Harbor Breeze ZDL1142-LED14K8030 LED Spot Light Instruction Manual
- June 8, 2024
- Harbor Breeze
Table of Contents
MODEL: #ZDL1142-LED14K8030
ITEM: #4108909
LED Spot Light
Instruction Manual
ZDL1142-LED14K8030 LED Spot Light
HARBOR BREEZE and logo design are trademarks or registered trademarks of LF,
LLC. All rights reserved.
Thank you for purchasing this Harbor Breeze product. We’ve created these easy-
to-follow instructions to ensure you spend your time enjoying the product
instead of putting it together. But, if you need more information than what is
provided here, please visit Lowes.com, search the item
number and refer to the Guides & Documents tab on the product’s page.
If you have any questions or problems, please call our customer service
department at 1-888-251-1003, 8 a.m. –
8 p.m., EST, Monday – Sunday. You could also contact us at
partsplus@lowes.com or visit
www.lowespartsplus.com.
TROUBLESHOOTING
| PROBLEM | POSSIBLE CAUSE | CORRECTIVE ACTION |
|---|---|---|
| The light does not turn on at night. | 1. The transformer is not plugged |
in or turned on.
2. Fixture connector is not properly installed
on the low voltage cable.| 1. Make sure the transformer is plugged in and
turned on.
2. Make sure the contact pins pierce the wire insulation and make proper
contact with the wire.
CARE AND MAINTENANCE
Clean the lens, lamp head and lamp stand regularly with a non-abrasive
cleaner.
Warning: Always make sure the light is unplugged and completely cool
before attempting to clean it.
WARRANTY
This fixture is warranted to be free from defects in materials and
workmanship for five (5) years from the date of original purchase.
Call 1-888-251-1003 to obtain a Return
Authorization number and further instructions.
The manufacturer will be liable for the replacement of the defective item and
will not be liable for any other loss, damage, or injury which is caused by
the product.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare
parts with package contents list. If any part is missing or damaged, do not
attempt to assemble the product.
Estimated Assembly Time: 10 minutes
No tools required.
FEELING CONFIDENT?
START YOUR NEXT PROJECT?
COMMENCEZ VOTRE NOUVEAU PROJET
Visit www.lowes.com for more information.
Printed in China
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble,
operate or install the product.
CAUTION
-
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
-
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on. The user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and the receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help. -
Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
-
This product is not a toy and must not be operated by children.
-
Do not connect this fixture to an electrical system that does not provide a means for equipment grounding.
-
Do not submerge in water. The product can be damaged.
-
Use with 18AWG minimum, underground low-voltage circuit cord.
WARNING
- Be sure the electricity to the wires you are working on is shut off. Either remove the fuse or turn off the circuit breaker.
- For use with low-voltage landscape lighting systems only.
- The wire is intended for shallow burial, less than 6 in. deep.
- Risk of Electric Shock. Install all luminaires 10 ft. or more from a pool, spa or foundation.
- Keep lamp away from material that may burn.
- Do not touch hot lens, guard or hot fixture housing.
- Do not operate or install a fixture with missing or damaged parts.
- Do not touch the LED at any time as this may cause damage to the fixture.
PACKAGE CONTENTS
INSTALLATION OVERVIEW
Insert wire from low-voltage transformer (sold separately) into the wire guide
by twisting the wire into each end of the wire guide. Align the pins on the
connector top cover so that each pin lines up with opposite sides of the wire.
Securely tighten the connector top cover making sure the pins completely
pierce the plastic shield of the wire.
OPERATING INSTRUCTIONS
Double heads around 180°, up
and down 180°.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>