STIHL GTA 26 Cordless Cutter Set Garden System Instruction Manual
- June 10, 2024
- STIHL
Table of Contents
- STIHL GTA 26 Cordless Cutter Set Garden System
- Product Information
- Product Usage Instructions
- FAQs
- Introduction
- Guide to Using this Manual
- Overview
- Rating plate with the machine number
- Safety Precautions
- Charging the Battery, LEDs
- Assembling the Garden Pruner
- Removing and Fitting the Battery
- Switching On and Off
- Checking the Garden Pru- ner and Battery
- Using the Garden Pruner
- Transporting
- Cleaning
- Maintenance
- Troubleshooting
- Specifications
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
STIHL GTA 26 Cordless Cutter Set Garden System
Product Information
Specifications
- Model: GTA 26
- Weight: Varies based on components
- Power Source: Battery
- Manufacturer: STIHL
Product Usage Instructions
1. Introduction
Welcome to the STIHL GTA 26 Garden Pruner! This product is designed to help you efficiently and safely manage your garden tasks. Please read the user manual carefully before using the product.
2. Getting Started
Before using the GTA 26, ensure that the battery is fully charged using the provided charger. Insert the battery into the battery compartment until it locks securely in place.
3. Using the Garden Pruner
Hold the grip firmly for control and safety. Activate the LEDs using the pushbutton to check the battery status. Use the trigger to switch the pruner on and off. The protective hood and chain scabbard are essential for safety during operation.
4. Maintenance
Regularly inspect the saw chain, guide bar, and chain sprocket for any signs of wear or damage. Keep the components clean and lubricated for optimal performance.
5. Safety Precautions
Always wear appropriate safety gear, including gloves and eye protection, when using the GTA 26. Avoid contact with the saw chain and follow all safety instructions provided in the manual.
FAQs
- Q: How do I know when to recharge the battery?
- A: The LEDs on the garden pruner indicate the state of charge of the battery. When the LEDs show low battery levels, it’s time to recharge.
- Q: Can I use the GTA 26 for cutting thick branches?
- A: The GTA 26 is suitable for light pruning and cutting tasks. For thicker branches, consider using a more powerful tool.
GTA 26
2 – 26 26 – 53 53 – 76 76 – 103 103 – 127 127 – 151 151 – 177 177 – 204 204 – 231 231 – 261 261 – 287 287 – 319 319 – 346
Instruction Manual Manual de instrucciones Skötselanvisning Käyttöohje Betjeningsvejledning Bruksanvisning Návod k pouzití Használati utasítás Instruções de serviço Instrukcja uytkowania Instruciuni de utilizare
Translation of Original Instruction Manual 0000008739_016_GB
Printed on chlorine-free paper Paper is recyclable.
Introduction
Dear Customer,
Thank you for choosing STIHL. We develop and manufacture our quality products
to meet our customers’ requirements. The products are designed for reliability
even under extreme con- ditions.
STIHL also stands for premium service quality. Our dealers guarantee competent
advice and instruction as well as comprehensive service support.
STIHL expressly commit themselves to a sus- tainable and responsible handling
of natural resources. This user manual is intended to help you use your STIHL
product safely and in an environmentally friendly manner over a long service
life.
We thank you for your confidence in us and hope you will enjoy working with
your STIHL product.
IMPORTANT! READ BEFORE USING AND KEEP IN A SAFE PLACE FOR REFERENCE.
Guide to Using this Manual
2.1 Applicable Documentation
Local safety regulations apply. Read, understand and save the following
documents in addition to this instruction man- ual: Information on STIHL
Multioil Bio:
www.stihl.com/safety-data-sheets Safety information for STIHL batteries and
products with built-in batteries: www.stihl.com/safety-datasheetswww.stihl.com
/safety-data-sheets
2.2 Warning Notices in Text
DANGER
This notice refers to risks which result in seri- ous or fatal injury. Serious
or fatal injuries can be avoided by taking the precautions mentioned.
WARNING
This notice refers to risks which can result in serious or fatal injury.
Serious or fatal injuries can be avoided by taking the precautions mentioned.
NOTICE
This notice refers to risks which can result in damage to property. Damage to
property can be avoided by tak- ing the precautions mentioned.
2.3 Symbols in Text
This symbol refers to a chapter in this instruction manual.
© ANDREAS STIHL AG & Co. KG 2024 0458-694-9821-B. VA6.A24.
Dr. Nikolas Stihl 2
0458-694-9821-B
Overview
3 Overview
3.1 Garden Pruner, Battery and Charger
1
2
3
5
4 6
7
8
14
9
11
12
10
13
15
16
17
22
20
0000093106_004
18
19
21
1 Grip For holding and controlling the garden pruner.
2 Protective hood Helps protect user from contact with saw chain.
3 Chain scabbard The chain scabbard protects against contact with the saw
chain.
4 Limit stop Supports the garden pruner against wood while cutting.
5 Locking lever The locking lever unlocks the trigger.
6 Saw chain The saw chain cuts the wood.
7 Guide bar The guide bar supports and guides the saw chain.
English
8 Chain sprocket The chain sprocket drives the saw chain.
9 Wing nut Secures the chain sprocket cover to the gar- den pruner.
10 Chain sprocket cover Covers the chain sprocket and secures the guide bar to
the garden pruner.
11 LEDs The LEDs indicate the state of charge of the battery and any faults.
12 Pushbutton Activates the LEDs on the garden pruner.
13 Trigger Switches the garden pruner on and off.
14 Control handle For operating, holding and controlling the gar- den pruner.
15 Battery compartment The battery compartment holds the battery.
16 Battery Supplies power to the garden pruner.
17 Locking hook Holds the battery in the battery compartment.
18 Charger The charger charges the battery.
19 LED The LED indicates the status of the charger.
20 Connecting cable The connecting cable connects the charger to the mains
plug.
21 Mains plug The mains plug connects the connecting cable with a socket
22 Bag For transporting and storing the garden pru- ner, battery and charger.
The bag only comes with the set (consisting of garden pruner, bat- tery and
charger).
Rating plate with the machine number
3.2 Symbols
Meanings of symbols that may be on the garden pruner, battery and charger:
This symbol shows the direction of rotation of the saw chain. The LED lights
up steady or flashes green. The battery is charging.
0458-694-9821-B
3
English
The LED flashes red. There is no elec- trical contact between the battery and
the charger, or there is a fault in the battery or in the charger. Length of
guide bar that may be used.
Safety Precautions
4.1.2 Battery Meaning of warning symbols on the battery:
Observe safety notices and take the necessary precautions.
LWA
Guaranteed sound power level in accordance with Directive 2000/14/EC
in dB(A) for the purpose of comparing
the sound emissions of products.
The information next to the symbol indi- cates the energy content of the battery according to the cell manufacturer’s specifi- cation. The energy content available in operation is lower.
Operate the electric product in a dry place, indoors only.
Do not dispose of the product with your household waste.
Read and understand the user manual and keep it in a safe place for reference.
4 Safety Precautions
4.1 Warning Signs
4.1.1 Garden pruner
Meanings of warning symbols on the garden pru- ner:
Observe safety notices and take the necessary precautions.
Read and understand the User Manual and keep it in a safe place for refer-
ence. Protect the battery against heat and fire.
Do not immerse the battery in liquids.
4.1.3 Charger Meanings of the warning signs on the charger:
Observe safety notices and take the necessary precautions. Read and understand
the User Manual and keep it in a safe place for refer- ence. Protect the
charger from rain and dampness.
Read and understand the User Manual and keep it in a safe place for refer-
ence. Wear safety glasses.
Hold the garden pruner firmly with both hands. Do not touch the moving saw
chain.
Remove the battery during work inter- ruptions, transport, storage, mainte-
nance or repair. Protect garden pruner from rain and dampness.
4.2 Intended Use
The STIHL GTA 26 garden pruner is designed to cut wood.
The garden pruner must not be used in the rain.
The STIHL AS battery supplies power to the gar- den pruner.
The STIHL AL 1 charger recharges the STIHL AS battery.
WARNING
Batteries and chargers not approved by STIHL for the garden pruner may cause a
fire or explosion. Persons may be seriously or fatally injured, and property
may be damaged. Use the garden pruner with a STIHL AS battery. Recharge the
STIHL AS battery with a STIHL AL 1 charger.
Using the garden pruner, battery or the charger for purposes for which they
were not designed may result in serious or fatal injuries, and damage to
property may occur.
4
0458-694-9821-B
4 Safety Precautions
English
Use the garden pruner, battery and charger
Wear close-fitting safety glasses.
as described in this User Manual.
Suitable safety glasses are tested in accordance with EN 166 or national
4.3 Requirements for users
regulations and available commer-
cially with the corresponding mark-
WARNING
ing.
Users without adequate training or instruction cannot recognize or assess the risks involved in using the garden pruner, battery and charger. The user or other persons may sus- tain serious or fatal injuries.
Wear long trousers. Falling objects can cause head injuries.
If objects are likely to fall while working: wear a hard hat.
Dust can be whipped up during operation: Whipped up dust can damage the
respiratory
Read and understand the User Man- ual and keep it in a safe place for reference.
passages and cause allergic reactions. If dust is generated: Wear a dust respirator
mask.
If you pass on the garden pruner, battery or charger to another person: Always
give them the User Manual.
Make sure that the user meets the following conditions: The user is rested.
The user is physically and mentally capable of operating and working with
the garden pruner, battery and charger. If the user is able to operate the
equip- ment but is physically, sensorially or mentally impaired, the user may
only work with the equipment under the supervision of or after receiving
instruc- tion from a responsible person. The user is able to recognize and
Inappropriate clothing can snag on wood, brush or the garden pruner. Not
wearing suita- ble clothing may result in serious injury. Wear close-fitting
clothing. Remove scarves and jewelry.
The user may cut himself or herself on wood while working. The user may come
into con- tact with the saw chain during cleaning or servicing. This may
result in injury to the user. Wear work gloves made from resistant material.
Wearing unsuitable footwear may cause the user to slip. This may result in
injury to the user. Wear sturdy, closed-toed footwear with high-grip soles.
assess the risks involved in using the garden pruner, battery and charger.
4.5 Work Area and Surroundings
The user is an adult or is being trained
4.5.1 Garden pruner
in an occupation under supervision according to national regulations.
WARNING
The user has received instruction from a Innocent bystanders, children and animals are
STIHL authorized dealer or other expe-
not aware of the dangers of the garden pruner
rienced user before working with the
or flying debris. Bystanders, children and ani-
garden pruner and the charger for the
mals may be seriously injured and damage to
first time.
property may occur.
The user is not under the influence of
Keep bystanders, children and animals
alcohol, medication or drugs.
away from the work area.
If you are unsure: Contact a STIHL author-
Do not leave the garden pruner unattended.
ized dealer.
Make sure that children cannot play with
4.4 Clothing and equipment
the garden pruner. The garden pruner is not waterproof. Working
WARNING
Long hair can be pulled into the garden pruner during operation. This may
result in serious injury to the user.
in the rain or a damp location may result in an electric shock. This can
result in injuries to the user and may damage the garden pruner.
Do not work in the rain or a damp location.
Tie up and confine long hair above your
shoulders.
Objects can be thrown at high speed during
Electrical components of the garden pruner
operation. This may result in injury to the user.
can produce sparks. Sparks may cause a fire
0458-694-9821-B
5
English
or an explosion in an easily combustible or explosive environment. This can
result in seri- ous or fatal injuries and damage to property. Do not work in
an easily combustible or
explosive environment.
4.5.2 Battery
WARNING
Bystanders, children and animals cannot rec- ognize or assess the dangers of
the battery. Bystanders, children and animals may be seri- ously injured. Keep
bystanders, children and animals away from the work area. Do not leave the
battery unattended. Make sure that children cannot play with the battery.
The battery is not protected against all ambi- ent conditions. If the battery
is exposed to cer- tain ambient conditions, the battery may catch fire,
explode or be irreparably damaged. This may result in serious injury to people
and damage to property. Protect battery from heat and fire. Do not throw the
battery into a fire.
Do not charge, use and store the battery outside of the specified temperature
limits, 19.7. Do not immerse the battery in liq- uids.
Keep battery away from small metal parts. Do not expose the battery to high
pressure. Do not expose the battery to microwaves. Protect the battery against
chemicals and
salts.
4.5.3 Charger
WARNING
Bystanders and children are not aware of and cannot assess the dangers of a
charger or electric current. Bystanders, children and ani- mals may be
seriously or fatally injured. Keep bystanders, children and animals away from
the work area. Make sure that children cannot play with the charger.
The charger is not waterproof. If you work in rain or in a damp environment,
an electric shock may occur. The user may be injured and the charger may be
damaged.
4 Safety Precautions
Do not operate it in the rain or in a damp environment.
The charger is not protected against all ambi- ent conditions. If the charger
is exposed to certain ambient conditions, it may catch fire or explode. This
may result in serious injury to people and damage to property. Operate the
charger in an enclosed, dry room. Do not operate the charger in a flammable
environment or in an explosive environ- ment. Do not operate the charger on a
readily combustible surface. Do not use and store the charger outside of the
specified temperature limits, 19.7.
People may trip over the connecting cable. People may be injured and the
charger may be damaged. Lay the connecting cable flat on the floor.
4.6 Safe Condition
4.6.1 Garden pruner The garden pruner is in a safe condition if the fol-
lowing points are observed: Garden pruner is not damaged. Garden pruner is
clean and dry. Chain guard is mounted. The chain guard is undamaged and
has not
been modified. The controls function properly and have not
been modified. The saw chain is lubricated. Wear marks on the chain
sprocket are not
deeper than 0.5 mm. A combination of guide bar and saw chain rec-
ommended in this User Manual is mounted. The guide bar and saw chain are
properly
mounted. The saw chain is properly tensioned. Genuine STIHL accessories
designed for this
garden pruner model are installed. The accessories are correctly attached.
WARNING
If not in safe condition, components may no longer operate correctly and
safety devices may be disabled. There is a risk of serious or fatal injury.
Work only with an undamaged garden pru- ner. If the garden pruner is dirty or
wet: Clean the garden pruner and allow it to dry.
6
0458-694-9821-B
4 Safety Precautions
Never modify the garden pruner. Exception: Mounting a combination of guide bar
and saw chain recommended in this User Man- ual.
Never use the garden pruner without the chain guard.
If the chain guard is damaged or has been modified: Do not work with the
garden pru- ner.
If the controls do not function properly: Do not work with the garden pruner.
Fit genuine STIHL accessories designed for this garden pruner model.
Mount the guide bar and saw chain as described in this User Manual.
Attach accessories as described in this user manual or in the user manual for
the acces- sories.
Never insert objects into the garden prun- er’s openings.
Replace worn or damaged labels. If you have any doubts, be sure to consult a
STIHL dealer.
4.6.2 Guide bar The guide bar is in a safe condition if the follow- ing points
are observed: Guide bar is not damaged. Guide bar is not deformed. At
least the minimum groove depth is main-
tained, 19.3. Bar groove is not pinched or splayed.
WARNING
If the guide bar is not in a safe condition, it can no longer support and
guide the saw chain properly. The rotating saw chain can jump off the guide
bar. This can result in serious or fatal injuries. Work only with an undamaged
guide bar. If the groove depth is less than the mini- mum depth: Replace the
guide bar. If you have any queries: Contact a STIHL servicing dealer for
assistance.
