Shark GS300 Series Garment Stand Steamer User Manual

Shark GS300 Series Garment Stand Steamer User Manual

OWNER’S GUIDE
MODEL: GS300

IMPORTANT SAFETY INSTRUCTIONS

For Household Use Only

WHEN USING YOUR SHARK GARMENT STEAMER, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED, INCLUDING THE FOLLOWING:

READ ALL INSTRUCTIONS BEFORE USING YOUR GARMENT STEAMER.

DANGER OF SCALDING

Please use caution when using the garment steamer. The steam emitted from the openings is very hot.

POLARIZED PLUG:

To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the other). As a safety feature, this plug will fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature. Do not change the plug in any way.

1. USE THE SYSTEM ONLY FOR ITS INTENDED USE AS DESCRIBED IN THIS MANUAL.
2. ONLY USE WATER. To extend the life of your 3 in 1 Fabric Steamer, we recommend using distilled water especially if you live in an area with hard tap water.
3. DO NOT add cleaning solutions, scented perfumes, oils, or any other chemicals to the water used in this appliance as this may damage the unit or make it unsafe for use.
4. Use of any substances other than manufacturer’s recommended accessories will automatically void your warranty.
5. DO NOT use outdoors.
6. DO NOT leave the appliance unattended when plugged in.
7. Always unplug the power cord from the electrical outlet when not in use, when filling the water tank and before cleaning.
8. DO NOT allow to be used as a toy.
9. DO NOT put any objects into openings or operate with any opening blocked.
10. DO NOT use on leather, suede, vinyl, plastic or other delicate steam sensitive materials. Always determine the colorfastness of any fabric before using the fabric steamer by testing it on a small portion of the garment’s underside.

11. This appliance and the accessories become hot during use. Exercise care when changing accessories and follow removal and changing instructions as outlined in the manual. Do not change frames while the unit is turned on. Turn the unit off, wait for the unit to cool, and then change frames.
12. The garment steamer can be used in a vertical or horizontal motion. NEVER hold the steam head down while at rest or tilt it in a backward position as this may result in discharge.
13. When cleaning the garment steamer, unplug the power cord and clean with a dry or damp cloth. DO NOT pour water on the unit or use alcohol, benzene or paint thinner on the unit.
14. NEVER attempt to steam clothing while it is
being worn.
15. To protect against a risk of fire, electric shock,
or injury:
a. To avoid circuit overload, DO NOT operate another appliance on the same socket (circuit) as the fabric steamer.
b. DO NOT immerse any part of the system in water or other liquids.
c. DO NOT pull power cord to disconnect
from outlet; instead, grasp plug and pull to disconnect.
d. DO NOT use extension cords or outlets with inadequate current carrying capacity. If
an extension cord is absolutely necessary, use a 15-ampere cord. Cords rated for less amperage may overheat. Use care to arrange the cord so that it cannot be pulled or tripped over.
e. DO NOT operate the system with a damaged cord or plug, or if the appliance or any other part of the system has been dropped or damaged.
f. DO NOT disassemble or attempt to repair the fabric steamer. Return the system to EURO-PRO Operating LLC for examination and repair. Incorrect reassembly or repair can cause a risk of electrical shock or injury to persons when the fabric steamer is used.

g. DO NOT handle plug or fabric steamer with wet hands or operate without shoes.
h. DO NOT pull or carry by power cord, use power cord as a handle, close a door on the power cord, or pull the power cord around sharp corners or edges.

i. DO NOT allow power cord to touch hot surfaces.
j. ALWAYS disconnect system from electrical outlet when filling the water tank or emptying and when not in use.
k. NEVER aim or direct steam towards people, animals, or plants. The steam is very hot
and can cause burns. Burns can occur from touching hot metal parts, steam, steam bonnets or frames.
l. DO NOT operate the product while under the influence of drugs, alcohol or medications.
m. DO NOT operate in the presence of explosive and/or flammable fumes.
n. Store your appliance indoors in a cool, dry area out of the reach of children.
o. Keep your work area well lit.
p. Let the system cool completely before putting away.
q. Keep out of the reach of children.
r. Burns could occur from touching hot metal, hot water or steam. Use care when you turn a steam appliance upside down, there may be hot water in the reservoir.

Thank you for purchasing the Shark® 3in1 Fabric Steamer

TECHNICAL SPECIFICATIONS

Voltage: 120V., 60Hz.
Power: 1200 Watts
Water Capacity: 1150 ml (38.5 oz.)

