Harbor Breeze ZDL1192-L19K8030 LED Path Light Instruction Manual

Harbor Breeze ZDL1192-L19K8030 LED Path Light Instruction Manual

Thank you for purchasing this Harbor Breeze product. We’ve created these easy- to-follow instructions to ensure you spend your time enjoying the product instead of putting it together. But, if you need more information than what is provided here, please visit Lowes.com, search the item number and refer to the Guides & Documents tab on the product’s

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes
No tools required.

FEELING CONFIDENT? START YOUR NEXT PROJECT

Visit : www.lowes.com for more information.

SAFETY INFORMATION

Please read and understand this entire manual before attempting to assemble, operate or install the product.

WARNING
Be sure the electricity to the wires you are working on is shut off. Either remove the fuse or turn off the circuit breaker.
For use with low-voltage landscape lighting systems only.
The wire is intended for shallow burial, less than 6 in. deep.
Install all luminaires 10 ft. or more from a pool, spa or foundation.
Keep lamp away from material that may burn.
Do not touch hot lens, guard or hot fixture housing.
Do not operate or install a fixture with missing or damaged parts.
Do not touch the LED at any time as this may cause damage to the fixture.

CAUTION

• This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation./Este dispositivo cumple con la sección 15 de las reglas de la FCC. El funcionamiento está sujeto a las siguientes dos condiciones: (1) este dispositivo no debe causar interferencia perjudicial y (2) debe aceptar cualquier interferencia recibida, incluida la interferencia que pudiese causar un funcionamiento no deseado.

• This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
  designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio
  frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception, which can
  be determined by turning the equipment off and on. The user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna./Reorientar o reubicar la antena de recepción.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

• Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the
  equipment.

• This product is not a toy and must not be operated by children.

• Do not connect this fixture to an electrical system that does not provide a means for equipment grounding.

• Do not submerge in water. The product can be damaged.

• Use with 18AWG minimum, underground low-voltage circuit cord.

PACKAGE CONTENTS

INSTALLATION OVERVIEW

1. 

2. 

3. 

4. 
   For 16 AWG cable, insert the wire into the connector directly.
   
   Wire adapter
   For 12-14 AWG landscape lighting cable, remove the wire adapter before inserting the wire into the connector. Then tighten it.

5. 
   Insert wire from low-voltage transformer (sold separately) into the wire guide by twisting the wire into each end of the wire guide. Align the pins on the connector top cover so that each pin lines up with opposite sides of the wire. Securely tighten the connector top cover making sure the pins completely pierce the plastic shield of the wire.

TROUBLESHOOTING

PROBLEM

| POSSIBLE CAUSE|

CORRECTIVE ACTION

---|---|---

The light does not turn on at night.

|

1. The transformer is not plugged in or turned on. transformador no está enchufado o encendido.
2. Fixture connector is not properly installed on the low voltage cable.

|

1. Make sure the transformer is plugged in and turned
2. Make sure the contact pins pierce the wire insulation and make proper contact with the wire.

HARBOR BREEZE and logo design are trademarks or registered trademarks of LF,LLC. All rights reserved.

Questions, problems or missing parts?
Before returning, contact us on:
888-251-1003, 8 a.m. – 8 p.m., EST, Monday – Sunday or ascs@lowes.com.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>