RED SHARK bikes Adventure Water Bike Instruction Manual

BIKE SURF
(Personal Water Craft)
UNBOXING & ASSEMBLY instructions

Adventure Water Bike

WARNING If you don’t understand something please contact to Red Shark bikes.
Before anything, read user’s manuals of this water bike to ensure correct usage through understanding. After reading, store them in a safe place for future reference. Incorrect handling of this product could possibly result in personal injury or physical damage. The manufacturer assumes no responsibility for any damage caused by mishandling that is beyond normal usage defined in these manuals of this water bike
IF YOU DO NOT AGREE FULLY TO ALL OF THESE PROVISIONS, YOU SHOULD NOT USE RED SHARK BIKES PRODUCTS.

ASSEMBLY INSTRUCTIONS

PARTS & elements
ENJOY model

PARTS & elements
FITNESS model

PARTS & elements
ADVENTURE model

ASSEMBLY INSTRUCTIONS

1. Please open the 2 boxes (from top side) and carefully remove all parts from the box.
2. Remove all plastic bags and protections carefully. WARNING: Plastic bags can be dangerous, to avoid danger of suffocation, keep all the bags away from all babies, children, and house pets. Do not use in cribs, beds, carriages or playpens. Tear up bag before throwing away.
3. Read the Packing List (outside the box) and check if there are all the elements

PARTS & elements
ENJOY model

PARTS & elements
FITNESS model

PARTS & elements
ADVENTURE model

ASSEMBLY INSTRUCTIONS

BOARD assembly

4.1. Extend the board

4.2. Use the AIR PUMP to have only a LITTLE PRESSURE to get the basic shape.

KEEP ATTENTION:
The A & B Holes surface: must be completely clean from dust, sand and other dirty elements. If not it could damage on the board skin.
If you find air leakage on the valve, use the black tool (included on the repair kit tools) to tight or to disassemble the valve and check if is dirty and you can clean it.

FRAME assembly

5.1 CHOSE the frame piece “A”:

Board with soft air pressure (From 0,01 to 0,5 psi)
KEEP ATTENTION:
The A & B Holes surface, must be completely clean from dust, sand and other dirty elements. If not it could generate damages on the board skin. Please clean always before.
AVOID THE INTERFERENCES from the rudder and propeller with the board surface (holes A and B) if not it could generate damages on the board.
Suggestion: You can use a cloth rag to cover the rudder.
5.1 INSERT the frame “A” in the front hole with a little air pressure in the board

HANDLEBAR assembly

6.1 Insert the handlebar in the STEM

RUDDER assembly

7.1 Insert the rudder BAR in to the frame

FRAME “B” assembly

8.1 CHOSE the frame piece “B”:

8.2 TRANSMISION assembly:

8.3 Transmission LEVEL assembly:

8.4 PLEAE CHECK the transmission DIRECTION assembly:

8.5 Transmission ALING:

8.6 Transmission screws TIGHTEN:

8.7 INSERT the frame in the REAR HOLE with a little air pressure in the board
KEEP ATTENTION: The A & B Holes surface, must be completely clean from dust, sand and other dirty elements. If not it could generate damages on the board skin.
Please clean always before.
AVOID THE INTERFERENCES from the rudder and propeller with the board surface (holes A and B) if not it could generate damages on the board.
Suggestion: You can use a cloth rag to cover the rudder.

FRAME “C” assembly

9.1 CHOSE the frame piece “C”:

9.2 INSERT the frame “C” in to the frame “A” & “B”.

9.3 TIGHT the screw through tre two frames with the clamp using the LONGER Allen key

FRAME assembly (front union)
IMPORTANT:
TIGHT with the FULL POWER
TIGHT the Bolt:
**** TORQUE SPECIFICATIONS
8,5 Newtons

FRAME & BOARD (position)

10.1 Confirm the frame position: Must be in a vertical position (90º towards the board)

10. FRAME & BOARD
10.1 PUFF UP the FINAL AIR PRESSURE

10.2 screw the cap onto the valve

SADDLE assembly

11.1 Untight the bolt, adjust the seat to your position and tight the bolt.

11.2 SADDLE position adjustment

PEDALS assembly

PROPELLER assembly

FIN assembly

14.1 Insert the fin in the board (bottom rear) slot until the end. Slide the fin onto the bottom side of the board until the end and cross the pin until you hear a click.