4.6.3 Saw Chain The saw chain is in a safe condition if the follow- ing points
are observed: Chain is not damaged. Chain is properly sharpened. The
service marks on the cutters are still visi-
ble.
WARNING
If components do not comply with safety requirements, they will no longer
function
English
properly and safety devices may be rendered inoperative. This can result in
serious or fatal injuries. Work only with an undamaged saw chain. Sharpen the
chain properly. If you have any queries: Contact your
STIHL servicing dealer for assistance.
4.6.4 Battery The battery is in a safe condition if the following points are
observed: Battery is undamaged. The battery is clean and dry. Battery
functions properly and has not been
modified.
WARNING
A battery that is not in a safe condition cannot operate safely. Persons may
be seriously injured. Never work with a damaged battery. Never attempt to
charge a damaged or defective battery. If the battery is dirty: Clean the
battery. If the battery is wet or damp: Allow the bat- tery to dry, 19.8.
Never attempt to modify the battery. Never insert objects in the battery’s
open- ings. Never bridge the battery’s contacts with metallic objects (short
circuit). Do not open the battery. Replace worn or damaged labels.
Fluid may leak from a damaged battery. If that liquid comes into contact with
the skin or eyes, the skin or eyes may be irritated. Avoid contact with the
liquid. If skin contact occurs: Wash affected areas of skin with plenty of
water and soap. In the event of contact with eyes: Rinse eyes with plenty of
water for at least 15 minutes and consult a doctor.
A damaged or defective battery may smell unusual, emit smoke or burn. Persons
may be seriously or fatally injured, and property may be damaged. If the
battery smells unusual or emits smoke: do not use the battery and keep it away
from combustible substances. If the battery catches fire: Attempt to extin-
guish the battery with a fire extinguisher or water.
0458-694-9821-B
7
English
4.6.5 Charger The charger is in a safe condition if the following points are
observed: Charger is undamaged. Charger is clean and dry.
WARNING
If components do not comply with safety requirements, they will no longer
function properly and safety devices may be rendered inoperative. This can
result in serious or fatal injuries. Do not use a damaged charger. If the
charger is dirty or wet: Clean the charger and allow it to dry. Never attempt
to modify the charger. Never insert objects in the charger’s open- ings. Never
bridge the charger’s contacts with metallic objects (short circuit). Do not
open the charger.
4.7 Operation
WARNING
Always work within calling distance of others in case help is needed. Make
sure than persons outside the work area are within calling distance.
The user cannot concentrate on the work in certain situations. The user can
lose control of the garden pruner, stumble or fall and be seri- ously injured.
Work calmly and carefully. If light and visibility are poor: Do not work with
the garden pruner. Operate the garden pruner alone. Do not work above shoulder
height. Watch out for obstacles. Stand on the ground while working and keep a
good balance. If it is necessary to work at heights: Use a lift bucket or a
safe platform. If you begin to feel tired: Take a break.
The rotating saw chain can cut the operator. This can result in serious
injuries. Do not touch the rotating saw chain. If the saw chain is blocked by
an object: Switch off the garden pruner and remove the battery. Then remove
the object caus- ing the blockage.
The rotating chain becomes hot and expands. If the chain is not lubricated
sufficiently or not re-tensioned at regular intervals, it may come off the
guide bar or break. This can result in serious injuries and damage to
property.
8
4 Safety Precautions
Use STIHL Multioil Bio or an equivalent bio- degradable multifunctional oil.
Lubricate the saw chain after every break to recharge the battery.
Check chain tension regularly during cutting work. If chain tension is
insufficient: Ten- sion the chain.
The guide bar, saw chain and chain sprocket can become hot during operation.
There is a risk of burn injuries. Do not touch the hot guide bar, saw chain or
chain sprocket. Wait for the guide bar, saw chain and chain sprocket to cool
down. Wear work gloves made of durable mate- rial.
If the behavior of the garden pruner changes during operation or feels
unusual, it may no longer be in a safe condition. This can result in serious
injuries and damage to property. Stop work, remove the battery and contact
your STIHL servicing dealer for assistance.
Vibrations may occur while using the garden pruner. Wear gloves. Take regular
breaks. If signs of circulation problems occur: Seek medical advice.
Sparks may occur if the rotating chain makes contact with a hard object.
Sparks may cause a fire in an easily combustible location. This can result in
serious or fatal injuries and dam- age to property. Do not work in an easily
combustible loca- tion.
Note that the saw chain continues to rotate for a short period after you
release the trigger. The rotating saw chain can cut the user. This can result
in serious injuries. Wait for the chain to come to a standstill.
DANGER
Working near live electric cables can result in accidental contact with the
chain and damage the cables. This can result in serious or fatal injuries. Do
not work near live electric cables.
0458-694-9821-B
4 Safety Precautions
4.8 Reactive Forces
4.8.1 Reactive Forces
The garden pruner is pulled away from the oper- ator when the bottom of the
bar is used for cut- ting.
WARNING
If the rotating chain makes contact with a hard object and is suddenly
pinched, the garden pruner is abruptly jerked away from the opera- tor. This
can result in personal injuries. Hold the garden pruner firmly with both
hands. Use the working techniques described in this instruction manual. Work
with the chain guard properly moun- ted. Work with an undamaged chain guard
that has not been modified. Always cut with a properly sharpened and tensioned
saw chain. Keep the guide bar straight in the cut. Apply the stop properly.
Cut with the motor running at full speed.
4.9 Charging
WARNING
A damaged or defective charger may produce an unusual smell or emit smoke
during the charging process. This may result in personal injuries and damage
to property. Disconnect the plug from the wall outlet.
The charger can overheat and cause a fire if heat dissipation is inadequate.
This can result in serious or fatal injuries and damage to prop- erty. Do not
cover the charger.
4.10 Connecting to the power supply
Contact with live components may occur for the following reasons: The
connecting cable or the extension cord is
damaged.
0000-GXX-9358-A0
English
The mains plug of the connecting cable or extension cord is damaged.
The socket is not properly installed.
DANGER
Contact with live parts may result in electric shock. This may result in
serious or fatal injury to the user. Make sure that the connecting cable,
exten- sion cord and their mains plugs are undam- aged. If the connecting
cable or the extension cord is damaged: Do not touch the damaged area.
Disconnect the mains plug from the power supply. Make sure your hands are dry
before touch- ing the connecting cable, extension cord or mains plugs. Plug
the mains plug of the connecting cable or extension cord into a properly
installed, shockproof socket with the correct fuse rat- ing. Install the
charger with a ground fault circuit interrupter (30 mA, 30 ms).
A damaged or unsuitable extension cable can result in electric shock. There is
a risk of seri- ous or fatal injury. Use an extension cable with the correct
cable cross-section, 19.6.
WARNING
Overvoltage can occur in the charger if the line voltage or frequency are
incorrect during charging. The charger may be damaged. Make sure that the
mains voltage and the mains frequency of the power supply match the data on
the rating plate of the charger.
If the charger is connected to a power strip, electrical components may be
overloaded dur- ing the charging process. The components may overheat and
cause a fire. Persons may be seriously or fatally injured, and property may be
damaged. Ensure that the technical specifications for the power strip are not
exceeded by the information on the rating plate of the charger and of all
electrical devices connec- ted to the power strip.
An incorrectly routed connecting cable or extension cord may be damaged, and
people may trip over it. People may be injured, and the connecting cable or
extension cord may be damaged.
0458-694-9821-B
9
English
Route and mark the connecting cable and extension cord so that people will not
trip over them.
Route the connecting cable and extension cord so that they are not under
tension or tangled.
Route the connecting cable and extension cord so that they will not be
damaged, kinked or crushed and will not be chafed.
Protect the connecting cable and extension cord from heat, oil and chemicals.
Lay the connecting cable and extension cord on a dry surface.
The extension cable warms up in operation. If that heat cannot escape, it may
cause a fire. If using a cable reel: completely unroll the cable reel.
If wiring and pipes are laid in the wall, they may be damaged if the charger
is mounted on the wall. Contact with wiring can result in elec- tric shock.
This may result in serious injury to people and damage to property. Make sure
there is no wiring or pipes in the wall at the proposed mounting site.
If the charger is not mounted on the wall as described in this User Manual,
the charger or the battery may fall or the charger may over- heat. This may
result in injury to people and damage to property. Mount the charger on a wall
as described in this User Manual.
If the charger is mounted on a wall with the battery inserted, the battery may
fall out of the charger. This may result in injury to people and damage to
property. Mount the charger on the wall first before inserting the battery.
4.11 Transporting
4.11.1 Garden pruner
WARNING
The garden pruner may turn over or shift dur- ing transport. This may result
in personal inju- ries and damage to property. Remove the battery.
4 Safety Precautions
straps or a net to prevent it turning over and moving.
4.11.2 Battery
WARNING
The battery is not protected against all ambi- ent conditions. The battery may
be damaged if it is exposed to certain ambient conditions, and damage to
property may occur. Never transport a damaged battery. If a bag is supplied:
Transport the battery in the bag supplied.
The battery may turn over or shift during trans- port. This may result in
injury to people and damage to property. Pack the battery in packaging in such
a way that it cannot move. Secure the packaging so that it cannot move.
4.11.3 Charger
WARNING
The charger can turn over or move while being transported. This may result in
personal inju- ries and damage to property. Disconnect the plug from the wall
outlet. Remove the battery. Transport the charger in the bag supplied. If no
bag is supplied with the charger: Secure the charger with lashing straps,
belts or a net to prevent it turning over and moving.
The connecting cable must not be used for carrying the charger. The connecting
cable and the charger may be damaged. Wind up the connecting cable and attach
it to the charger.
4.12 Storing
4.12.1 Garden pruner
WARNING
Children are not aware of and cannot assess the dangers of the garden pruner
and can be seriously injured. Remove the battery.
Fit the scabbard so that it completely cov- ers the guide bar.
Transport the garden pruner in the bag sup- plied.
If no bag is supplied with the garden pruner: Secure the special harvester
with lashing
Fit the scabbard so that it completely cov- ers the guide bar.
Store the garden pruner out of the reach of children.
10
0458-694-9821-B
4 Safety Precautions
Dampness can corrode the electrical contacts on the garden pruner and other
metal compo- nents. The garden pruner may be damaged. Remove the battery.
Store the garden pruner in a clean and dry condition.
4.12.2 Battery
WARNING
Children are not aware of and cannot assess the dangers of the battery
Children may be seriously injured. Store the battery out of the reach of chil-
dren.
