SAMSUNG A3LWID210S IoT Multi Transceiver Instructions

: June 10, 2024
: Samsung

Table of Contents

SAMSUNG A3LWID210S IoT Multi Transceiver
Product Usage Instructions
FAQ
Introduction
US/Canada
Antenna information
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SAMSUNG A3LWID210S IoT Multi Transceiver

SAMSUNG-A3LWID210S-IoT-Multi-Transceiver-PRODUCT

Specifications

Product Name: WID210S IoT Multi Transceiver
Manufacturer: SAMSUNG ELECTRONICS
Power Source: External 5VDC@500mA regulated power supply with 10pin zip type connector
Networking Technology: EFR32 IoT Multi Transceiver by Silicon Labs
Antenna Information: Patch antenna with 1.2dBi gain, Frequency range: 2405MHz ~2480MHz
ZigBee Module: KC CE FCC/IC
Target Power (dBm): 10.5, 7, 18
Tolerance (dB): +1, +1, +1
Max. Target Power (dBm): 11.5, 8, 19

Product Usage Instructions

Theory of Operation

The WID210S is an IoT Multi Transceiver designed for Home automation networks. It serves as a bridge between the TV-remote control device and the home automation system.

Powering the Device

The WID210S requires an external power supply of 5VDC@500mA with a 10-pin zip- type connector for operation.

Networking

The device utilizes the EFR32 IoT Multi Transceiver technology from Silicon Labs to transmit information between the remote control device and the main board via the 10pin zip type connector.

Antenna Information

This module is equipped with a Patch antenna with a gain of 1.2dBi and operates within the frequency range of 2405MHz to 2480MHz.

Compliance

The device complies with Part 15 of the FCC’s Rules and must not cause harmful interference. It is suitable for use in both fixed and mobile applications.

FAQ

Q: What type of power supply does the WID210S require?

A: The WID210S needs an external power supply of 5VDC@500mA with a 10pin zip type connector.

Q: What networking technology does the WID210S use?

A: The WID210S utilizes the EFR32 IoT Multi Transceiver technology from Silicon Labs.

Q: What is the frequency range of the antenna in this device?

A: The antenna operates within the frequency range of 2405MHz to 2480MHz.

Theory of Operation WID201S IoT Multi Transceiver
SAMSUNG ELECTRONICS 10/24/23

Introduction

The WID210S is a IoT Multi Transceiver for Home automation networks.
Connected to the TV remote control device, it acts as a pathway between remote home automation. Power is provided by External 5V power supply with 10pin zip type connector.

Networking
The WID210S is applied EFR32 IoT Multi Transceiver of Silicon Labs.
The IoT Multi transceiver delivers the information received from the remote control device to the main board with 10pin zip type connector.

Power Source
The WID210S is powered by an external 5VDC@500mA regulated power source with 10pin zip type connector.

Indication
None.

Expansion Ports
None.

Eurpoe

SAMSUNG-A3LWID210S-IoT-Multi-Transceiver-FIG-1

US/Canada

FCC approval
This device complies with Part 15 of the FCC`s Rules. Operation is subject to the following two Conditions:

This device may not cause harmful interference, and
This device must accept any interference received, including interference that may cause undesirable operation.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in aresidential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installedand used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment doescause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interferencby e by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/ TV technician for help.
The OEM integrator is responsible for ensuring the end user has no manual instruction to remove or install module.
The module is limited to installation in mobile or fixed applications.

IC approval
This device contains license-exempt transmitter(s )/receiver(s) that comply with Innovation, Science and Economic development Canada’s licenceexempt RSS(s). Operation is subject to the following two conditions:

This device may not cause interference.
This device must accept any interference, including interference that may cause undesired operation of the device.

IMPORTANT NOTE
This device complies with FCC & IC radiation exposure limits set forth for an uncontrolled environment. This device should be installed and must not be colocated or operating in conjunction with any other antenna or transmitter.
This device is intended only for OEM integrators under the following conditions:

This module may not be co-located with any other transmitters or antennas.
The antenna must be installed such that 20cm is maintained between the antenna and users. As long as 2 conditions above are met, further transmitter test will not be required. However, the OEM integrator is still responsible for testing their end product for any additional compliance requirements with this module installed.
In the event that these conditions cannot be met, then the FCC & IC authorizations are no longer considered valid and the FCC ID cannot be used on the final product. In these circumstances, the OEM integrator will be responsible for reevaluating the end product including this module and obtaining separate FCC & IC authorizations.

User Information
Caution: Any changed or modifications not expressly approved by the party responsible for compliance could void the user`s authority to operate this equipment.