TOPRIG S40 Video Slider User Manual

S40
VIDEO SLIDER

User Manual
V2.0

General Information

1.1In the Box

Slider × 1
Hexagon Wrench × 1
Replacement Belt × 1

1.2 Overview

(1) Speed Control
(2) Power On/Off
(3) AB Setting| (4) Loop Mode
(5) Start/Stop
(6) Power Indicator
---|---

(7) Panoramic Setting Knob
(8) Spirit Level
(9) Slider Platform| (10) DC
(11) 5V Output
(12) Shutter Release Port
---|---

1.3 Key Features

• Brushless Motor
• Stable
• Adjustable Speed
• Dual-axis camera Motions
• APP Control
• AB Point Setting
• Time-Lapse
• Silent

1.4 How to Install

Step 1 Install battery (not included)
Battery compatibility: NP-F550/NP-F750/NP-F950

Step 2 Install the tripod ball head (not include) onto the slider

Step 3 Install the camera

Step 4 Connect the shutter extension cable (not inclued)

Functions

2.1 Power On/Off

Power On: Press the power button
Power Off: Press and hold the power button for 2 seconds

2.2 Calibration
Please calibrate the slider before use.

How to calibrate:
Press the Start/Stop button after powering on and the slider will autornatically complete the calibration.

2.3 AB Point Setting

1. Default AB Point
   The default AB point of the slider upon powering on is shown below.

2. Customize AB Point
   (1) Move the slider to the 1st position
   (2) Press the AB point setting button to set point A (indicator light A on)
   (3) Move the slider to the 2nd position
   (4) Press the AB point setting button to set point B (irdicator ight & on)
   (5) Setting complete

3. Cancel AB point setting
   After the AB point setting is completed, press the AB point setting button again to cancel the AB point. The indicator lights A and B will both be tumed off.

2.4 Loop Mode
Slider S40 supports Single-loop mode and Infirite-loop mode, with single-loop mode being the defauit mode.

Setting: Press the loop mode button to switch between the two modes.

2.5 Speed Control

Speed control range: 0.1-5.0cm/s
Control the spesd of the sider by rotating the spesd control knob.

2.6 Stationary Object Tracking & Panoramic Mode Setting
2.6.1 Pan Shooting Mode: Adjust the knob to the center as shown below.

2.6.2 Focus Shooting Mode: Adjust the knob to the & upper left and lower right as shown below.

2.6.3 Panoramic Shooting Mode: Adjust the knob to the lower left and upper right as shown below.

App

ToRing App Features

• Calibration
• AB Point Setting
• Video Shooting
• Time-Lapse
• Loop Mode
• Firmware Update

3.1 App Download
Please download the App- TopRig from Google Play Store or i0S Apple Store.

3.2 App Connect
TopRig App connects to Slider S40 via Blustooth. To use the TopRig App, please enable Bluetooth on your mobile device.

3.3 Calibration

3.4 AB Point Setting

Set Point A
Tap the arrow button to move the slider to the 1st position Tap [A]

Set Point B
Tap the arrow button to move the slider to the 2nd position Tap [B]

Cancel AB Point
Tap [Delete]

3.5 Loop Mode
Switch the loop modes by tapping the loop button.

3.6 Video Shooting
Note: A camera control cable is needed for this function

Step 1
Once all parameters are set, tap [Shoot]

Step 2
Tap fStart) to start video shooting

3.7 Time-Lapse

Note Acamera shutter cable is needed for time-lapse.
Users can customize the AB point setting based on different shooting needs.

3.7.1 Parameter Setting
Total Time Defines how ong the Shoot lasts. (User setting required)
Interval Time Defines how long it lasts betwsen each photo shot. Inferval time must be longer than exposure time. (User sattirg required)

Exposure Time: Defines how long the slider remain stationary. Must be longer than the camera’s exposure time. (User setting required)
Frame Rate: Defines the frame rate of the firel video. (User ssttirg required)
Number of Shots: The total number of photo shots for refererce.
Video Length: The final length of the video for refererce.

3.7.2 Start/Stop Time-lapse

Start
After the parameter setting, tap [Start]

Stop

3.8 Firmware Update

Step 1

Tap

Step 2
Select [Firmware Update]

Step 3
Tap Mext)

Specs

Stationary Object Tracking
Panorarric Angle| 55°
Max.Travel Distance| 225mm
Power Supply| DC 9-16.8V NP – F Battery
Power Consumption| 0.5W
Dimensions| 410 x 106 x 71.3mm
Weight| 1.4Kg

Warranty

Warranty Period

1. If there is a quality problem that occurs within 15 days after receiving the product, TopRig will provide complimentary maintenance or replacement.
2. Under proper use and maintenance, from the date of receipt, TopRig will provide a one-year warranty on the wireless video transmission system and a three-month warranty on the accessories and cables. Free maintenance service is available during the warranty period.
3. Please keep the proof of purchase and the user manual in a safe place.

Warranty Exclusions

1. Out of warranty (If the proof of purchase is not available, the warrenty will be calculated from the date the product is delivered from the factory)
2. Damage caused by use or maintenance is not following the requirements of the product manual.
3. Unauthorized repair, modifcation or disassembly.
4. Damage caused by force majeure such as fre, flood, lightning strike, etc.

Warranty Process
Add: Room 302, BLDG D, Zhiyuanyungu, 73 Guanlan Blvd, Longhua
District, Shenzhen 518110
Tel: 0086-28-84334099

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>