Shark IX140 Series Pet Cordless Stick Vacuum User Manual

May 15, 2024
Shark

Shark IX140 Series Pet Cordless Stick Vacuum

Specifications:

  • Model: Shark IX140 Series Pet Cordless Stick Vacuum
  • Battery Type : Li-Ion
  • Power Settings : Standard, Bare Floor, Carpet, Boost Mode
  • Battery Run Time : Hand Vac – 40 minutes (Bare Floor), 25 minutes (Standard Mode), 25 minutes (Carpet Mode), 10 minutes (Boost Mode)

Product Usage Instructions

Assembly:

Refer to the enclosed Owner’s Guide for complete maintenance instructions. Visit sharkaccessories.com for additional parts and accessories.

Power Settings:

  • OFF: Slide the switch to the top to turn off the power.
  • BARE FLOOR SETTING: Brushroll spins slowly for bare floors and low-pile area rugs.
  • CARPET SETTING: Brushroll spins faster for carpets.
  • BOOST MODE: Pull the trigger for an added power boost.

Charging:

Remove the handheld vacuum from the wand by pressing the Wand Release button. Plug the charger into the charging port for a full charge.

Versatile Cleaning:

Slide the power button to the desired setting. Tilt the handheld vacuum back to engage the brush roll. Detach wand for above-floor cleaning or detach handheld vacuum for handheld use. Attach the cleaning accessory and select the power setting.

Emptying the Dust Cup:

  1. Disconnect the handheld vacuum from the wand.
  2. Position the dust cup over the trash bin and slide the CleanTouchTM Dirt Ejector Button forward to empty.

FAQ:

  • Q: How do I register my vacuum?
    • A : Visit registeryourshark.com to register your Shark IX140 Series Pet Cordless Stick Vacuum.
  • Q: What is the battery run time for each mode?
    • A : The battery run time is 40 minutes for Hand Vac (Bare Floor), 25 minutes for Standard Mode, 25 minutes for Carpet Mode, and 10 minutes for Boost Mode.

Please make sure to read the enclosed Shark® Owner’s Guide prior to using your vacuum.]

Use this Quick Start Guide to start using your new vacuum’s great features.

For questions, visit us online at sharkclean.com/support

Register your vacuum at registeryourshark.com

WHAT’S INSIDE

  • A. Handheld Vacuum
  • B. Motorized Floor Nozzle
  • C. Wand
  • D. Dusting Brush
  • E. 8″ Crevice Tool
  • F. Li-Ion Charger
  • G. Post Motor Filter (Pre-Installed)

ASSEMBLY

Shark-IX140-Series-Pet-Cordless-Stick-Vacuum-FIG1

  • For complete maintenance instructions, see the enclosed Owner’s Guide.
  • For additional parts and accessories, visit sharkaccessories.com.
  • For additional batteries and charging accessories, visit sharkclean.com/batteries.

POWER SETTINGS

OFF:

Slide the switch to the top to turn off the power.
To begin vacuuming in Standard Mode, slide switch to the appropriate setting.

BARE FLOOR SETTING

Bare Floor/Area Rugs

The brush roll spins slowly to clean bare floors and low-pile area rugs

CARPET SETTING

Carpet

The brush roll spins faster to pick up debris below the surface of your carpets.

BOOST MODE

For an added boost in power, pull the Trigger on the handheld vacuum. Release it to return to standard power.

NOTE : For deep cleaning per ASTM F 608 (embedded dirt in carpets) please select the Carpet setting and pull the trigger to go into Boost mode.
NOTE : Select Carpet setting for stuck-on dirt and debris.

LI-ION BATTERY

In Use

Shark-IX140-Series-Pet-Cordless-Stick-Vacuum-FIG6 Battery Indicator Lights

NOTE : The battery comes partially charged. Charge fully before first use.

CHARGING

To charge, remove the handheld vacuum from the wand by pressing the Wand Release button and pulling up Plug the charger into the charging port.

Shark-IX140-Series-Pet-Cordless-Stick-Vacuum-FIG7

Battery Run Time

Shark-IX140-Series-Pet-Cordless-Stick-Vacuum-FIG8

VERSATILE CLEANING

Shark-IX140-Series-Pet-Cordless-Stick-Vacuum-FIG9

Slide the power button to the desired setting. Step on the floor nozzle and tilt the handheld vacuum back.

NOTE : Brushroll will only engage when the handle is tilted back.

To detach the wand for above-floor cleaning, stand the vacuum upright, then press the Nozzle Release button on the bottom of the wand and pull the wand up to disconnect it.

OR

To detach the handheld vacuum, press the Wand Release button and lift the handheld vacuum off the wand.

THEN

Attach a cleaning accessory, then choose the power setting.

EMPTYING THE DUST CUP

  1. To empty the dust cup, first disconnect the handheld vacuum from the wand by pressing the Wand Release button and pulling up on the handheld vacuum.
  2. Position the dust cup over a trash bin and slide the CleanTouch ™ Dirt Ejector Button forward.

Shark-IX140-Series-Pet-Cordless-Stick-Vacuum-FIG12

©2019 SharkNinja Operating LLC. SHARK and ROCKET are registered trademarks of SharkNinja.

CLEAN TOUCH is a trademark of SharkNinja Operating LLC. CleanTouch

DOWNLOAD

Shark IX140 Series Pet Cordless Stick Vacuum:

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Shark User Manuals

Related Manuals