14.2 and cross the pin on the hole fin until you hear a click.

TRANSPORT & MANIPULATION

NOTE: TROLLEY is an extra equipment

15. TRANSPORT & MANIPULATION

15. TRANSPORT OPTIONS

BEFORE RIDING check

TO GET ON INSTRUCTIONS

HOW TO GET ON from water:

PRACTICE THIS ACTIONS until you really know, before start

TO GET ON INSTRUCTIONS
17. HOW TO GET ON from a wharf, boat or similar:

NOTES
FIRST TIME:
Do it on a calm water with no wind and with the comfort propeller. First moments are the most stressful ones, so you should ride smooth and constantly in a straight line. As soon as you feel stable please turn (left or right) very smoothly but with a constant pedalling.
You may have a feeling of having a very smooth roll, this is normal, but it is misleading, your will see, after 30 minutes of pedalling fairly at a medium rate, the strength on your legs.”
Using a Red Shark Bikes products on the water can be dangerous and involves certain risks which often cannot be predicted or avoided.
Those risks include, but are not limited to, personal injury or death, property damage, which may result from, loss of control, collisions with other users or watercraft, swimmers, and natural and man-made objects and/or animals/plants. By choosing to use a Red Shark Bikes product, you assume these risks and thereby need to know and practice water safety rules, responsible motoring, and proper use and maintenance of your Red Shark Bikes product(s) to reduce these risks. Since it is impossible to anticipate every situation or condition which can occur while some elements under in water, Red Shark Bikes can make no representation or warranty about the use and safety of Red Shark Bikes products under all conditions.
REGISTERING YOUR Personal Water Craft as a vessel:
Please the rules and in certain municipalities, states or countries, it is required that you register your water bikes, kayaks, SUPs, canoes, scooter surfs motorized, with your local licensing body. Please be sure to take the necessary steps to comply with local laws and regulations that apply to your water bike.

WARNINGS & PRECAUTIONS

IMPORTANT:
Always wear an approved Personal Flotation Device
NEVER use the Red Shark to go further than you can swim, on your own power
Like any other device, there is a chance of product failure, always ensure that such failure will not put you in danger
Never use under the influence of drugs narcotic substances or alcohol
Children and minors under 18 years old, must be used only under adult supervision.
NEVER use the Red Shark near fishing threads, branches, seaweed, plastics, loose clothing or OTHER objects from getting into the propeller.
Always rinse or run in clean fresh water after use
Do not use harsh chemicals to clean any Red Shark products
When cleaning the propeller area, make sure some one is not turning the pedals
Do not keep Red Shark products under direct sunlight or in a parked vehicle for extended period and always store from 10ºC to below 22°C
It is forbidden to use the water bicycle to people who can not swim.
Never wear clothing that may become entangled with any protruding element of the bicycle, if it overturns and stays stuck under the water, you can drown.
During the use, no one should touch, the propeller and the rudder (can cause injuries).
NEVER use the Red Shark if you may feel dizzy or lose consciousness.
Avoid large tides or boat trails hitting your bike since this could tip your water bike.
If you have no experience or you are not very skilled on swimming , never go alone and go to water areas that are not deeper than your neck.
Do not use the water bicycle in places with water currents, waves or offshore wind.
Check all the screws regularly before to depart.
Before leaving, always check that the weather forecast is appropriate for this activity.
Read the user manual in full.
IF YOU DO NOT AGREE FULLY TO ALL OF THESE PROVISIONS, YOU SHOULD NOT USE RED SHARK BIKES PRODUCTS.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>