TOPDON BT Mobile Pros Bluetooth Battery Tester User Manual
- June 3, 2024
- TOPDON
Table of Contents
TOPDON BT Mobile Pros Bluetooth Battery Tester
ABOUT
Thank you for purchasing TOPDON BTMOBILE PROS Battery Tester. Designed to work
on 12V batteries within the 100-2000 CCA range, TOPDON BTMOBILE PROS meets a
variety of battery specifications including CCA, JIS, EN, DIN, SAE, IEC, etc,
and also an effective detector to pinpoint the bad cell.
It adopts the most advanced conductivity detection technology to effectively
help maximize the performance of your 12V vehicles, giving valuable, easy-to-
understand information about the vehicle battery health, alternator’s
charging, and starter’s cranking conditions.
The built-in ExtraSafe protections against short circuit, reverse polarity,
and over voltage allow the tester to safely connect to any battery.
SPECIFICATION
- Operating Voltage: 8V-16V
- Clamp Line Length: 556mm (21.89 inch)
- Operating Temperature: -10°C to 45°c(14°F to 113°F)
- Storage Temperature: -20°C to 75°C (-4°F to 167F)
- Operating Humidity: -10°C-50 C10%-60%RH (Non-condensing)
- Storage Humidity: -20°C-70°C,10%-80%RH (Non-condensing)
- Safety Protection: Reverse Polarity Protection
PRODUCT DESCRIPTION
Indicator Display
- Green: Successful Battery Connection
- Blue: Successful Bluetooth Connection
- Red: Error. Over temperature, or over voltage
TEST RESULTS REFERENCE
TEST RESULT: REFERENCE: INTERPRETATION:
- Good Battery SOH>=60%, SOC>=60% Good battery
- Bad Cell- Replace Bad battery. SOH 60%, SOC>=60% Need to replace
- Recharge-Retest SOH>=60%, SOC<60% Recharge battery, and retest
Battery Measuring Standard & Range
- CA 100-2000(A)
- CCA 100-2000(A)
- EN 100-2000(A)
- SAE 100-2000(A)
- DIN 100-1400(A)
- GB 30-200 (Ah)
- MCA 100-1400(A)
- IEC 100-2000(A)
- CCA 100-2000(A)
- JIS 26A17–245H52
GETTING STARTED
Step1
Please scan the OR code or visit our offical website: https://www.topdon.com/products/btmobile-pros to download and install the APP NOTE: Compatible with Android 4.4 smart devices, or newer
Step2
Connect the RED Alligator Battery Clamp to the (+) positive battery terminal,
and connect the BLACK Alligator Battery Clamp to the (-) negative battery
terminal. Make sure the battery terminals are clean and the clamps are
securely
Establish wireless communication between BTMOBILE PROSS with your smart
devices via Bluetooth 4.2. You can register with your valid email address, or
skip the login procedure. and NOTE: timau We strongly recommend the
registration for latest product news
Step4
Select the options with guidance to run the battery test, cranking test,
charging test, or battery system test, according to your actual needs.
NOTE: Please turn off al electrical equipment prior to the battery
FAQ
Q: Can BTMOBILE PROS test the battery installed in the vehicle?
A: Yes, it supports in-vehicle and out-of-vehicle testing.
Q :Is the test result accurate?
A: Yes. Our BTMOBILE PROS features advanced conductance detection giving
you accurate test results in seconds.
Q :What batteries can BTMOBILE PROS work on?
A : It works on 12V regular flooded, AGM Flat plate, AGM Spiral, GEL and
Deep Cycle batteries, with CCA between 100 to 2000.
Q :Is BTMOBILE PROS designed with any built-in protections?
A: Yes. It offers peace of mind with extra-safe Reverse Polarity and
Sparkproof protection, and easy operations even if you’re new to battery
testing.
Q. Can BTMOBILE PROS test 12V solar battery?
A: If your solar battery bank is made up of lead-acid cells, then yes.
Q: How dol confirm if my vehicle battery is bad or good?
A: The battery tester will display SOH (State of Health), SOC (State of
Charge), CCA (Cold Cranking Ampere), Voltage, Internal Resistance, and Rating,
with an intuitive test result of “GOOD” or “BAD” for your reference If the
internal resistance is too large, it indicates a broken battery.
Q: Can this battery tester estimate the remaining capacity of my battery?
A: Yes.The battery tester will display SOc (State of Charge) to express
as a percentage of your battery’s rated capacity, a measure of its condition
to assess the potential energy.
Note that a decent SOc (State of Charge) doesn’t mean the battery is in good
condition. You need to refer to your battery’s actual CCA Value and Internal
Resistance for further analysis
IMPORTANT SAFETY INSTRUCTION
FCC Warnings
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (0) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
All information in this manual is based on the latest information available at
the time of pubication and no warranty can De made ror its accuracy or
completeness. TOPDON reserves tnergnt to make cnanges at any tme wnout notce
For more iniormation, please go to www.topdon.com.
PACKAGE LIST
Websitewww.topdon.com
Hotline (+1)833-629-4832
Emailsupport@topdon.com