PATLITE WE-LAN Wall Mount Signal Tower Instruction Manual

June 12, 2024
PATLITE

PATLITE-LOGO

PATLITE WE-LAN Wall Mount Signal Tower

PATLITE-WE-LAN-Wall-Mount-Signal-Tower-PRO

Notice to customer

  • Thank you very much for purchasing our PATLITE product.
  • This product requires installation and wiring work. Always have  Installation and wiring performed by a professional contractor.
  • Read this manual thoroughly before performing maintenance, repairs or Inspections.
  • If there are any questions concerning this product, refer to the contact information at the end of this document and contact your nearest PATLITE Sales Representative.
  • For instructions on how to use this product, download the Instruction Manual from our website.
  • Before use, please update your device to the latest firmware version. Updating improves product reliability and enables you to use any new features. You can download the latest version of the firmware by registering as a member from our website.
  • Regularly log in to My Page to make sure that you have the latest version of the firmware. Website Address: www.patlite.com.

WARNING: Always request a professional contractor to perform installation and wiring. Failure to follow this instruction may lead to fire, electric shock, or falling objects.
CAUTION: To clean the product, use a soft cloth moistened with water to avoid scratches. (Do not wipe with thinners, benzine, gasoline, or oil. Failure to follow this instruction may lead to discoloration or deterioration.)

To the Contractors

  • Read this manual carefully prior to installation.
  • Return this manual to the customer.
  • If there are any questions concerning this product, refer to the contact information at the end of this document and contact your nearest PATLITE Sales Representative.

Before you begin

About safety symbols

  • Following the guidelines on this manual are important in preventing injury or damage to users and property.
  • Below are a list of key words that describe the severity of potential consequences when instructions are not followed properly.
  • Warning: This symbol indicates, “Failure to follow the instructions may lead to death or serious injury.
  • Caution: This symbol indicates, “Failure to follow the instructions may lead to injury or property damage.”

The following symbols explain the types of precautions that need to be followed.

  • This symbol identifies “Prohibited” operations that should never be carried out.
  • This symbol identifies “Mandatory” instructions that should always be carried out.

Safety precautions

  • WARNING

    • Observe the following to prevent short-circuits, electric shock, and damage:
    • Turn off the power before wiring or repairs, including replacement of the fuse.
    • Install the product correctly. (Do not leave the cover off. Do not use with the cover off.) ISi Do not use this product where there is condensation.
    • Failure to follow this instruction could result in fire or electric shock.
    • If installing this product requires construction, have the work done by a professional contractor.
    • Failure to follow this instruction may result in electric shock. fire, or falling objects.
    • This product is not intended for use in facilities or equipment that require a high degree of reliability and which may affect human life, either directly or indirectly.
    • We cannot be held responsible in the event of injury, death, or property damage that may result in the use of this product in facilities, equipment. or control systems.
    • To prevent injuries and property damage that could result from product failure or malfunction, ensure sufficient safety by using this product together with other equipment.
    • When using this product for the purpose of maintaining safety, inspect it daily.
    • Use this product with other equipment in the unlikely event of product failure or malfunction.
    • Do not apply voltage that exceeds the acceptable range.
    • If you apply more than the rated voltage, internal circuits will be damaged.
    • Failure to follow this instruction could result in fire or electric shock.
    • Do not use this product to support your weight while climbing onto a machine.
    • Mount the product so that ii is clear of any moving parts – such as a machine cover.
    • If an unusual condition occurs while using this product (ex: smoke emission, heat generation, odor, unusual sound), stop the application, disconnect the power, and contact your PATLITE Sales Representative.
    • To prevent accidents when operating or maintaining this product, follow all general safety guidelines in addition to the safety guidelines described in this manual.
    • PATLITE can not predict all circumstances of hazards while using this product. Therefore, not all safety hazards are listed in the instruction manual from our website.
  • CAUTION

    • Do not use in locations near fire or in environments with high temperature and humidity.
    • Do not use this product where corrosive, flammable gas is present.
    • Do not use this product near equipment or wires that generates strong electrical or CAUTION magnetic fields (such as a solenoid).
    • Failure to follow this instruction could result in product malfunction from inductive noise.
    • Do not use this product near chemicals.
    • This product could melt or become deformed if exposed to chemicals.
    • Do not listen to the buzzer at close range.
    • Failure to observe this may lead from irritation to permanent damage to the ears.
    • For the purpose of safety, connect an external fuse to the power supply as shown in “6 Wiring Example”.
    • Do not bend the power supply wire or LAN cable unnecessarily.
    • Failure to follow this instruction could result in disconnection and malfunction or equipment damage.
    • When packing or unpacking equipment that the product is attached to, be careful not to snag the product.
    • Failure to follow this instruction may result in equipment damage.
  • NOTE

    • Before handling static-sensitive parts of this product, discharge any static electricity from the body.
      Note (To prevent damage from static electricity, place your hand or other body part onto a metal object or to an earth ground.)