The battery is not protected against all ambi- ent conditions. If the battery
is exposed to cer- tain ambient conditions, the battery may be irreparably
damaged. Store the battery in a clean and dry condi- tion. Store the battery
in an enclosed space. Store the battery separately from the gar- den pruner.
If the battery is stored in the charger, dis- connect the mains plug and store
the rechargeable battery at a battery charge status between 40 % and 60 % (2
lit green LEDs). Do not store the battery outside of the specified temperature
limits, 19.7.
4.12.3 Charger
WARNING
Children are not aware of and cannot assess the dangers of a charger. Children
can be seri- ously injured or killed. Disconnect the plug from the wall
outlet. Store the charger out of reach of children.
The charger is not protected against all ambi- ent conditions. If the charger
is exposed to certain ambient conditions, the charger may be damaged.
Disconnect the plug from the wall outlet. If the charger is hot: Allow the
charger to cool down. Store the charger in a clean, dry place. Store the
charger in an enclosed room. Do not store the charger outside of the specified
temperature limits, 19.7.
The connecting cable should not be used for carrying the charger or hanging up
the
English
charger. The connecting cable and the charger may be damaged. Hold the charger
by the housing in a secure
grip. Hang the charger on the wall mounting.
4.13 Cleaning, Maintenance and Repair
WARNING
The garden pruner may start unintentionally if the battery is left in place
during cleaning, maintenance or repair operations. There is a risk of serious
injury to people and damage to property. Remove the battery.
Cleaning with harsh cleaning agents, a water jet, or pointed objects can
damage the garden pruner, guide bar, the saw chain, the battery and the
charger. If the garden pruner, guide bar, saw chain, battery or charger are
not cleaned correctly, components may no longer function properly or safety
devices may be rendered inoperative. This can cause serious injury to persons.
Clean the garden pruner, guide bar, saw chain, battery and charger as
described in this user manual.
If the garden pruner, guide bar, saw chain, battery or charger are not
properly serviced, components may no longer function properly or safety
devices may be rendered inopera- tive. There is a risk of serious or fatal
injury. Do not attempt to service or repair the gar- den pruner, battery or
charger yourself. If the garden pruner, battery or the charger require
servicing or repairs: Contact a STIHL servicing dealer for assistance. Service
or repair the guide bar and saw chain as described in this User Manual.
The user may be cut by the sharp cutters while cleaning or servicing the saw
chain. This may result in injury to the user. Wear work gloves made from
resistant material.
0458-694-9821-B
11
English
5 Preparing Garden Pruner for Operation
5.1 Preparing Garden Pruner for Operation
The following steps must be performed before commencing work: Ensure that the
following components are in
safe condition: Garden pruner, 4.6.1. Guide bar, 4.6.2. Saw chain,
4.6.3. Battery, 4.6.4. Charger, 4.6.5. Check the battery, 10.6. Fully
charge the battery, 6.2. Clean the garden pruner, 15.1. Mount the guide bar
and saw chain, 7.1.1. Tension the saw chain, 7.2. Lubricate the saw chain,
7.3. Check the controls, 10.5. If you cannot carry out these steps: Do not use
the garden pruner and contact your STIHL dealer for assistance.
Charging the Battery, LEDs
6.1 Mounting the charger on a wall
The charger can be mounted on a wall.
1
2
3
a
b
d
e
a
e
Preparing Garden Pruner for Operation
recommended temperature ranges, 19.8. The actual charging time may vary from
the charging time indicated. The charging time is indicated at www.stihl.com
/charging-times.
The charging process starts automatically when the mains plug is plugged into
a socket and the battery is inserted into the charger. The charger switches
off automatically when the battery is fully charged.
The battery and the charger warm up during charging.
1
2
5
6
0000-GXX-8803-A0
3
4
Insert the mains plug (5) in a convenient wall outlet (6). The charger (2)
runs a self test. The LED (3) glows green for about 1 second and then red for
about 1 second.
Fit the connecting cable (4). Insert the battery (1) in the guides in the
charger (2) and press it home as far as stop. The LED (3) glows or flashes
green. The bat- tery (1) is being charged. When the LED (3) stops glowing: The
battery (1) is fully charged and can be taken out of the charger (2). If the
charger (2) is no longer being used: Dis- connect the mains plug (5) from the
socket (6).
6.3 Displaying State of Charge
0000-GXX-48384092-A0
Check the following points when mounting the charger on a wall: Use suitable
mounting materials. The charger is level. The following dimensions are
observed: a = at least 100 mm b = 54 mm c = 4.5 mm d = 9 mm e = 2.5
mm
6.2 Charging the Battery
The charging time depends on various factors, e.g. the battery temperature or
the ambient tem- perature. For optimum performance, note the
12
80-100% 60-80% 40-60% 20-40%
0-20%
1 Insert battery. Press the button (1).
The LEDs emit green light for about 5 seconds and indicate the state of
charge. If the LED on the right flashes green: Charge the battery.
