VEVOR SL-06 Electric Slicer for Fruit and Vegetable Instruction Manual

: June 10, 2024
: VEVOR

Table of Contents

VEVOR SL-06 Electric Slicer for Fruit and Vegetable
Product Information
Product Usage Instructions
IMPORTANT SAFEGUARDS
Installation
Thickness adjustment
Spring assisted propulsion
Step to replace spring
Cleaning
The procedure of removing the cutter head
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

VEVOR SL-06 Electric Slicer for Fruit and Vegetable

Product Information

Specifications:

Model: SL-06/SL-08
Electric slicer for fruit and vegetable
Hand-integrated slicer
High efficiency
Light structure
Easy to disassemble and wash
Slice thickness adjustable
Applicable to shops, restaurants, stalls, milk tea shops, canteens, households, etc.
Green environmental protection

Product Usage Instructions

Installation Operation:

Take out the machine, install the handle on the cutter head with a screwdriver and fix the nut with an inner Hexagon wrench. Sheath the machine base with suction cups for smooth tables or use screws for non-smooth tables. Proceed with the slicing operation after installation.

Thickness Adjustment:

Utilize the spring-assisted propulsion feature for adjusting the thickness. The spring helps drive the material into the knife, saving time and effort while preventing cutting hands.

Spring Replacement

To replace the spring, first remove the cutter head and then the tie rod tail pentagram. Remove the push plate to access the spring. Replace the spring, install the return groove on the push rod, fix it in place with the pentagram, and reinstall the cutter head. Lock the cutter head with the safety buckle for normal use.

FAQ

Q: Can this slicer be used for both fruits and vegetables?
- A: Yes, this electric slicer is designed for slicing both fruits and vegetables efficiently.
Q: Is this slicer safe to use indoors?
- A: Yes, this slicer is recommended for indoor use only to ensure safety.
Q: How do I adjust the slice thickness?
- A: The slice thickness can be adjusted using the spring-assisted propulsion feature for easy customization.

We continue to be committed to providing you tools with at a competitive price. “Save Half”, “Half Price” or any other similar expressions used by us only represent an estimate of savings you might benefit from buying certain tools with us compared to major top brands and do not necessarily mean covering all categories of tools offered by us. You are kindly reminded to verify carefully when you are placing an order with us if you are actually saving half in comparison with the top major brands.

This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject to the product you received. Please forgive us that we won’t inform you again about any technology or software updates on our product.

$VEVOR-SL-06-Electric-Slicer-for-Fruit-and-Vegetable-fig $1$$

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should be followed, including the following.

READ ALL INSTRUCTIONS.
Unplug from the outlet when not in use, before putting on or taking off parts, and before cleaning.
Please check that the specified supply voltage in the product is consistent with the supply voltage(AC only).
This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a safe way and understand the hazards involved.
Children shall not play with the appliance. Cleaning and user maintenance shall not be done by children without supervision.
To protect against electrical hazards, do not put the Electric slicer for fruit and vegetables in water or other liquids
Avoid contact with moving parts.
Do not operate the Electric slicer for fruit and vegetables or any other electrical equipment with a damaged cord or plug or after the unit malfunctions or is dropped or damaged in any manner. Return it to the nearest authorized service facility for examination, repair, or adjustment.
Do not use outdoors. FOR HOUSEHOLD USE ONLY
Do not let the cord hang over the edge of the table or counter or touch hot surfaces.
Put this instruction manual in a safe place. Do not discard.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons in order to avoid a hazard.
Electric Shock Danger! Non-professional personnel are forbidden to repair the products; otherwise, it may result in electrical shock. When failures happen, they should be repaired by qualified maintenance personnel.
WARNING! It is strictly prohibited to put the main body of the machine and the power cord into any liquid. The machine must be fully cool before cleaning.
Do not place the product directly on the fire or near the source of fire. Otherwise, the product will be damaged or even result in danger. Once part of the product is on fire, do not directly use water to extinguish the fire. Use a wet cloth to cover the fire site.
When the plug is plugged into the socket, it must be plugged into the end. Otherwise, it will cause the components to overheat and burn due to poor contact.
Do not leave the product to work with no one watching. If the machine is overheating, please stop working immediately and unplug the power.

is overheating, please stop working immediately and unplugthepower.

SAVE THESE INSTRUCTIONS

CORRECT DISPOSAL

This product is subject to the provision of European Directive 2012/19/EU. The symbol showing a wheelie bin crossed through indicates that the product requires separate refuse collection in the European Union. This applies to

the product and all accessories marked with this symbol. Products marked as such may not be discarded with normal domestic waste but must be taken to a collection point for recycling electrical and electronic devices.

