Harbor Breeze 10840 LED Path Light Instruction Manual
- May 15, 2024
- Harbor Breeze
Table of Contents
Harbor Breeze 10840 LED Path Light Instruction Manual
Thank you for purchasing this Harbor Breeze product. We’ve created these easy- to-follow instructions to ensure you spend your time enjoying the product instead of putting it together. But, if you need more information than what is provided here, please visitLowes.com, search the item number and refer to the Guides & Documents tab on the product’s page.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 3-5 minutes.
NO TOOLS REQUIRED
FEELING CONFIDENT? START YOUR NEXT PROJECT
Visit lowes.com for more information.
Made in China
TROUBLESHOOTING
| PROBLEM | POSSIBLE CAUSE | CORRECTIVE ACTION |
|---|
- Light stops working after a period of working properly.
- The light only operates for a short duration in the evening
|
- The battery is not adequately charged.
- The lights are located in an area that does not provide enough sunlight.
|
- Place the unit in direct sunlight for three sunny days.
- Move the light to a sunnier location.
- The solar lights are designed to turn on when it is dark outside. Make sure the solar top housing is not under any direct light source when testing4. Replace the battery.
CARE & MAINTENANCE
-
Clean the solar panel with a damp cloth.
Do not use any chemicals or abrasives. -
Keep the solar panel free of snow and debris to allow the battery to charge properly.
-
Carefully detach the solar light fixture from the ground or from its current location.
-
The ground stake has a pointed edge, be careful when handling to avoid injury.
-
Select a new location with full, direct sunlight. Shady locations will not allow the battery to charge fully and will reduce the hours of night time light.
IMPORTANT: Use only AA 800mAh nickel metal hydride (Ni-MH) rechargeable batteries for the solar lights. These are available at most hardware stores.
WARRANTY
- Manufacturer warrants this product to be free for one (1) year against any defects that are due to faulty materials or workmanship. Manufacturer shall promptly correct such defects by repair or replacement, at its option. This warranty covers only product defects and shall expire one year after the date of purchase by the original purchaser. Proof of Purchase (Sales Receipt) is required.
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install the product.
WARNING
- Do not use alkaline, standard (carbon-zinc) or Ni-Cd (nickel cadmium) batteries in our solar lights.
- Only use nickel metal hydride rechargeable batteries (Includes one rechargeable battery).
- Do not mix battery types. Only use Ni-MH (nickel metal hydride) batteries.
- Adverse conditions of cold, extreme cold, extreme heat plus humidity and dampness may affect battery performance.
- Do not open, short circuit or mutilate batteries as injury may occur.
- Batteries must be recycled or disposed of properly
CONTAINS NICKEL METAL NONINTERCHANGEABLE BATTERIES.
CAUTION
-
The ground stake is sharp. Handle with care to aviod injury.
-
Clean the solar panel with a damp cloth.
Do not use any chemicals or abrasives -
Keep the solar panel free of dirt and debris.
-
Do not dispose of battery in fire. Dispose of batteries in accordance with all local,state and federal regulations.
CHOOSING THE RIGHT LOCATION
Select a location with full sunlight. Shady areas will not allow the battery
to be fully charged. Operating time will vary by specific location, daily
weather conditions, and season. Be sure that the selected location is not
close to other nighttime light sources, such as street or porch lights as they
may keep the light from turning on automatically at night.
PACKAGE CONTENTS
INSTALLATION OVERVIEW
HARBOR BREEZE and logo design are trademarks or registered trademarks of LF, LLC. All rights reserved.