0458-694-9821-B
0000-GXX-9341-A1
7 Assembling the Garden Pruner
6.4 LEDs on Garden Pruner
The LEDs can show the state of charge or mal- functions. The LEDs can glow or
flash green or red. The state of charge is indicated when the LEDs glow or
flash green. If the LEDs glow or flash red: Troubleshooting,
18. There is a malfunction in the garden pruner or battery.
6.5 LED on Charger
The LED indicates the operating status of the charger or faults. The LED can
glow or flash green or red. If the LED glows or flashes green, the battery is
being charged. If the LED glows or flashes red: Troubleshoot-
ing, 18. There is a malfunction in charger or battery.
Assembling the Garden Pruner
7.1 Removing and Fitting the Bar and Chain
7.1.1 Removing the bar and chain Switch off the garden pruner and remove the
battery.
2
1
3
Raise the grip (1) of the wingnut (2). Rotate the wingnut (2) counterclockwise
until
the chain sprocket cover (3) can be removed. Remove the chain sprocket cover
(3). Remove the bar and chain.
7.1.2 Mounting the bar and chain The bar and chain combinations that can be
used with the chain sprocket are listed in the specifications, 20.1.
0000-GXX-9342-A0
English
Fit the chain in the bar groove so that the arrows on the tie straps on the
top of the bar point in the direction of rotation.
23
1
Fit the guide bar and chain on the garden pru- ner and check the following
points: Chain drive links are seated in teeth of chain sprocket (1). Peg
(2) is located in guide bar’s slot. Collar stud (3) is located in guide
bar’s slot.
The guide bar may be either way round. The logo on the guide bar may also be
upside down. Tension the chain. Fit the sprocket cover so that it is flush
with
the garden pruner. Rotate the wingnut clockwise until the chain
sprocket cover is firmly seated. Fold down the grip of the wingnut.
7.2 Tensioning the Saw Chain
The saw chain expands or contracts during cut- ting work. Chain tension
changes as a result. Check chain tension regularly during operation and
readjust if necessary. Switch off the garden pruner and remove the
battery.
0000-GXX-9344-A0
0000-GXX-9343-A0
0000-GXX-9345-A0
0458-694-9821-B
Raise the grip of the wingnut. 13
English
Rotate the wingnut two turns counterclock- wise. The wingnut is loose.
WARNING The chain’s cutters are very sharp. There is a
risk of cut injuries. Wear work gloves made of durable mate-
rial. Move guide bar to the left or right until the
following points apply:The drive links on the underside of the bar are still
half visible. Rotate the wingnut clockwise until the chain sprocket cover is
firmly seated. If the chain can still be pulled easily along the bar with two
fingers: The chain is properly ten- sioned. If the drive links on the
underside of the bar hang freely: Readjust chain tension. Fold down the grip
of the wingnut.
7.3 Lubricating the Saw Chain
STIHL Multioil Bio or an equivalent biodegrada- ble multifunctional oil
lubricates and cools the rotating saw chain. Switch off the garden pruner and
remove the
battery. Place the garden pruner on a level surface
with the sprocket cover facing up. Clean the guide bar and saw chain with a
soft
brush or STIHL resin solvent.
1
Removing and Fitting the Battery
8 Removing and Fitting the Battery
8.1 Fitting the Battery
2
1
Push the battery (1) into the battery compart- ment (2) as far as stop. The
battery (1) engages in position with a click.
8.2 Removing the Battery
0000-GXX-9347-A0
0000-GXX-9348-A0
1
2
Depress both locking hooks (1). The battery (2) is unlocked and can be removed.
Switching On and Off
9.1 Switching On the Garden Pru- ner
2
0000-GXX-9346-A1
Apply multifunctional oil in area (1) between guide bar and saw chain.
Fit the battery. Switch on the garden pruner.
Multifunctional oil is evenly distributed over the chain. The saw chain is
lubricated.
1
3
4
Hold the garden pruner firmly with one hand on the grip area (1) of the
control handle wrap your thumb around the control handle.
Hold and control the garden pruner with your other hand on the grip surface
(2).
Depress the lockout lever (3) with your thumb and hold it there.
0000-GXX-9349-A0
14
0458-694-9821-B
10 Checking the Garden Pruner and Battery
Pull the trigger (4) with your index finger and hold it there. The motor
accelerates and the chain rotates. Release the lockout lever (3).
9.2 Switching Off the Garden Pru- ner
Release the trigger. The chain stops rotating.
If the chain continues to rotate: Remove the battery and contact your STIHL
dealer for assistance. The garden pruner is defective.
Checking the Garden Pru- ner and Battery
10.1 Checking the Chain Sprocket
Switch off the garden pruner and remove the battery.
Remove the chain sprocket cover. Remove the bar and chain.
English Install a new guide bar if one of the following
points applies: Guide bar is damaged. Measured bar groove depth is less
than
specified minimum depth, 19.3. Bar groove is pinched or splayed. If you have
any queries: Contact a STIHL servicing dealer for assistance.
10.3 Checking the Saw Chain
Switch off the garden pruner and remove the battery.
1 2
Use a STIHL filing gauge (2) to check the height of the depth gauges (1). The
STIHL fil- ing gauge must match the chain pitch.
If a depth gauge (1) projects from the filing gauge (2): Lower the depth gauge
(1) with a file, 16.1.
0000-GXX-1218-A0
0000-GXX-9350-A0
a
Use a STIHL gauge to check the wear marks on the sprocket.