ASSEMBLY

B. Steam hose/steam nozzle with steam bonnet and bristle brush  frame assembled. (bonnet  and frame are removable)| G. Garment Hook
C. Telescoping Garment Pole| H. Safety Nozzle Strap
D. Steam Nozzle Cradle with Garment Hook| I. Telescoping Garment Pole Adjustment  Clips
E. Unit Base| J. Steam Hose with fabric cover
| K. Hose Connection
| L. Carrying Handle
| M. Water Tank Cap
| N. Power Switch
| O. Base Release Button
| P. Wheels

1. Remove all packaging from the appliance. Do not plug in or turn on until assembly is complete.

2. Set the base on the floor. Insert the telescoping pole into the base.Turn the pole connector clockwiseto secure to the base. (fig. 1)

3. Attach the steam nozzle cradle to the top of the telescoping pole and secure by gently pressing down on the cradle to lock into place. The garment hook should be facing away from the front of the base. (fig. 2)

4. Attach the steam unit to the base. Pull the release button on the front of the base towards you. Secure the back of the steam unit into the base first, lining up the notch on the back of the steam unit into the groove on the base. Then lock the front of the steam unit into the base. (fig. 3)

5. Secure the steam hose to the steam unit. Align the hose with the notch on the steam unit and turn the connector clockwise to secure the hose to the steamer. (fig. 4)

6. Hang the steam nozzle on the steam nozzle cradle. Secure the steam nozzle in place by using the safety strap, loop the strap around the handle of the steam nozzle and secure in the groove on the opposite side.

7. Adjust the telescoping pole to the desired height by unlocking the three latches one by one. Unlock the latch and extend the pole to the appropriate height, then lock the latch back in place to secure at that height.

FILLING THE WATER TANK

1. Make sure the unit is unplugged before filling
2. Detach the steam hose from the steam main unit by turning the hose connector counterclockwise. This should be done only when the unit is cool. (fig. 5)

3. Remove the steam main unit from the base. Pull the release button on the front of the unit towards you and lift the front of the steam unit off the base to disconnect. (fig. 6)

4. Unscrew the water cap from the inlet, the cap is tethered to the water tank and can not be completely removed. (fig. 7)

5. Fill the water tank under the faucet to the max fill line.
6. Replace the cap on the filling inlet. Push the cap down and turn clockwise to lock.

7. Reattach the steam hose to the steam unit.

IMPORTANT: The water tank cap must be securely locked into place or steam will not emit.

4. Unscrew the water cap from the inlet, the cap is tethered to the water tank and can not be completely removed. (fig. 7)

5. Fill the water tank under the faucet to the max fill line.
6. Replace the cap on the filling inlet. Push the cap down and turn clockwise to lock.

7. Reattach the steam hose to the steam unit.

IMPORTANT: The water tank cap must be securely locked into place or steam will not emit.

8. If filling during use, unplug the unit from the power outlet and using a cup, fill the water tank to the max fill line.
WARNING: Do not fill the water tank when the unit is plugged in to an electrical outlet.
WARNING: The steam is hot! Be careful not to touch the steam nozzle when the unit is turned on or has been in use.

USING YOUR ACCESSORIES

STEAM BONNET

1. The steam bonnet protects your fabrics from water marks and filters impurities from the water. Attach the steam bonnet to the steam nozzle. Attach the left side of the bonnet over the nozzle and stretch the bonnet across the nozzle securing the right side of the bonnet. (fig. 8)

2. To remove the bonnet, pull the purple tab from the edge of the bonnet and pull off.

IMPORTANT: The bonnet should be in place at all times.

BRISTLE FRAME

1. The bristle brush frame provides deep steam penetration for heavy weight fabrics (denim, canvas, cotton, etc.). It should be attached over the steam bonnet.

2. The bristle frame should be attached over the steam bonnet. The bristles of the frame should be on top of the steam nozzle. Attach the two bottom tabs to the steam nozzle, then lock in place with the tab on the top of the frame. (fig. 9)

USING YOUR GARMENT STEAMER

STAND STEAMING

1. Plug the steamer into an electrical outlet and turn the On/Off Switch to the “I” position, a blue LED light will illuminate. It will take 1 minute for the unit to heat up. (fig. 10)

2. The steam will start emitting after 1 minute.
3. Hang your desired garment to the garment hook.
4. Unlatch the saftey strap from the steam nozzle on the cradle and begin steaming the garment in an up and down motion pressing the steam nozzle on the fabric. (fig. 11)

CAUTION: Steam hose can become hot during use. Never hold the hose while in use. When steaming garments, hold it always by the steam nozzle.

PORTABLE / TABLETOP STEAMING

1. Use the steamer in portable or tabletop mode to freshen fabrics all around your home.
WARNING: Do not use on leather, suede, or leather like materials.
2. Remove the steam unit from the base, by pulling the release button towards you (see assembly section for more detail p. 6 )
3. Plug the steamer into an electircal outlet and turn the unit on.
4. Hold the steam unit at waist level in one hand or place on a table. (fig. 12)
5. Begin steaming the fabric, upholstery or garment in an up and down motion pressing the steam nozzle on the fabric.

