denver PFF-1514W Photo Frame User Manual
- June 8, 2024
- Denver
Table of Contents
- Important safety information
- Getting started
- Frameo app
- Frameo quick setup
- Start using Frameo
- Navigating your Frameo
- Settings
- My frame
- Manage photos
- My Friends
- Display
- Slideshow
- Wi-Fi
- Notifications
- Backup and Restore
- Help
- About
- Warranty, Compliance, Support and Safety information
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
**denver PFF-1514W Photo Frame User Manual
**
Important safety information
WARNING: Please read the safety instructions carefully before using the product for the first time and keep the instructions for future reference. Read all the safety information below before using this Frameo product.
-
This product is not a toy. Keep it out of reach of children. If operated by children, please always make adult supervision.
-
Please keep the product away from pets.
-
Warning this Frameo product is with lithium battery inside, so pls follow below:
CAUTION
Do not try to open the Frameo product! The device may contain parts with deadly voltage.
Do not expose to heat, water, moisture, direct sunlight!
Only charge with the original adapter supplied with this product!
Do not attempt to replace the inside battery yourself- you may damage the battery, which could cause overheating and injury. The lithium battery in the product should be replaced only by skilled engineer and must be recycled or disposed of separately from household waste. Do not incinerate the battery.
Repairs or service should only be performed by qualified personnel. -
To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus shall not be exposed to dripping or splashing and that objects filled with liquids, such as vases, shall not be placed on apparatus.
-
The direct plug-in adapter is used as disconnect device, the disconnect device shall
remain readily operable. So make sure there is space around the power outlet for easy access. -
Product operating and storage temperature is from -10 degree Celsius to 40 degree Celsius. Under and over this temperature might affect the function.
-
POWER
After connecting power adapter, please press and hold power button for approximately 5 seconds (until screen turns on).
When it is on, press and hold power button for approximately 3 seconds to access
reboot or power off menu. Short press on power button will turn off/onscreen (but
leave the photo frame in on position). -
USB
Connect a USB flash drive. USB is for service use only. -
RESET
Use a needle or paper clip to reset unit. -
MicroSD card
Load external max 32GB microSD memory card here. -
DC
Connect DC adapter to power on the device.
Getting started
Congratulations with your brand new Frameo photo frame!
If you are new to using Frameo then start by following the Frameo quick setup
or follow the onscreen guide when powering it on for the first time.
Once you have set up your Frameo frame, you can start connecting it to your
friends and family.
Frameo app
To send photos to your frame, use the Frameo app for iOS or Android
Find the Frameo app by scanning this code:
For Android:
Search for “Frameo” on Google Play.
For iOS:
Search for “Frameo” on App Store.
Frameo quick setup
When starting your frame for the first time, you will need to setup the frame.
- Select a language. This will be the language used on the Frameo.
- Connect your frame to the internet by connecting it to a Wi-Fi.
- Frameo may ask you to update to the latest version. It is recommended to update your frame before continuing if asked to.
- Enter your name, and the location where you have placed your frame e.g. “John Doe” and “Living room”, “Kitchen” or “Office”. Finally set the timezone if not already correct.
Start using Frameo
Next step is to connect Frameo with your friends and family by providing them
with a code from your frame.
If you want to be able to send photos to the frame yourself, start by
downloading the app for iOS or Android on App Store or Google Play.
Then use the code to connect your frame and app as described below.
Connecting a new friend
Make sure that your friend has downloaded and installed the Frameo app.
Click the add friend icon on your frame . A dialog will appear showing a
connection code, which is valid for 12 hours.
Now share this code in whatever fashion you prefer e.g. SMS, E-Mail, IM, phone
call, to your friend.
Once your friends have added the code in their Frameo app, they will
automatically appear on your frame and be able to send you photos.
Read chapter Change options for a friend to allow connected friends, to
retrieve and share the connection code via the smartphone app
Navigating your Frameo
Swipe left or right to go through your photos. To access the menu, simply tap
once on the screen.
In the menu you will find the most used features.
Add friend
This will generate a code that you can share with your friends and family so
they can connect and send photos to your frame.
Settings
Opens the Settings.
Power menu
Opens the Power menu
Hide photo
Hides the current photo. This means that the photo will no longer be shown in
the slideshow. If needed the photo can be shown again through the settings
menu.
Gallery
Opens a gallery which allows for easy and fast navigation through your photos.
Fit to frame/Fill frame
This toggles how the photo is shown.
The Fill frame option is the default. The photo is scaled so that it fills the
whole screen. It will be centered around what is selected as the most
important part. See the first picture below.
Fit to frame will make sure that the entire photo is shown on the screen. See
the second picture below.}
Adjust photo
Allows you to adjust the position of the photo in the frame for an even better
fit. Here you can also use to rotate **your photo.
Interacting with videos**
When a video is shown two additional controls are shown. One for play/pause of
the video and one to control the volume level for video sounds.
Press to start the video playback. Pressing will pause the video playback.