FCC Information

CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment!
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

This product may cause harmful interference.
This product must accept any interference received, including interference that may cause undesired operation.

WARNING : Changes or modifications to this product not expressly approved by the party. Responsibility for compliance could void the user’s authority to operate the product. Note: This product has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This product generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this product does cause harmful interference to radio or television reception, which can be determined by turning the product off and on, the user is encouraged to try to correct the interference by one or more of the following measures.

Reorient or relocate the receiving antenna.
Increase the distance between the product and the receiver.
Connect the product to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for assistance.

Summarize

This product has a hand-integrated slicer, high efficiency, light structure, and easy to disassemble and wash. Applicable to various places such as shops, restaurants, stalls, milk tea shops, canteen, households and other fruit and vegetable slice processing. Slice thickness adjustable. The cut pieces are even and easy to see. Green environmental protection, maintaining the original flavor, is welcomed by users.

$VEVOR-SL-06-Electric-Slicer-for-Fruit-and-Vegetable-fig $3$$

$VEVOR-SL-06-Electric-Slicer-for-Fruit-and-Vegetable-fig $4$$

Easily handle all
knife needs in all

$VEVOR-SL-06-Electric-Slicer-for-Fruit-and-Vegetable-fig $5$$

Installation

Installation operation of the machine

Take out the machine, install the handle on the cutter head with a screwdriver and fix the nut with an inner Hexagon wrench. Then the machine base is sheathed with a suction cup (stainless steel, Marble, and other smooth table can be directly with 6 small suction cups; wood and other non-smooth table can be randomly equipped with screws fixed. The slicing operation can be carried out after installation.

$VEVOR-SL-06-Electric-Slicer-for-Fruit-and-Vegetable-fig $6$$

Easy Slice in three steps

Simple operation, everyone can use

$VEVOR-SL-06-Electric-Slicer-for-Fruit-and-Vegetable-fig $7$$

$VEVOR-SL-06-Electric-Slicer-for-Fruit-and-Vegetable-fig $8$$

Thickness adjustment

Put the food into the groove and try to cut it to see the thickness. If it is not suitable, you can adjust the thickness. (1): Pull the outer ring of the adjusting knob out, (2) gently turn the knob to turn left and right, Inthecounter-clockwise direction to adjust the thickness; to the clockwise direction to adjust the thickness, the knob card back to the card slot; the thickness will not run. Pay attention to the feeling in your hand. If there is any resistance to rotation, it means that it has been rotated to the end. You’ll wear out the adjusting thread.)

Spring assisted propulsion

The spring drives the material into the knife, saving time and effort to prevent cutting hands

$VEVOR-SL-06-Electric-Slicer-for-Fruit-and-Vegetable-fig $9$$

$VEVOR-SL-06-Electric-Slicer-for-Fruit-and-Vegetable-fig $10$$

Step to replace spring

First, you need to remove the cutter head and then removethetierodtailpentagram; the push plate can be removed to replace thespring. Replace the spring, install the return groove on the push rod, fix it in place with the pentagram, and install the cutter head. Lock the cutter headwiththesafetybuckle for normal use.

$VEVOR-SL-06-Electric-Slicer-for-Fruit-and-Vegetable-fig $11$$

Cleaning

After slicing, the machine should be cleaned, the whole machine should be cleaned, or the cutter head should be cleaned. After cleaning, it is recommended to dry the water stains to keep the fuselagecleanandprevent rusting. (Note: Do not use the dishwasher to clean cutter headandfuselage)

The procedure of removing the cutter head

Pull the buckle out and take off the safety buckle.
The cutter head can be washed, or the blade can be replaced by drawing out the cutter head.

$VEVOR-SL-06-Electric-Slicer-for-Fruit-and-Vegetable-fig $12$$

Note: If there is any technical change, please refer to thenameplateontheproduct without further notice.

Manufacturer : Shanghaimuxinmuyeyouxiangongsi
Address : Baoshanqu Shuangchenglu 803long 11hao 1602A-1609shi Shanghai
Imported to AUS : SIHAO PTY LTD. 1 ROKEVA STREETEASTWOOD NSW 2122 Australia
Imported to the USA : Sanven Technology Ltd. Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730

NEED HELP? CONTACT US!

Have product questions? Need technical support?

Please contact us:

Technical Support and E-Warranty Certificate www.vevor.com/support

This is the original instruction, please read all manual instructions carefully before operating. VEVOR reserves a clear interpretation of our user manual. The appearance of the product shall be subject totheproduct you received. Please forgive us that we won’t inform you again about any technology or software updates on our product.

Please do not share copies of this digital book without prior permission from the author.

admin@piratemidi.com

New copies can be purchased at www.tonesandtechnology.com

SHUNSHUN GmbH