PATLITE ADP-001C AC Adapter Instruction Manual
- June 1, 2024
- PATLITE
Table of Contents
GA000949_ 01
AC Adapter
TYPE ADP-001C
Instruction Manual
ADP-001C AC Adapter
Notice to Customer
Thank you very much for purchasing our PATLITE products.
- Before using this product, thoroughly read the “AC Adapter [ADP-001] Instruction Manual” included with the product, as well as this manual, to ensure proper use.
- If there are any questions concerning this product, refer to the contact information at the end of this document and contact your nearest PATLITE Sales Representative.
To the Contractor
- Prior to installation, read this manual thoroughly to ensure correct use.
- Return this manual to the customer.
Before You Begin
About Safety Symbols
-
To prevent injuries to the user and other personnel, as well as to prevent damage to assets, note the following.
-
The following symbols classify warnings and cautions, and describe the level of harm and damage that will occur when the corresponding instructions are ignored
WARNING
This symbol indicates, “Failure to follow the instructions may lead to death or serious injury.”
CAUTION
This symbol indicates, “Failure to follow the instructions may lead to injury or property damage.” -
The following symbols classify and describe the content of associated messages.
This symbol identifies “Prohibited” operations that should never be carried out.
This symbol identifies “Mandatory” instructions that should always be carried out.
Safety Precautions
- Before using this product, thoroughly read the “AC Adapter [ADP-001] Instruction Manual” included with the product, as well as this manual, to ensure proper use.
WARNING
To prevent accidents, do not use this product other than for its
intended purpose and do not run operations or maintenance other than those
described in this manual.
Do not modify or disassemble this product. Failure to follow these
instructions could result in fire or electric shock.
Do not use this product when there is condensation. Failure to follow
these instructions could result in fire or electric shock.
Turn off the power before wiring. Failure to follow this instruction
could result in electric shock.
CAUTION
Do not use this product near fire, in hot or humid environments, or where
corrosive or flammable gas is present.
Do not use thinners, benzine, gasoline, oil, chemicals, and so on to
wipe away dirt on this product. Failure to follow this instruction could
result in discoloration and deterioration. Wipe with a soft cloth, dampened
with water and wrung tightly.
****Pay close attention to the polarity of the power supply before
connection. Connecting the power supply incorrectly could result in product
failure.
Conformity requirements
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These imits are
designed to provide reasonable protection against harmful inerference in a
residentialinstallation. This equipment generates, uses and can radiate radio
frequency energy and, ifnot installed and used in accordance with the
instructions, may cause harmiul interference to radio communications. However,
there is no guarantee that inerference will ot occur in a particular
instalation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by tuming the equipment off and
on, the user s encouraged to try to correct the interference by one or more of
the following
measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radiofTV technician for help.
(Responsible party in U.S.A.) PATLITE U.S.A. Corporation, 20130 S.
Western Ave. Torrance, CAS0501, USA. Website
Address:www.paite.com
Package Contents
Connection Method Manual”
For detailed information on how to use AC plugs, refer to “AC Adapter [ADP-001] Instruction
- Connect the extension cable lead wires to the power input terminal of the product.
- For information about power input terminal wiring, refer to the Instruction Manual of the particular product. 2. Connect the extension cable and AC adapter, then tie them together with cable ties (to prevent disconnecting the cable).
- Use care and avoid applying excessive force when tying cables with cable ties. 3. Assemble the AC plug with the AC adapter and plug it into the power outlet.
- Check if the AC plug assembly is secure.
- Do not work with wet hands or in dusty places. Moisture or dust on the contacts may cause electric shock or fire.
- Periodically wipe away any dust and grime around the AC plug. Failure to follow these instructions could result in fire.
PATLUITE Corporation
G2j
PATLUITE Corporation >Head office | www.patlite.com/ |
---|---|
PATLITE (U.S.A.) Corporation | www.patlite.com/ |
PATLUITE Europe GmbH Germany | www.patlite.eu/ |
PATLITE (SINGAPORE) PTE LTD | www.patlite-ap.com/ |
PATLITE (CHINA) Corporation | www.patlite.cn/ |
PATLITE KOREA CO., LTD. | www.patlite.co.kr/ |
PATLITE TAIWAN CO., LTD. | www.patlite.tw/ |
PATLITE (THAILAND) CO.,LTD. | www.patlite.co.th/ |
PATLITE MEXICO S.A. de C.V. | www.patlite.com.mx/ |
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>