GNB LAB Alle Lux 5 Lamp User Manual

GNB LAB Alle Lux 5 Lamp

Technical specifications

Number of UV LEDs: 24
Max Power: 48W
Wave lenght UV: 365+405nm
Power: Rated input: 100/240V 50/60Hz 1A
Size: 220 x 195 x 105mm
lamp model : SUN 5
No. Certificate: MOSTCN19081612
MOSTCN19081613
Cures UV/Builder/LED gels.

Instructions

1. Infrared motion sensor
2. Power indicator
3. Time switch button – 10s
4. Time switch button – 30s
5. Time switch button – 60s
6. Reduced heat mode (99s) / ON/OFF button
7. Power supply

Operating instructions

1. Connect the device to the power supply.

2. To turn on the lamp, hold the ON/OFF button for 1-2s. If the display the countdown starts, press the button again to enter the standby mode.

3. You can select one of the available timer options 10s/30s/60s/99sec
   In 99s mode, the heating power is gradually increased so that you can reduce the effect of nail plate burning caused by gel curing.

4. You can also start without choosing the time. To do this, put your hand in the device, and the heating will start automatically when the sensor detects movement. The maximum operating time is 120 s.

Warning:
Use the correct voltage for the lamp. Protect the device from contact with water and others fluids.
Do not use the lamp: – In damp rooms – If the power supply is damaged

• If the device or connection cable is damaged – If the timer buttons are not working

The device should not be left in operation for more than 60 minutes, as this may reduce its lifetime. When the device temperature is too high, the status „07p” will appear on the display. To resume operation, wait until the message disappears.
If you notice sudden changes on your skin, consult a doctor immediately. The device is designed for indoor use.
KEEP OUT OF THE REACH OF CHILDREN.

Warranty card no………………………………………………………………………………………………………………..
Model……………………………………………………….
Parameters……………………………………………………….
Price…………………………………………………………..
Sale date…………………………………………………………..

Terms of warranty

1. The condition for accepting the device for repair is to have a warranty card.
2. Warranty card without completed fields filed with the name of the device, parameters and customer address is invalid.
3. The warranty is valid for twelve months from the date of sale of the device.
4. The defects revealed during this period will be removed for free of charge within no more than 28 days from the date of delivery of the device at the customer’s expense and will be returned functional at the guarantor’s expense.
5. The guarantee does not exclude, limit or suspend the rights of the buyer resulting from it from the provisions on the warranty for defects in the sold item.
6. The warranty does not include:
   • damage resulting from improper use, storage or maintenance of the device
   • mechanical, thermal, chemical and all other damages what will be intentional or negligent action by the user and what was be due at external force
   • UV bulbs for the device
7. The guarantee is valid only on the territory of the Republic of Poland.
8. Person who submits a complaint is obliged to deliver the device to the seller in the original packaging at your expense. Damage caused by insufficient securing of the equipment shipment is not subject to warranty repairs.
9. Loss of warranty:
   • in the case of repairs being an arbitrary action of the user or other unauthorized persons
   • in the event of improper or inconsistent with the instructions for use, maintenance or storage
   • in the case of unauthorized modifications or design changes
10. Under the warranty, the guarantor undertakes to first remove the defect by means of repair of equipment. The buyer is entitled to replace the equipment with a new one only if:
    • a manufacturing defect that cannot be removed was found during the warranty period,
    • in the case when within the warranty period 3 repairs will be required, and the equipment still has defects that make it impossible to operate in accordance with intended use,
    • If there are reasons to replace the equipment with a new one but there are any obstacles that make this exchange impossible, e.g. due to the lack of equipment in stock, the guarantor will refund the price paid.
11. The device is intended for professional and in case of other use the warranty is void.
12. The customer is obliged to describe of the hardware malfunctions and occurring defects and to attach the prepared description for the warranty card.

Telephone………………………………………………………………………………………………………………………………
Address ………………………………………………………………………………………………………………………………….
First name and last name…………………………………………………………………………………………………….

References

• GNBLab

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>