Bekrvio KTWO Coat Rack Instruction Manual
- July 31, 2024
- BEKRVIO
Table of Contents
Bekrvio KTWO Coat Rack
Product Specifications
- Material: Metal and Plastic
- Dimensions: 50cm x 30cm x 20cm
- Weight: 5kg
- Color: Black
Product Usage Instructions
Assembly Instructions
- Step 1: Place components A, B, E, and G as shown. Ensure the correct angle and screw in clockwise.
- A x 3
- B x 3
- Step 2: Install components C, D, H, E, F, and G using the specified screws and quantities.
- C x 2 (10×60)
- D x 1 (10×120)
- H x 4 (6×40)
- E x 3 (10×30)
- G x 1 (8×25)
- F x 4 (8×25)
- Step 3: Secure the assembly with screws accordingly. Remember to tighten with a tool when necessary.
- Step 4: Connect components with 4cm screws, ensuring a 2cm gap for both upper and lower levers.
- Step 5: Finalize the assembly by following the connection instructions for component C.
Frequently Asked Questions
Q: What should I do if I encounter difficulties during assembly?
A: If you face challenges during assembly, refer back to the manual for detailed instructions. Make sure to double-check the component placement and screw sizes.
Q: Can I use additional tools for assembly?
A: Yes, you can use appropriate tools to facilitate the assembly process. Ensure not to overtighten screws to avoid damaging the components.
PARTS
ASSEMBLY INSTRUCTION
- STEP 1
- When installing here, first screw in by hand, and then tighten the screw with a tool when you cannot screw again.
- Connect with 4cm screws, leaving 2cm for the upper lever and 2cm for the lower lever
- STEP 2
- When installing here, pay attention to the Angle and screw in clockwise.
- STEP 3
- STEP 4
- STEP 5
Documents / Resources
|
Bekrvio KTWO Coat
Rack
[pdf] Instruction Manual
KTWO Coat Rack, KTWO, Coat Rack, Rack
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>