Shark AW201 HydroVac Cordless 3-in-1 Cleaner User Guide

Shark AW201 HydroVac Cordless 3-in-1 Cleaner

PRODUCT INFORMATION

The Cordless 3-in-1 Cleaner is a versatile cleaning product that can be used on hard floors, area rugs, and carpets. It comes with a handle and pole, main body, charging dock, Shark HydrovacTM Multi-Surface Concentrate, owner’s guide, and an additional brushroll.

Assembly

Align the pole with the opening in the main body and insert it firmly until it clicks into place.

Dock Charging

1. Before first use, charge Shark HydroVacTM for 4 hours.
2. To charge, place HydroVac on dock. Battery icon will illuminate when charging begins.
3. Battery icon will turn off when unit is fully charged.

Filling the Clean Solution Tank

1. Press the release button and lift off the tank.
2. Remove cap from tank and add water, up to WATER line.
3. Add cleaning concentrate*, up to HYDROVAC CONCENTRATE line.
4. Replace cap and reinsert tank until it clicks into place.

Using the Hydrovac

1. Press the Power button on the handle to turn on power.
2. Tilt the handle back to start cleaning in Hard Floor Mode, the optimal setting for cleaning bare floors.
3. To switch to the optimal setting for cleaning area rugs, press the Area Rug Mode button.

Activating Self-Clean Cycle

1. Make sure Clean Solution Tank is at least half full.
2. Make sure Dirty Water Tank is empty.
3. Place Shark HydroVacTM on charging dock.
4. Press Power button to start 2-minute self-clean cycle. The Self-Clean Mode icon will pulse.
5. DO NOT remove unit from dock during cycle. Icon will turn off when complete.

*Only use Shark HydroVacTM Multi-Surface Concentrate, Shark HydroVacTM Disinfectant, and water with this product.
For questions or to register your product, contact us at: 800-798-7398 or visit us online at sharkclean.com @sharkcleaning

WHAT’S INSIDE

• A Handle and Pole
• B Main Body
• C Charging Dock
• D Shark Hydrovac™ Multi-Surface Concentrate
• E Owner’s Guide
• F Additional Brushroll

ASSEMBLY

Align the pole with the opening in the Main Body and insert firmly until it clicks into place.

DOCK CHARGING

1. Before first use, charge Shark HydroVacTM for 4 hours.
2. To charge, place HydroVac on dock. Battery icon will illuminate when charging begins.
3. Battery icon will turn off when unit is fully charged.

FILLING THE CLEAN SOLUTION TANK

1. Press the release button and lift off the tank.
2. Remove cap from tank and add water, up to WATER line.
3. Add cleaning concentrate*, up to HYDROVAC CONCENTRATE line.
4. Replace cap and reinsert tank until it clicks into place.

Only use Shark HydroVac™ Multi-Surface Concentrate, Shark HydroVac™ Disinfectant, and water with this product.

USING THE HYDROVAC

1. Press the Power button on the handle to turn on power. Tilt the handle back to start cleaning in Hard Floor Mode, the optimal setting for cleaning bare floors.
2. To switch to the optimal setting for cleaning area rugs, press the Area Rug Mode button.

ACTIVATING SELF-CLEAN CYCLE

Recommended after every use.

1. Make sure Clean Solution Tank is at least half full.
2. Make sure Dirty Water Tank is empty.
3. Place Shark HydroVacTM on charging dock.
4. Press Power button to start 2-minute self-clean cycle. The Self-Clean Mode icon will pulse.
5.  DO NOT remove unit from dock during cycle. Icon will turn off when complete.

References

• Vacuum Cleaners, Steam Mops, Hair Care & Air Purifiers | Shark Home Cleaning

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>