napcat C1 Indoor 4MP Security Camera User Guide

Quick Start Guide

www.napcat.net

Package Content

| |
---|---|---
Camera X1| Mounting Plate X1| Power Cable X1
| |
Power Adapter X1| Screw Pack x1| Screw Hole Positioning Card x1
| |
Quick Start Guide X1 | Surveillance Poster x1 | Reset Needle Pin x1

Appearance

1. White Light
   Smart motion-activated white light LED provides colorful images at night.

2. Microphone
   Built-in microphone. Note: Do not insert objects into the microphone hole.

3. LED Indicator

4. Lens

5. MicroSD Card Slot
   Insert a microSD card (not included) for recording. Max. 256GB is supported.

6. Speaker
   Note: Do not insert objects into the speaker hole.

Understanding LED indicator status lights and information:

The color of the LED indicates the device’s current status.

Reset Button

Use the reset needle pin to poke the reset button, and hold for 3 seconds to reset.

1. Mounting Plate
2. Reset Button
   Use the reset needle pin to poke the reset button, and hold for 3 seconds to reset.

Type-C Port

Connect the power cord.

1. Type-C Port
   Connect the power cord.

Insert a MicroSD Card

Your recording footage can be saved continuously into a MicroSD card (not included) and played in your Napcat Life app. The camera will overwrite the oldest files when the MicroSD card storage space is full. See the instructions below to insert a MicroSD card:

1. Tilt the camera lens up, then you will find the MicroSD card slot.
2. Holding the MicroSD card in the correct orientation, and then insert the MicroSD card into the slot carefully. Push the MicroSD card until you hear a clicking sound.

Set Up Your Camera

Follow the steps below to get started with your new camera.

Step 1. Download Napcat Life APP

Get the Napcat Life app from the APP Store or Google Play.

Or download the APP by scanning below QR code.

Recommended System Specifications

Wi-Fi 802.11 b/g/n
iOS version 11.0 or higher
Android version 6.0 or higher

Step 2. Login

Run the app, and login with your account ID. If you don’t have an account, please sign up firstly.

Step 3. Configure Camera

Login the app, tap ” + Add Device ” and scan the setup QR code on the device, and then follow app instructions to configure your camera and add it to your home network.

Step 4. Place Camera

Place your camera on a flat surface, or mount it on a wall or ceiling.

• Place on a flat surface

Keep the gap between objects and the side of the camera lens more than 10 inches (25cm) to avoid overexposure caused by IR light reflection.

1. Gap>10inches(25cm)

• Mount on ceiling

1. Screw hole positioning card.
2. Drill and install anchors. Anchors are not required if the wall is made of wood.
3. Place the mounting bracket.
4. Screw the mounting bracket into position.
5. Press the camera to the mounting bracket and rotate clockwise to the right position.

Note:

1. If you want to remove the camera from wall or ceiling, rotate the camera anticlockwise.
2. If your camera is ceiling mounted, its captured images will be turned upside-down. Please login Napcat Life app home page, and click “Mirror” to adjust the image.

Tips for Camera Placement

• Do not face the camera towards any strong light sources.
• Do not point the camera towards a glass window. Or, it may result in poor image performance because of the window glare by infrared LEDs, ambient lights or status lights.
• Do not place the camera in a shaded area and point it towards a well-lit area. Or, it may result in poor image performance. For better image quality, please make sure that the lighting condition for both the camera and the capture object is the same.
• For better image quality, it’s recommended to clean the lens with a soft cloth from time to time.
• Make sure the power ports are not exposed to water or moisture or blocked by dirt or other elements.

Troubleshooting

Camera Is Not Powered On

If your camera is not powered on, please try the following solutions:

• Plug the camera into another outlet.
• Use another 5V power adapter to supply the camera.

If these won’t work, please contact Napcat support: support@napcat.net

Wi-Fi connection failed during initial setup process

If the camera fails to connect to Wi-Fi, please try the following solutions:

• Please make sure the Wi-Fi band meets the network requirement of the camera.
• Please ensure you have entered the correct Wi-Fi password.
• Put your camera close to your router to ensure a strong Wi-Fi signal.
• Change the encryption method of the Wi-Fi network to WPA2-PSK/WPA-PSK (Safer encryption) on your router interface.
• Change your Wi-Fi SSID or password and make sure that SSID is within 31 characters and password is within 64 characters.
• Set your Wi-Fi password using only the characters or digits on the keyboard.

If these won’t work, please contact Napcat support: support@napcat.net

Notification of Compliance

Compliance Statement

This device complies with Part 15C of FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Simplified EU Declaration of Conformity

Napcat declares that this device is in compliance with the essential requirements and other relevant provision of Directive EN300328,EN301489-1,EN31489-17,EN IEC 62311,EN IEC 62368.

Declaration of Conformity

Napcat declares that this device is in compliance with the essential requirements and other relevant provision of the Radio Equipment Regulations 2017.

Correct Disposal of This Product

Please recycle this product responsibly to promote the sustainable reuse of material resources and avoid potential harm to the environment.

Correct Disposal of This Product

This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environment safe recycling.

References

• Napcat

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>