Press to open the volume slider. Use the slider to adjust the volume level for
video sounds.
Pressing will mute the video while pressing will unmute the video.
Power menu
Tap the power icon to access the power menu. Here you can power off using ,
restart
your frame using or enter sleep mode using .
NB. Make sure to always use the power off button on the device or in the power menu to turn Frameo off. Never disconnect power when Frameo is running.
Settings
Through the settings, you can personalize your frame to your needs.
My frame
Frame name
Changes the name of your frame. This is also the name that connected friends
and family will see in their list of connected frames in the smartphone app.
Frame location
Changes the location of your frame. This is the location displayed on your
friends’ and family’s list of connected frames which can help to distinguish
frames from each other.
Set language
Sets the language used on the frame.
Set time zone
Sets the time zone used on the frame.
Enable/Disable 24-hour format
Enables, and disables, 24-hour time format.
Manage photos
In the manage photos menu you can see how many photos are on your frame and
the storage
they use. You can also see the amount of storage left available on your device
for storing new photos.
Show/hide photos
Select which photos to hide by tapping them. Hidden photos will NOT be deleted
from your frame and you can always select them to be shown again.
Use to hide or show all photos.
Delete photos
Select photos that you want to permanently delete from your frame by tapping
the photo.
Use to select or deselect all and to permanently delete the selected photos.
Import photos
Allows you to import photos from an external storage (e.g. microSD card).
Before you try to import photos, make sure you have an external storage (e.g.
microSD card) inserted into your frame with the photos you wish to import.
Start by selecting the photos that you want to import onto your frame. Once
selected tap the import button to start the import process.
Use to select or deselect all photos on the external storage (e.g. microSD
card).
Use to set the sort order of photos before import and to order by
ascending/descending.
It is currently not possible to add a caption or define the most important
part of the photo when using the import function. An alternative for this is
to add yourself to your friend list and send the photos using the app.
Export photos
Allows you to export photos from the frame to external storage (e.g. microSD
card). The export function will export all photos on the frame as well as
profile pictures.
My Friends
This list contains all the connected friends that are allowed to send photos to your frame.
Change options for a friend
Click the options icon to open the friend options menu. From here you can
allow / disallow if a friend may share the code to the frame. If this is
enabled the friend can retrieve and share the code to the frame from his/her
app.
From the options menu you can also delete a friend, by pressing the DELETE
FRIEND button. This will remove the friend from the list and thereby remove
their permission to send photos to the frame. You will then be asked to
confirm the removal and if you would like to remove all photos previously
received from this friend.
Add person
To allow a new person to send you photos, simply tap the add friend button and
share the presented code in whatever way you prefer. Display
Brightness level
Adjust the brightness level of the screen.
Display
Brightness level
Adjust the brightness level of the screen.
Sleep mode
Frameo offers a sleep mode which turns off the screen to reduce power
consumption. The default setting is to turn off the screen at 23:00 and turn
on the screen again at 07:00. To change this just set the sleep mode start/end
time. Your frame is not powered down or in standby, so you will still be able
to receive photos during sleep mode.
Slideshow
Timer
Set the duration that a photo should be displayed before showing the next
photo
Show caption
Sets whether or not to display the captions that your friends have sent with
the photo. Check to display captions. Uncheck to hide captions.
Fill frame
Sets the default frame photo setting. Check to set default to fill which makes
the photos fit the
device screen according to the most important part of the photo. Uncheck to
make the photo fit inside the screen of the device, adding blurred bars on the
sides or top/bottom
Photo display order
Sets the order in which your photos are displayed on the frame.
- By date: Photos are shown newest to latest.
- Shuffle: Photos are shuffled and shown in a random order.
Autoplay
Enables/disables autoplay of videos in the slideshow. Videos can always be
manually started regardless of this setting.
Video playback
Determines how videos should be played when autoplay is enabled.
- Loop videos: The video will loop until the slideshow timer is up.
- Play once: The video will play once and show it’s thumbnail until the timer is up.
- Play once and continue: The video will play once and continue to the next photo, or video, once it completes.
Video volume
Adjust the volume level for video sounds on the frames.
Wi-Fi
Set which Wi-Fi the frame connects to. If you are connecting to a network with
a captive portal
Connection status will say that Wi-Fi login is required and show . Tap this to
open a login
screen where you can enter credentials to access the network.
Wi-Fi details
Use to show details about the current connected Wi-Fi.
Reset Wi-Fi
Use to delete all Wi-Fi information and restart your frame
Notifications
Show notifications
Enables/disables whether notifications are shown in the slideshow (e.g. when a
new photo is
received).
Notification volume
Adjust the volume level for notification sounds.
Storage space
Enables/disables notifications shown when frame storage is low.
Backup
Enables/disables notifications shown if automatic backup has failed.
Network connection
Enables/disables notifications showing network connection status.
New photos
Enables/disables notifications shown when receiving new photos.
