HAOZEE TH-16 Smart WiFi User Manual
- June 14, 2024
- HAOZEE
Table of Contents
HAOZEE TH-16 Smart WiFi
Product Information
Product: Wi-Fi Temperature & Humidity Sensor with Screen
Model: TH16
Specifications
- Real-time monitoring of temperature and humidity
- Screen display for easy reading
- Requires a 2.4GHz Wi-Fi network
- Compatible with Android 4.4+ and iOS 8.0+
- MAC-open Wi-Fi router required
Checklist Before Using the Device
- Ensure your smartphone is connected to a 2.4GHz Wi-Fi network
- Input the correct Wi-Fi password
- Your smartphone must be running Android 4.4+ or iOS 8.0+
- Ensure your Wi-Fi router is MAC-open
- If the number of devices connected to your Wi-Fi router reaches the limit, consider disabling a device or using another Wi-Fi router
Product Usage Instructions
Step 1: Download and Install the Smart Life App
Scan the QR code below or search for “Smart Life” app in the Google Play Store or App Store. Download and install the app.
[QR Code Image]
Step 2: Create an Account
Open the Smart Life app and create an account using your mobile number and authentication code.
Step 3: Connect the Sensor to Wi-Fi
Make sure your smartphone is connected to your Wi-Fi router. Use the supplied
Microcharging cable to supply power to the sensor.
Open the Smart Life app and follow one of the below methods:
Method 1: Bluetooth Enabled
- Turn on Bluetooth on your mobile device.
- The app will prompt you to turn on Bluetooth and select the device to add.
- Enter your Wi-Fi name and password. The sensor will connect to the Wi-Fi network automatically.
Method 2: Bluetooth Disabled
-
Select “Temperature and Humidity Sensor (Wi-Fi)” from the Sensors category in the app.
-
Enter your Wi-Fi password.
-
Make sure the LED indicator on the sensor is blinking rapidly.
If not, open the stand at the back of the sensor and hold the reset button for about 5 seconds until the LED indicator starts blinking rapidly. -
The sensor will connect to the Wi-Fi network.
FAQ
Q: What should I do if the LED indicator on the sensor is not blinking
rapidly?
A: If the LED indicator is not blinking rapidly, please open the stand at
the back of the sensor and hold the reset button for about 5 seconds until the
LED indicator starts blinking rapidly.
Q: Can I use this sensor with a 5GHz Wi-Fi network?
A: No, this sensor requires a 2.4GHz Wi-Fi network for connectivity.
Wi-Fi Temperature & Humidity Sensor with Screen
Thanks for choosing our product !
You can real-time monitor the temperature and humidity on the screen directly.
Please kindly read the user manual carefully before usage and keep it for
future reference.
Product Presentation
Specification
- Size: 656517mm
- Micro Input: DC 5V/1A
- LED Indicator: Blue
- Wi-Fi Protocol: 2.4GHz
- Wi-Fi Standard: IEEE 802.11 b/g/n
- Temperature Measure Range: 0-60°C
- Temperature Accuracy:±1 °C
- Humidity Measure Range:0% RH~99% RH
- Humidity Accuracy:±5% RH
Check list before using the device:
- a. Your smartphone has connected to a 2.4GHz Wi-Fi network
- b. You have input the correct Wi-Fi password.
- c. Your smartphone must be Android 4.4 + or iOS 8.0 +.
- d. Your Wi-Fi router is MAC-open
- e. If the numbers of devices connected to Wi-Fi router reach the limit, you can try to disable a device to cavate the channel or try with another Wi-Fi router.
How to set up
-
Use your smartphone to scan QR code, or search “Smart Life” app in Google
Play Store or APP Store to download and install. -
Create an account with your mobile number and authentication code.
-
Connect your mobile to your Wi-Fi router,supply power to the sensor with the supplied Microcharging cable, click “+” in the upper right corner of homepage or click “Add Device” .
-
Turn on the bluetooth in mobile:The app will advise you to turn on bluetooth in your mobile, then you choose the device to add. Enter into your Wi-Fi name and Wi-Fi password, it will connect the Wi-Fi network automatically.
-
Do not turn on the bluetooth:
Select ”Temperature and Humidity Sensor(Wi-Fi)” from “Sensors”, enter into the Wi-Fi password,make sure LED indicator is blinking rapidly, if not,please open the stand at the back, hold the reset button for about 5s till LED indicator blink rapidly.it will connect.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>