    • Use a soft cloth moistened with water to wipe off any dirt or grime on the main unit. (Do not wipe with thinners, benzine, gasoline, or oil.)

    • Observe the following when handling product parts:

    • Other than parts that you can remove, do not disassemble any parts.

    • Do not modify this product.

    • Use only the replacement parts specified in the Instruction Manual.

About laws and regulations in each country

  • For Customers in U.S.A.
    • This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.
    • These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
    • The equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
    • Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. (Responsible party in U.S.A.) 20130 S. Westem Ave. Torrance, CA90501, U.S.A.
  • For Customers in Europe
    • This product has been tested and found to comply with the limits for a Class A device.
    • These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This product must not be used in residential areas.

Parts and Accessories

PATLITE-WE-LAN-Wall-Mount-Signal-Tower-4

Model Number Configuration

PATLITE-WE-LAN-Wall-Mount-Signal-Tower-5

Part Name and Outer Appearance

PATLITE-WE-LAN-Wall-Mount-Signal-Tower-6

How to Install

  • The following requirements are necessary for proper installation.
  • Install where excessive vibration is not present.
  • Install on a solid surface.
  • This product can only be mounted in up-right position.
  • Use this product indoors only. (Do not use outdoors.)
  • If the cover cracks or the plating peels off due to a strong impact such as dropping the product, the damaged part becomes sharp and very dangerous.
  • If the product becomes damaged, do not continue using it and immediately replace it.
  • During installation, do not remove the waterproof sheet.
  • Doing so will hinder waterproofing. (Protection Rating: IP23)
  • When increased waterproofing is required, seal the screw or flanged nut parts, as well as over the waterproof sheet around the mounting hole, with a waterproof sealant.
  • If increased waterproofing is required on an uneven mounting surface, in addition to the screw or flanged nut parts, seal the gap between the product and the mounting surface with a waterproof sealant.

PATLITE-WE-LAN-Wall-Mount-Signal-Tower-7

  1. In the mounting location, drill holes for mounting and wiring the product.
  2. Remove the cover from the main unit.
    • If it is difficult to remove the cover, wear work gloves before starting.
    • Do not apply excessive force to the cover or lens.
    • Failure to follow this instruction could result in equipment damage.
  3. Pass the LAN cable and power cable through the wire entry hole.
  4. Mount the main unit on the wall.
  5. Attach the cover to the main unit.
    • Attach the cover after hooking the recess of the cover over the protrusion on the main unit.

How to Remove the Cover After InstallationPATLITE-WE-LAN-Wall-Mount-
Signal-Tower-8

  1. Insert a flathead screwdriver into the “removal groove” of the buzzer aperture.
    • Recommended tip width of flathead screwdriver: 6 mm
  2. Tum the flathead screwdriver counterclockwise to release the claws.
    • The flathead screwdriver could damage the mounting surface or cover. Use with care.
  3. Lift the cover and remove.
    • Use a flathead screwdriver to remove the cover.
    • Forcibly removing the cover by hand may result in injury.

How to Wire

  • Turn OFF the power before wiring. A short circuit may damage internal circuits or cause an electric shock.
  • Pay close attention to the wiring to avoid mistakes, Incorrect wiring will burn out internal circuits,
  • As shown in the wiring example, insert a fuse on the power supply side for external protection. It will protect the power supply from burnout in case of a wiring error.
  • Confirm the network is indoors and the LAN cable is not routed outdoors. Failure to follow this instruction could result in equipment damage due to transient voltage from lightning.
  • The LAN cable should have an RJ-45 connector and be rated for Category 5e or higher (Category 6 or higher recommended). (You can use either a straight-through or crossover cable.)
  • When wiring, do not tug the power line, LAN cable, or RJ45 connector, nor stuff them into the main unit.

Wiring Example
Turn off the power to the product and wire as per the wiring example. If there are any questions concerning this product, refer to the contact information at the end of this document and contact your nearest PATLITE Sales Representative.PATLITE-WE-LAN-Wall-Mount-Signal-
Tower-9

Specifications

  • Model: WE-402UB-LAN
  • Rated voltage: DC 24V / 24V DC
  • Rated Power Consumption: Max.5.SW

How to use

Various functions of this product can bet set up using the Setup Browser.  For details on the setup method, refer to the Instruction Manual of this product, which can be downloaded from our website.

  • Network Settings

    • The default address for this product, as well as when initialized, is 192.168.10.1. Before setting up with the Web browser, change the computer network settings as follows:
    • Computer IP Address: 192.168.10.2- 254
    • Subnet Mask: 255.255.255.0
  • Settings During Initial Setup
    You will need to set a username and password during initial setup. Once a username and password is set, you can use it for future logins.

  • Updating Firmware
    Be sure to update this product to the latest version of the firmware before use. Updating improves product reliability and enables you to use any new features.

    • You can download the latest version of the firmware by registering as a member from our website.
    • Regularly log in to My Page to make sure that you have the latest version of the firmware.

www.patlite.com/
www.patlite.com/
www.patlite.eu/
www.patlite-ap.com/

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals