PATLITE SZ-010 Circular Bracket Instruction Manual

June 4, 2024
PATLITE

PATLITE SZ-010 Circular Bracket

SZ-010, and SZ-011 apply to the below table.

INSTALLATION

Before wiring, please mount it correctly as follows:

  1.  Please loosen the hexagonal hole screws on the side of the bracket. (Please get the hexagonal wrench ready. (The opposite side 2mm.))
  2.  Please remove the attached nuts on the pole.
  3.  Please insert the pole into a bracket from the top to the bottom.
  4.  Please fix the pole with the hexagonal hole screws on the side of the bracket.
    (Caution)
    Please check periodically that the hexagonal hole screws are not loosening. If they are loosening, please tihgten.

Dimensions

Specifications may change without notice due to continual product improvement.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals