GNB LAB RH003 Wax Warmer User Manual
- June 3, 2024
- GNB LAB
Table of Contents
GNB LAB RH003 Wax Warmer
WAX WARMER RH003
- Before installing and maintaining the appliance, please read carefully these operating instructions.
- This manual should be retained and kept in a safe place to enable users of the appliance to consult it in the future.
- Thanks to the clear results and ease of application, wax epilations have become very popular, both in beauty salons and at home.
- This treatment is particularly recommended for dry and ageing skin.
Technical parameters
- Model: RH 003
- Power supply : AC 220-240V 50-60Hz
- Power: 65W
- Nr certyfikatu: ST20170323001-EMC / ST20170322102-LVD
Operating and application instructions
- Make sure skin is completely clean before use.
- Place the wax in the unit.
- Plug the heater into the power supply and switch on the appliance.
- Heat the wax for about 20-30 minutes.
- Spread the product in the direction of hair growth, applying it to an area of approximately 15-18 cm2 at a time. Make sure the wax is at the right temperature – if it is too warm, wait for it to cool or apply the wax to the epilation strips.
- Apply an epilation strip to the pre-spread wax. Press with the palm of your hand.
- Tear off the epilation strip against the direction of hair growth.
- After epilation, remove wax residue with an after-epilation product.
- Apply moisturiser to cleansed skin
ATTENTION!
- Disconnect the appliance from the power supply during cleaning.
- Do not epilate sensitive skin, damaged skin or skin with other problems.
- Do not expose the skin to the sun or UV rays for 24 hours after depilation.
- To clean the appliance, use a soft cloth soaked in liquid wax-dissolving liquid. Do not clean or soak the unit with water.
IMPORTER GNBLab Michał Szewczyk, Piotr Malinowski s.c. Piotrkowska 270 90-361
Łódź, Polska
gnb-lab.com
Made in P.R.C.
References
Read User Manual Online (PDF format)
Loading......