AIGOSTAR TK08-200W Outdoor LED Solar Light Instruction Manual

AIGOSTAR TK08-200W Outdoor LED Solar Light

Product Information

• ON: Turns the product on.
• OFF: Turns the product off.
• +M: Increases the product’s settings or values.
• -M: Decreases the product’s settings or values.
• AUTO: Activates the automatic mode of the product.
• WAKE UP: Sets the product to wake up mode.
• 3H: Sets a timer for 3 hours.
• 5H: Sets a timer for 5 hours.
• 8H: Sets a timer for 8 hours.

Product Usage Instructions

1. To turn the product on, press the ON button.
2. To turn the product off, press the OFF button.
3. To increase the product’s settings or values, press the +M button.
4. To decrease the product’s settings or values, press the -M button.
5. To activate the automatic mode, press the AUTO button.
6. To set the product to wake up mode, press the WAKE UP button.
7. To set a timer for 3 hours, press the 3H button.
8. To set a timer for 5 hours, press the 5H button.
9. To set a timer for 8 hours, press the 8H button.

OVERVIEW

SPECIFICATION

200W:

• Charging time with solar irradiation is 4-6 hours, but there are many factors due to the processes of usage and region with customers.
• Discharge time:10-12 hours
• Timing function: 3H, 5H, 8H
• Another mode is brightness adjustment mode, which is indicated on remote control.
• Best effect, recommended use of “AUTO” automatic mode.
• Usually power on (installed) is defaulted to automatic mode.
• Automatic mode: The brightness of the whole lamp can be adaptively controlled according to the battery’s own power.

IMPORTANT SAFETY INFORMATION

1. Do not dispose of battery in fire. This may result in an explosion.
2. Do not expose the light to fire or intense heat as the battery may explode.
3. Do not immerse in water.
4. Never look directly into the light or shine it into another person’s eyes.
5. Follow proper safety tips to prevent from falling off a ladder.
6. Consult your local construction safety guide if needed for installing the light fixture on a building.

FIXING INSTRUCTIONS

1. The light fixture should be installed on a flat and stable surface.
2. The solar charger board should be set in a sunny area where maximum sunlight can be collected. Typically, the solar board should face a direction (south) where sunlight can charge the board for at least 3 hours per day (5 hours per day if behind glass). It is suggested to charge the light for 24 hours before first use.
3. Use a soft wet cloth to periodically (at least once a year) clean the charger board to avoid the reduction of power output due to accumulated dust.

INSTALLATION

REMOTE CONTROL INTRODUCTION

QUICK SETUP PROCEDURE

1. PLEASE KEEP IT AWAY FROM THE CHILDREN.
2. THIS PRODUCT CAN BE INSTALLED FOR OUTDOOR, BUT WE SUGGEST THAT AGAINST FOR THE RAIN/STORM & HIGH LIGHTS.
   NOTE : PLEASE BRING THE FOLLOWING TOOLS

This product should be disposed of responsible at the end of its life. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice (Waste Electrical and Electronic Equipment Directive)

ITALIA MARKET SRL
VIA DELLE INDUSTRIE, 9/1 20883 MEZZAGO(MB), ITALIA P.IVA: IT10502730962
http://WWW.AIGOSTAR.COM
MADE IN CHINA

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>