this unit near water.
-
Clean only with dry cloth.
-
Do not block any ventilation openings. Ventilation should not be impeded by covering the ventilation openings with items such as newspapers, table-cloths, curtains etc. There must be a minimum distance of 5cm clear space around the unit at all times to ensure proper ventilation.
-
Do not install near any heat sources such as radiators, heat registers, stoves or other apparatus (including amplifiers) that produce heat. No naked flame sources such as lit candles, should be placed on or near the unit
-
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles and the point where they exit from the unit.
-
Only use attachments/accessories specified by the manufacturer.
-
Use only with a cart, stand, tripod, bracket or table specified by the manufacturer or sold with the unit. When a cart is used, use caution when moving the cart/unit combination to avoid injury from tip-over.
-
Unplug this unit during lightning storms or when unused for long periods of time.
-
Refer all servicing to qualified service personnel. Servicing is required when the unit has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the unit, the unit has been exposed to rain or moisture, does not operate normally or has been dropped.
-
The unit should not be exposed to dripping or splashing and no objects filled with liquids, such as vases, should be placed on the unit.
-
Place the television on a stable, flat surface. Failure to do so can result in the television falling, causing injury.
-
Do not allow young children to play around or on the television. Do not hang from the unit Failure to do so can result in the television falling, causing injury.
-
Do not allow young children to play with the plastic bag that came with the television when you unpacked it. Failure to do so can result in suffocation, which may lead to death.
-
Avoid improper installation and never position the unit where good ventilation is impossible. When installing this unit, distance recommendations must be maintained between the set and the wall, as well as inside a tightly enclosed area or piece of furniture. Keep to the minimum distance guidelines shown for safe operation.
-
Cautions for installation
– Do not tilt the unit towards the left or right or towards the back.
– Ensure the power cord is out of the path of foot traffic.
– The unit will generate a slight amount of heat during operation. Ensure that sufficient space is available around the unit to allow satisfactory cooling.
– Have two people remove the unit from the box with the screen facing away from you. It’s possible your clothing (such as a belt buckle or button) may scratch the front of the unit. Do the same when moving the unit to another location. -
T his unit shall be connected to a mains socket outlet with a protective earthing connection.
-
Make enough room for inserting and removing the power plug. Place the unit as close to the outlet as possible. The main power supply for this unit is controlled by inserting or removing the power plug. Physically disconnecting the power plug is the only way to completely disconnect the unit from the mains power source.
-
Batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
-
When this unit is connected to the wall outlet, it is always on standby even when all the LED lamps are not lit. To shut down the unit, unplug the unit from the wall outlet.
-
If the supply cord is damaged, it must be replaced before further use by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
-
Always place the Non furniture that can safely support the TV. Make sure the ends of the TV do not overhang the edge of the supporting furniture.
-
Do not place the Non tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the TV to a wall or other suitably strong support.
-
Do not stand the TV on cloth or other materials placed between the TV and the supporting furniture. 28. Where the mains plug is used as the disconnect device, the disconnect device shall remain readily operable.
Important information
Televisions that are not positioned in sufficiently stable locations can
present potential falling hazards. To avoid injuries, particularly to
children, take the following simple precautions
- Place this television only on furniture that can safely support it
- Use only a cabinet or stand recommended by the manufacturer of the television.
- Ensure the television does not hang over the edge of supporting furniture.
- Do not place the television on tall furniture (such as cupboards or bookcases) without anchoring both the furniture and the television to a suitable support
- Do not place cloth or other materials between the television and the supporting furniture,
- Do not let children climb on furniture to reach the television or its controls;
REMOTE CONTROL OPERATION
Installing Batteries
- Slide in the direction shown by the arrow in Image 1 below to open the cover of the batteries on the back of the remote control.
- Load two AAA alkaline batteries in the compartment.
- Replace the cover of the batteries.
Precautions
- Make sure that there is no obstacle bet ween the remote control and television set.
- Keep the remote control away from heat sources and humid areas to ensure effective performance of the remote control.
- As strong light may interfere with the signals, change your position to operate the remote control if the television cannot be turned on or off as you expect.
- Make sure that two AAA 1.5V alkaline batteries are loaded correctly.
TERMINAL INTERFACE
| AV input
External AV Signal Input And Relevant Right/Left Sound Channel| | PC AUDIO
INPUT
VGA input and audio input when VGA input
---|---|---|---
| AV output
TV AV Signal output And Relevant Right/Left Sound Channel (Some models without
this interface)| | EARPHONE output
When earphones are plugged in, speakers are disabled (Some models without this
interface)
| Y Pb Pr input
Connect to the composite terminal of your DV DNCR (Some models without this
interface)| | USB input
Connect a USB device here to play its media files
| HDMI input
Digital signal input from HDMI video connector.| | COAXIAL
Connect the SPDIF receiver. (Some models without this interface)
| ANT7S
Connect the antennal/cadle tv input (75NHF/UHF)| | WART input
Standard, it supports composite and RGB signal insult is a connection for
Europeans (Some models without this interface)
| VGA input
PC analog signal input| | CI
Connect the Data TV decryption card
REMOTE CONTROL
PPOWER: Switch On/Off the LED when at standby mode
SOURCE: Press the button display Source menu
NUMBER: Press these butions to select the LED program you want o enter or
input password
-/–: press this button Firstly when the channel to be selected is two or
three figures
EPG: Display the EPG
VOL+NOL-: Press two buttons to directly to turn up or turn down the sound
volume level.
CH#+/CH-: Press two buttons to directly to adjust the LED program.
P.MODE: To set the picture mode.
S.MODE: To set the sound mode.
MTS/II: Press to select the MTS mode.
SUB- Display the subtitle witch is broadcast with the program
FAV: Press to add or remove your favorite
SOURCE: Displays the source last of input signal
DISPLAY: Displays the Channel Bar
Confirmation button / Select the OSD menu option.
MENU: Accesses the Main Menu, or return to the upper level of a sub-menu.
EXIT: Exits the current menu or function.
Red/Green/Yellow/Blue: Press these buttons directly to select
corresponding function on the screen
SIZE / : Fast revind.
INDEX / : Fast forward.
SUB.PG / : Go to previous chapter of media file
REVEAL / **: Go to next chapter of media file
TEXT/ CC/HI : Play or pause.
HOLD / : Stop playing
REC: Record
T.SHIFT:** When the user leaves, it will auto stop the TV program and
record the program into the remote store device. Available when the PVR
function is effective).
MAIN MENU OPERATION
Channel Menu-DTV
Press MENU button to display the main menu.
Press button to select CHANNEL in the main menu.
- Press button to select the option that you want to adjust in the CHANNEL menu.
- Press Enter button to adjust.
- After finishing your adjustment, Press Enter button to save and return to the previous menu.
Auto Tuning
Press button to select Auto Tuning, then press Enter/ button to enter.
AN Manual Tuning
-
Current CH
Set the channel number. -
Color System
Select the color system. (Available System: AUTO, PAL, SE CAM) -
Sound System
Select the Sound system. -
Fine Turn
Adjust the frequency of the channel finely. -
Search
Start searching channel.
DTV Manual Tuning
Press button to select DTV Manual Tuning, then press Enter button to enter
sub-menu.
Press button to select channel, then press Enter button to search program.
Program Edit
Press button to select Program Edit, then press Enter button to enter sub-
menu.
The three colored key is the shortcut key for programming the channel.
First press to highlight the channel you want to select, then:
- Press the Red button to delete the program in the list.
- Press the Yellow button to move the channel in favorite list.
- Press the Blue button to skip the selected channel.
- Press Fav button to add or remote the channel to your favorite list. (Your TV set will skip the channel automatically when using CH+/- to view the channels.)
Schedule List
Press button to select Schedule List, then press Enter button to enter sub-
menu. It is available in source.
Press the Red button to delete the program schedule.
Press the Yellow button to add the program schedule.
Press the Blue button to edit the program schedule.
Press button to select the menu to set.
Type: Select the schedule type: Reminder/Recorder.
Mode: Select remind frequency: Once/Everyday/ Weekly.
Start Time: Select the time to start reminding/ recordings.
End Time: Select the time to end reminding/ recording.
When the time appointment is conflict, it will produce a warning message
before jump to the appointment program.
Signal Information
Press button to select Signal Information, press the Enter button to see the
detail information about the signal. Only available when there is signal in
DTV.
Picture Menu
Press MENU button to display the main menu.
Press button to select PICTURE in the main menu.
- Press button to select the option that you want to adjust in the PICTURE menu.
- Press OK button to adjust.
- After finishing your adjustment Press MENU button to save and return back to the previous menu.
Picture Mode
Press button to select Picture Mode, then press OK button to enter sub-menu.
You can change the value of contrast, brightness, color, sharpness and tint
when the picture is in Personal mode.
TIPS: You can press PMODE button to change the Picture Mode directly.
Contrast/ Brightness/ Color/ Tint / Sharpness
Press button to select option, then press button to adjust.
Contrast: Adjust the highlight intensity of the picture, but the shadow
of the picture is invariable.
Brightness: Adjust the optical fiber output of the entire picture, it
will effect the dark region of the picture.
Color: Adjust the saturation of the col or based on your own like.
Tint: Use in compensating color changed with the transmission in the NTSC
code.
Sharpness: Adjust the peaking in the detail of the picture.
Color Temp
Change the overall color cast of the picture.
Press button to select Col or Temperature , then press OK button to enter sub-
menu.
Press button to select. (Available Picture mode: Cold I, Normal, Warm).
You can change the value of red, green and blue when color temperature is in
User mode.
Cold: Increase the blue tone for the white.
Normal: Set to default col or temperature.
Warm: Increase the red col or for the white.
Noise Reduction
Filter out and reduces the image noise to improve picture quality.
Press button to select Noise Reduction, then press OK button to enter sub-
menu.
Off: Select to turn off video noise detection.
Low: Detect and reduce low video noise.
Middle: Detect and reduce moderate video noise.
High: Detect and reduce enhanced video noise.
Default: Set as Default.
Sound Menu
Press MENU button to display the main menu.
Press button to select SOUND in the main menu.
- Press button to select the option that you want to adjust in the SOUND menu.
- Press Enter button to adjust.
- After finishing your adjustment Press Enter button to save and return to the previous menu.
Sound Mode
Press button to select Sound Mode, then press Enter button to enter sub-menu.
Press button to select.
You can change the value of Treble and Bass when the sound is in Personal
mode.
TIPS: You can press SMODE button on the remote control to change the
Sound Mode directly.
Standard: Produces a balanced sound in all environments.
Music: Preserves the original sound. Good for musical programs.
Movie: Enhances treble and bass for a rich sound experience.
Sports: Enhances vocals for sports.
Personal: Select to customize sound settings.
Note: The treble and bass are only available in Personal mode, you can
adjust them as you like.
Balance
Press button to select option, Press button to adjust.
Auto Volume level
Press button to select Auto Volume Level, then press button to select On or
Off.
SPDIF Mode
Press button to select SPDIF Mode, then press button to select Off/ PCM/ Auto.
AD Switch
Press button to select AD Switch, then press button to select On or Off.
Amblyopia function for the blind, the tracks will be mixed describe the
current screen. It needs code stream to support.
NOTE:
Balance: This item can adjust the speaker’s output, it enables you to
listen to best at your position.
Auto Volume: This item is used for reducing the difference between
channel and program’s volume automatically.
Problem | Solution |
---|---|
No Power | • Check the AC cord of TV is plus in or not. If still no power, |
please pull out the plug and replug in after 60 seconds. And open the TV again
Signal receive not properly| • To cause double image or phantom if there has
high building or high mountain round TV. You can adjust image effect by
manually operation: consult instruction of vernier regulation or change the
direction of external antenna.
• If you use the indoor antenna, under certain circumstance, receive will be
more difficult. So you can change the direction of the antenna to adjust the
image effect. If can’t change image receiving effect either, you have to use
external antenna.
No picture| • Check the antenna at the back of TV is connected properly or
not.
• Try to select other channels and check whether the TV problem itself or not
Video is ok without audio| • Increase the volume.
• Check the TV is in mute mode or not, and please press the mute button to
make sound resume.
Audio is ok color error or no picture| • Increase contrast and brightness.
Snow statics picture and noise| • Check the antenna at the back of TV is
connected or not.
Level broken line| • Vacuum, such as hair drier, Maybe has electrical
appliance interfere. Please tum off these kinds of electrical appliance,
cleaner and so on.
Image or-Dual “simulacrum” The TV no response with the Remote| • Perhaps the
location for the antenna is not good. Use the tall beamed antenna can be
improved quality of the display image.
• Operate the remote direct to the remote sensor on the TV. If still no
response for the TV, please check if the plastic bag on the remote take or
not. And check if the location for the battery is correct. Change the new
battery.
• The TV will shift to the STAND BY if no response from the remote in the few
minutes.
NO Video In (PC Mode)| • Please check if the display cable connect to the VGA
corrected.
• Please check if there has the bend on the display cable
Vertical twinkling (PC Mode}| • Enter the main menu. Use the clock regulator
for the video display noise to eliminate the vertical line.
Horizontal ripping (PC Mode)| • Adjust the Audio sound horizontal in the main
menu to clear the horizontal ripping line.
The screen is too bright or too dark (PC Mode)| • Adjust the contrast ratio or
brightness in the main menu.
PC Function no response| • Check the computer setting in the state of
compatible display resolution
Ripping line in RCA connecting| • Please use good quality connecting cable.
Problem still exist| • Unplug the power cable and wait for 30 seconds, then
connect. If there is some problem with our TV, do not repair it by yourself,
please contact with the customer service canter.
There will be complete picture and the brightness will come down if the TV is
in Note. So please do not keep the TV in a state of same, the static picture
for too long time. Menu or same picture that has much difference in brightness
and contrast ratio for too long time.
Note: TV panel is built with very high precision technology giving you
fine picture details in vibrant color. Occasionally, a few non-active pixels
may appear on the screen as fixed point of red, green, blue or white. Please
note this does not affect the performance of the product.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>