IMPORTANT: Make sure to hold the water tank level to the floor.
The steam hose should be fully extended for best steam results and to ensure no gurgling.

MAINTENANCE

CLEANING & STORING

1. Turn the steamer off “0” and unplug from the electrical outlet. Let the steamer cool for 30 minutes and empty the water from the water tank.
2. Hang the steam nozzle on the cradle and secure using the safety nozzle strap.
3. Collapse the telescoping pole for compact storage and loop the power cord through the safety nozzle strap.
4. Wipe the exterior of the steamer with a damp cloth and wipe dry if needed.
5. Store the steamer in a cool dry place.
6. “Periodically, remove the steam hose from the steam unit and turn the water tank upside down over the sink to empty any excess water. This will prolong the life of the garment steamer

TROUBLESHOOTING GUIDE & REPLACEMENT PARTS

2. The water tank might be empty, add water.
3. The water cap is not fully pushed in, press the cap down and turn clockwise to secure tightly.
4. The steam hose is not fully extended, use the steamer in an up and down motion making sure the hose isn’t too bent.
The nozzle leaves water drops on the garment.| 1. Make sure the steam bonnet is attached to the nozzle.
2. The steam bonnet could be too wet, remove the bonnet and let it dry before reusing.
3. The steam hose is bent, straighten the hose to eliminate condensation build up.
Unit wont turn on.| 1. Make sure the unit is plugged in and turned into the “I” position.

REPLACEMENT PARTS

A. 100SDL – Bristle Brush Frame
B. XPD300 – Steam Bonnet

WARRANTY & PRODUCT REGISTRATION

EURO-PRO ONE-YEAR (1) LIMITED WARRANTY

EURO-PRO Operating LLC warrants this product to be free from defects in material and workmanship for a period of one (1) year from the date of the original purchase, when utilized for normal household use, subject to the following conditions, exclusions and exceptions.
If your appliance fails to operate properly while in use under normal household conditions within the warranty period, return the complete appliance and accessories, freight prepaid to:

• U.S.: EURO-PRO Operating LLC
For customer service support call 1-800-798-7398 or visit www.sharkclean.com

• Canada: EURO-PRO Operating LLC
4400 Bois Franc, St. Laurent, Québec H4S 1A7

If the appliance is found to be defective in material or workmanship, EURO-PRO Operating LLC will repair or replace it free of charge. Proof of purchase date and $19.95 to cover the cost of return shipping and handling must be included.*

Non-durable parts including, without limitation, filters, brushes and electrical parts which normally require replacement are specifically excluded from warranty.

The liability of EURO-PRO Operating LLC is limited solely to the cost of the repair or replacement of the unit at our option. This warranty does not cover normal wear of parts and does not apply to any unit that has been tampered with or used for commercial purposes. This limited warranty does not cover damage caused by misuse, abuse, negligent handling or damage due to faulty packaging or mishandling in transit. This warranty does not cover damage or defects caused by or resulting from damages from shipping or repairs, service or alterations to the product or any of its parts, which have been performed by a repair person not authorized by EURO-PRO Operating LLC.

This warranty is extended to the original purchaser of the unit and excludes all other legal and/or conventional warranties. The responsibility of EURO-PRO Operating LLC if any, is limited to the specific obligations expressly assumed by it under the terms of the limited warranty. In no event is EURO-PRO Operating LLC liable for incidental or consequential damages of any nature whatsoever. Some states do not permit the exclusion or limitation of incidental or consequential damages, so the above may not apply to you.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state or province to province.

• IMPORTANT: Carefully pack item to avoid damage in shipping. Be sure to include proof of purchase date and to attach tag to item before packing with your name, complete address and phone number with a note giving purchase information, model number and what you believe is the problem with item. We recommend you insure the package (as damage in shipping is not covered by your warranty). Mark the outside of your package “ATTENTION CUSTOMER SERVICE”. We are constantly striving to improve our products, therefore the specifications contained herein are subject to change without notice.

PRODUCT REGISTRATION
Please visit www.sharkclean.com or call 1-800-798-7398 to register your new Shark® product within ten (10) days of purchase. You will be asked to provide the store name, date of purchase and model number along with your name and address.
The registration will enable us to contact you in the unlikely event of a product safety notification. By registering you acknowledge to have read and understood the instructions for use, and warnings set forth in the accompanying instructions.

FAQs

CAN I USE CLEANING PRODUCTS IN THIS APPLIANCE?

DO NOT add cleaning solutions, scented perfumes, oils, or any other chemicals to the water used in this appliance as this may damage the unit or make it unsafe for use.

WHAT SHOULD I NOT USE THIS APPLIANCE ON?

DO NOT use on leather, suede, vinyl, plastic or other delicate steam sensitive materials. Always determine the colorfastness of any fabric before using the fabric steamer by testing it on a small portion of the garment”s underside.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>