napcat B221 Wireless NVR System User Guide

napcat B221 Wireless NVR System

Specifications

• Model: ZLUHOHVV1956
• Dimensions: 4XLFN6WDUW*XLGH
• Features: KINTOIGR9[VVUXZ Y[VVUXZ&TGVIGZTKZ

Setting Up the Product
To set up the ZLUHOHVV1956 model, follow these steps:

1. Unbox the product carefully.
2. Connect all the necessary cables and power source.
3. Power on the device by pressing the designated button.

Operating the Product
To operate the product efficiently, remember the following:

• Refer to the user manual for detailed instructions on different functions.
• Use the control panel or remote control to navigate through settings.
• Adjust settings according to your preferences.

Maintenance and Care
To ensure the longevity and proper functioning of the product:

• Regularly clean the product with a soft, dry cloth.
• Avoid exposing the product to extreme temperatures or moisture.
• Keep the product away from direct sunlight and dust.

Frequently Asked Questions (FAQ)
Q: How do I troubleshoot if the product is not turning on?
A: Check if the power source is connected properly and try using a different outlet. If the issue persists, contact customer support.

What’s in the Box

Introduce the NVR

1. Network Status LED
2. Storage Status LED (
3. Power Status LED
4. HDMI Port
5. USB Port
6. MicroSD Card Slot
7. Ethernet Port
8. Reset Hole
9. USB Port
10. Power Port

Introduce the Camera

1. USB-C Charging Port
2. Pair/Power* Button
3. Micro SD Card Slot
4. Speaker
5. Microphone
6. Photosensitive Sensor
7. Camera Lens
8. Red and
9. Green Light
10. Spot Light
11. Infrared LED
12. Indicator Light
13. Solar Panel
14. Solar Panel Bracket PIR Sensor

*Power Button:

1. Press and hold for 3 seconds to turn on the game when it is off.
2. Press and hold for 8 seconds to turn off the camera when it is on.

Expanding Storage(Optional)

The NVR comes with a pre-installed 32GB/64GB(vary by different malels) SD card fo saving derecho dings and allows you to add an additional hard dr le top and the space whenever necessary.

Prepare Your
Hard Drive Your hard drive must meet the following requirements:

newer d drie must be formatted. You may need to transfer all the data from your hard drive to a secure location if necessary.

Install Your Hard Drive Drive.
NVR must be powered off when you install or remove a hard

1. Push down the bottom lid to move it.

2. Lase the crew, then pull out the hard drive bracket.

3. Fix your hard drive to the bracket with the provided screws.

4. Ins it and’s dew the bracket back to NVR then put the bottom lid back into lace.

Charging the Camera
We recommend fully charging the cameras before first use.

1. Connect the included power adapter to the NVR, and wait a few minutes for the system to start up.

2. Connect the NVR toy or rate r using the included Ether ne cable. Then, connect the USB mase to the USB  to d the NVR.

3. Connect the NVR to the monitor with a HDMI cable. (Optional, if you wish to monitor a screen)

4. To turn on the camera, press and hold the p over button located at the ton the camera for 3 seconds. It will automatically connect to the NVR via a wireless signal.

5. download and install the free “Nap cat Lié” ap  tom the App Store (iOS devices) or Con lo Dlav(Android doviroc)

Or download the APP by scanning below QR code.

6. Run the “Napcat Life” app, and sign up for a Napcat Life account. then log in with your account ID, tap “+ Add Device” and scan the setup QR code on the Device Bottom (remove the bottom lid). Or scan the setup QRcade in the NVR many and then follow the in-app instructions to add the NVR to this device list.

Mounting the Camera

1. Option 1: Mount the Camera with the Solar Panel Attached (Less Drilling)

If you mount a location without eaves and sunlight is not obstructed, install the dar directly on the top of the camera with the solar panel’s mounting bracket.

1. Install the solar panel onto the solar panel’s mounting bracket by tư ning it

2. Secure the power cable of the solar panel onto the bracket’s slot.

3. Drill holes with a 6.0 mm drill bit with the included positioning card, then insert the anchors into the holes.

4. Install the camera onto its mounting bracket by turning it clockwise until it clicks into ace. & napcak

5. Tighten the locking screw on the mount bracket, and then adjust to the angle you need.

6. Conne ct the USB-C connector to the USB-C port of the solar panel.

Option 2: Mount the Camera and the Solar Panel Separately (Best for Strong Solar Power)
If the camera is blocked, install the solar panel independently and use the provided USB-C extension cable to get strong solar power. The camera can be mounted on a wall or on the ceiling.

1. Dis as sembl the Sd ar Panel Mounting packet.

2.  Install the mounting bracket of the solar panel in a suitable position.

3. Install the solar panel onto its mounting bracket by turning it, then adjust the angle.

4. lIns the camera Dr il holes with a 6.0 mm drill bit with the included positioning card, then insert the anchors into the holes.

5.  Install the camera onto its mounting bracket by turning it clockwise until it clicks into place. & Snapchat

6.  Tighten the locking screw on the mount bracket, and then adjust to the angle you need.

7. Connect the solar panel to the camera using the provided USB-C extension cable.

Camera Holding Bracket

The camera holding bracket can be used for placement and adjustment of angles when a mounting bracket is not required in some scenarios.

Camera Holding Bracket

Pair your add-on camera or re-add the existing camera to your NVR:
Option 1: Using the “Napcat Life” app, from the Live view, tap the “..” button, and then tap “Pairing” to start the pairing process. You will have a 180-second timer to pair with your Camera.

Press the camera pair button three times within three seconds to start pairing with your NVR. A “Pairing Successful” message should appear on the screen. If you do not see this message, repeat the steps above.

Option 2:
You can also add the camera via the Monitor, tap the “pair” button on NVR Live View menu to start the pairing process.

Press the camera pair button three times within three seconds to start pairing with your NVR. A “Pairing Successful” message should appear on the screen. If you do not see this message, repeat the steps above

Troubleshooting

No video output on the monitor
if there’s no video output on the monitor from NVR, please try the following solutions:

• Monitor resolution should be at least 720P or above.
• Hold down the right mouse button for 10 seconds to restore the default resolution.
• Double-check the HDMI connection, or swap another cable or monitor to test.
• If it still doesn’t work, please contact Napcat Support:  [email protected]

Notification of Compliance
The terms HDMI and HDMI High-Definition Multimedia HIGH-DEFINITION MULTIMEDIA INTERFACE Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries.

FC Compliance Statement

This device contains licence-exempt transmitters)/receivers) that comply with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation
Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

IC Compliance Statement

The transmitter/receiver exempt from licensing contained in this device complies with Innovation, Science and Economic Development Canada’s (ISED) regulations applicable to license-exempt radio apparatus. Operation is subject to the following two conditions:

1. This device must not cause interference, and
2. this device must accept any interference, including interference that may cause undesired operation of the device.

IC Radiation Exposure Statement

This equipment complies with the radiation exposure limits set forth for uncontrolled environments in Canada. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Simplified EU Declaration of Conformity
Napcat declares that this device is in compliance with the essential requirements and other relevant provisions of Directive EN300328, EN301489-1, EN31489-17,EN IEC 62311, ENIEC 62368.

Correct Disposal of This Product
Please recycle this product responsibly to promote the sustainable reuse of material resources and avoid potential harm to the environment.

Correct Disposal of This Product
This marking indicates that this product should not be disposed of with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environment-safe recycling.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>