Harbor Breeze 10841 LED Path Light 1-Pack Instruction Manual

Harbor Breeze 10841 LED Path Light 1-Pack Instruction Manual

Thank you for purchasing this Harbor Breeze product. We’ve created these easy- to-follow instructions to ensure you spend your time enjoying the product instead of putting it together. But, if you need more information than what is provided here, please visit Lowes.com, search the item number and refer to the Guides & Documents tab on the product’s page.
If the item is no longer for sale, or if you have any questions or problems, please call our customer service department at 888-251-1003 from 8 a.m. – 8 p.m. EST, Monday – Sunday. You could also contact us at ascs@lowes.com.

SAFETY INFORMATION

Please read and understand this entire manual before attempting to assemble, operate or install the product.

WARNING

• Do not use alkaline, standard (carbon-zinc) or Ni-Cd (nickel cadmium) batteries in our solar lights.
• Only use nickel metal hydride rechargeable batteries (Includes one rechargeable battery).
• Do not mix battery types. Only use Ni-MH (nickel metal hydride) batteries.
• Adverse conditions of cold, extreme cold, extreme heat plus humidity and dampness may affect battery performance.
• Do not open, short circuit or mutilate batteries as injury may occur.
• Batteries must be recycled or disposed of properly.
• Always purchase the correct size and grade of battery most suitable for the intended use.
• Clean the battery contacts and also those of the device prior to battery installation.
• Ensure the batteries are installed correctly with regard to polarity (+ and -).
• Remove batteries from equipment that will not be used for an extended period of time.
• Remove used batteries promptly.

PACKAGE CONTENTS

INSTALLATION OVERVIEW

CAUTION

• The ground stake is sharp. Handle with care to avoid injury.
• Clean the solar panel with a damp cloth. Do not use any chemicals or abrasives.
• Keep the solar panel free of dirt and debris.
• Do not dispose of battery in fire. Dispose of batteries in accordance with all local, state and federal regulations.

CHOOSING THE RIGHT LOCATION

Select a location with full sunlight. Shady areas will not allow the battery to be fully charged. Operating time will vary by specific location, daily weather conditions, and season. Be sure that the selected location is not close to other Nighttime light sources, such as street or porch lights as they may keep the light from turning on automatically at night.

CARE & MAINTENANCE

•  Clean the solar panel with a damp cloth. Do not use any chemicals or abrasives.

• Keep the solar panel free of snow and debris to allow the battery to charge properly.
  When relocating your solar lights from one location to another, please follow these steps :

• Carefully detach the solar light fixture from the ground or from its current location.

• The ground stake has a pointed edge, be careful when handling to avoid injury.

• Select a new location with full, direct sunlight. Shady locations will not allow the battery to charge fully and will reduce the hours of night time light.

IMPORTANT: Use only AA 700mAh nickel metal hydride (Ni-MH) rechargeable batteries for the solar lights. These are available at most hardware stores.

WARRANTY

• Manufacturer warrants this product to be free for one (1) year against any defects that are due to faulty materials or workmanship. Manufacturer shall promptly correct such defects by repair or replacement, at its option. This warranty covers only product defects and shall expire one year after the date of purchase by the original purchaser. Proof of Purchase (Sales Receipt) is required.

TROUBLESHOOTING

PROBLEM

1. Light stops working after a period of working properly.
2. The light only operates for a short duration in the evening.

POSSIBLE CAUSE

1. The battery is not adequately charged.
2. The lights are located in an area that does not provide enough sunlight.
3. The light level is too high for the solar lights to turn on.
4. The battery may be weak or can no longer produce a charge.

CORRECTIVE ACTION

1. Place the unit in direct sunlight for three sunny days.
2. Move the light to a sunnier location.
3. The solar lights are designed to turn on when it is dark outside. Make sure the solar top housing is not under any direct light source when testing.
4. . Replace the battery.

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list. If any part is missing or damaged, do not attempt to assemble the product.

Estimated Assembly Time: 3-5 minutes.
NO TOOLS REQUIRED

FEELING CONFIDENT? START YOUR NEXT PROJECT

Visit lowes.com for more information.

Made in China

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>