New friends
Enables/disables notifications shown when new friends are added.
Software update
Enables/disables notifications shown when a software update has been
installed.
Feature news
Enables/disables notifications shown when new exciting features are added.
Backup and Restore
Backup frame to external storage (e.g. microSD card)
Tap to make a backup of your photos, friends and settings. The time of the
latest successful backup is also displayed here. Any existing backup on the
external storage will be overridden!
Automatic backup
If checked, your frame will automatically take a backup within 30 hours of
receiving new photos or making changes to your frame.
Restore from backup
Before you attempt to restore your frame, start by confirming that your backup
is up-to-date. This is done by confirming the date under “Backup frame to
external storage (e.g. microSD card)”. If e.g. the last backup is too old or
if no backup is made, then press the “Backup frame to external storage (e.g.
microSD card)” button to make a new backup.
NB: To keep both the old and the new frame operational at the same time after
restoring from
backup, please make sure that both frames are updated to the latest version
beforehand.
If you wish to restore a backup on a frame that has already been setup, then
you must first reset the frame. This is done by pressing the “Reset frame”
button. This will delete all data on the Frameo and reset the Frameo to its
setup screen.
On the setup screen you can select the “Restore from backup” button which will
restore your frame according to the backup.
If the “Restore from backup” button isn’t visible, then confirm that the
external storage (e.g.
microSD card) is correctly mounted.
Reset frame
Removes all data from your frame. This will permanently remove all your
photos, friends/connections and settings.
Help
Open source libraries
Opens a list of open source libraries used in the app and their licenses.
Share anonymous analytics data
Sharing anonymous analytics data helps us tremendously to improve the Frameo
software. We understand if you do not wish to share this data with us. Keep it
checked if you wish to help us improve Frameo. Set unchecked to deny the
sharing of anonymous analytics data.
Guide
Opens the quick start guide, that was shown when you first started the frame
About
Android version
See what version of Android that is installed on the frame.
Peer ID
This is a unique ID for your photo frame. When contacting our support, please
provide this ID with your message.
MAC
Shows the MAC address of your frame.
Frameo version
Shows what version of the Frameo software is currently installed on your
frame.
Up time
Shows how long the photo frame has been powered on.
Check for update
Check if an update is available for your frame.
Beta program
If checked the device will join the Beta program where it will receive updates
more frequently and
before normal release devices.
Privacy
For more information regarding privacy, please visit
http://privacy.frameo.net
Support
Please visit http://frameo.net/helpcenter for FAQ, support and to provide
feedback.
Warranty, Compliance, Support and Safety information
For more information regarding warranty, hardware compliances, support and safety please refer to the material included in the package.
Manufacturer’s name or trade mark, commercial registration number and
address| Shenzhen Run Sheng Feng Power Supply Techonolgy Co., Ltd
commercial registration number: 91440300580068676U rd th 3 Floor, 4 Building,
Zone A Xinfu Industrial Park, Chongqing Road, Fuyong Street, Bao’an District,
Shenzhen, China
---|---
Model identifier| RSF-DY077A-0503000EU
Input voltage| 100-240V
Input AC frequency| 50/60Hz
Output voltage| 5V
Output current| 3A
Output power| 15W
Average active efficiency| 82.42% at 115V 60Hz 82.08% at 230V 50Hz
Efficiency at low load (10%)| 84.44% at 115V 60Hz 81.18% at 230V 50Hz
No-load power consumption| 0.05W at 115V 60Hz 0.07W at 230V 50Hz
Please notice – All products are subject to change without any notice. We take
reservations
for errors and omissions in the manual.
ALL RIGHTS RESERVED, COPYRIGHT DENVER A/S
Electric and electronic equipment and included batteries contains materials,
components and
substances that can be hazardous to your health and the environment, if the
waste material (discarded electric and electronic equipment and batteries) is
not handled correctly.
Electric and electronic equipment and batteries is marked with the crossed out
trash can
symbol, seen above. This symbol signifies that electric and electronic
equipment and batteries should not be disposed of with other household waste,
but should be disposed of separately.
As the end user it is important that you submit your used batteries to the
appropriate and
designated facility. In this manner you make sure that the batteries are
recycled in accordance with legislature and will not harm the environment.
All cities have established collection points, where electric and electronic equipment and batteries can either be submitted free of charge at recycling stations and other collection sites, or be collected from the households. Additional information is available at the technical department of your city.
Hereby, DENVER A/S, declares that this model DENVER PFF-1514W is in compliance
with the essential requirements and other relevant provisions of Directive
2014/53/ EU. A copy of the Declaration of Conformity may be obtained at:
denver.eu and then click the search ICON on topline of website. Write model
number: PFF-1514W. Now enter product page, andred directive is found under
downloads/other downloads Operating Frequency Range: 2412MHz-2472MHz Max
Output Power: 17dbm
DENVER A/S
Omega 5A, Soeften
DK-8382 Hinnerup
Denmark
www.facebook.com/denver.eu