If wear marks are deeper than a = 0.5 mm: Do not use the garden pruner and
contact your STIHL dealer for assistance. The chain sprocket must be replaced.
10.2 Checking the Guide Bar
Switch off the garden pruner and remove the battery.
Remove the chain and guide bar.
Measure depth of bar groove with scale on STIHL filing gauge.
0000-GXX-1217-A0
1
2
Make sure the service marks (1 to 2) on the cutters are visible.
If one of the service marks is not visible on a cutter: Do not use your saw
chain and contact your STIHL servicing dealer for assistance.
Use a STIHL filing gauge to check that the fil- ing angle is 30° on all
cutters. The STIHL filing gauge must match the chain pitch.
If the filing angle of 30° has not been main- tained: Resharpen the saw chain.
If you have any queries: Contact a STIHL servicing dealer for assistance.
10.4 Checking the Chain Guard
Remove the battery.
0000-GXX-A279-A0
0458-694-9821-B
15
English
WARNING
The chain’s cutters are very sharp. There is a risk of cut injuries. Wear work
gloves made of durable mate- rial.
Swing chain guard upward and let it go. Chain guard springs back to its
original posi- tion.
If the chain guard is stiff or does not spring back to its original position:
Do not use the garden pruner and contact your STIHL dealer for assistance. The
chain guard is defective.
10.5 Checking the controls
Lockout lever and trigger Remove the battery. Attempt to pull the trigger
without depressing
the lockout lever. If the trigger can be pulled: Do not use your
garden pruner and contact a STIHL servicing dealer. The lockout lever is
faulty. Depress the lockout lever and hold it in that position. Press and
release the trigger. If the trigger is stiff or does not spring back to its
idle position: Do not use the garden pruner and contact your STIHL dealer for
assistance. The trigger has a malfunction.
Switching on the garden pruner Insert battery. Depress the lockout lever and
hold it in that
position. Press and hold the trigger.
The saw chain starts running. If 3 LEDs flash red: Remove the battery and
consult a STIHL dealer. There is a malfunction in the garden pruner. Release
the trigger. The saw chain stops running. If the saw chain continues to run:
Remove the battery and contact your STIHL dealer for assistance. The garden
pruner has a malfunction.
10.6 Testing the Battery
Fit the battery. Press button on garden pruner.
The LEDs glow or flash. If the LEDs do not glow or flash: Do not use
the garden pruner or battery and contact your STIHL dealer for assistance.
16
11 Using the Garden Pruner There is a malfunction in the garden pruner or battery.
Using the Garden Pruner
11.1 Holding and Controlling the Garden Pruner
2 1
Hold and control the garden pruner with one hand on the grip area (1) of the
control handle wrap your thumb around the control handle.
Hold and control the garden pruner with your other hand on the grip surface
(2).
11.2 Cutting
Start cutting with the chain running at full speed.
Engage the stop and use it as a fulcrum. Continue cutting until guide bar is
completely
through the branch. Take the weight of the garden pruner at the
end of the cut. Cut one branch at a time. For optimum performance, observe the
recom- mended temperature ranges, 19.8.
12 After Finishing Work
12.1 After Finishing Work
Switch off the garden pruner and remove the battery.
If the garden pruner is wet: Allow the garden pruner to dry.
If the battery is wet or damp: Allow the battery to dry, 19.8.
Clean the garden pruner. Clean the guide bar and saw chain.
0458-694-9821-B
0000-GXX-9352-A0
0000-GXX-9351-A0
Transporting
Push the chain scabbard over the guide bar so that it completely covers the
guide bar.
Clean the battery.
13 Transporting
13.1 Transporting the Garden Pru- ner
Switch off the garden pruner and remove the battery.
Fit the chain scabbard so that it completely covers the guide bar.
Carrying the Garden Pruner Carry the garden pruner with one hand on the
control handle with the guide bar pointing down.
Transporting the Garden Pruner in a Car Transport the garden pruner in the bag
sup-
plied. Secure the bag to prevent it from tipping and
moving. If no bag is supplied with the garden pruner:
Secure the garden pruner so that it cannot tip over or move.
13.2 Transporting the Battery
Switch off the garden pruner and remove the battery.
Check that the battery is in a safe condition. Pack the battery in the bag
supplied. If no bag is supplied with the battery: Pack the
battery in packaging in such a way that it can- not move. Secure the packaging
so that it cannot move.
The battery is subject to the Carriage of Danger- ous Goods regulations. The
battery is classified as UN 3480 (lithium ion batteries) and has been tested
pursuant to UN Manual Tests and Criteria Part III, Subsection 38.3.
The transport regulations can be found at www.stihl.com/safety-data-sheets.
13.3 Transporting the Charger
Disconnect the plug from the wall outlet. Remove the battery. Wind up the
connecting cable and attach it to
the charger. Transporting the charger in a vehicle:
Transport the charger in the bag supplied. Secure the bag to prevent turnover
and
movement. If no bag is supplied with the charger:
Secure the charger to prevent turnover and movement.
0458-694-9821-B
English
14 Storing
14.1 Storing the Garden Pruner
Switch off the garden pruner and remove the battery.
Push the chain scabbard over the guide bar so that it completely covers the
guide bar.
Check the following points when storing the garden pruner: The garden pruner
cannot turn over or move. The garden pruner is out of the reach of children.
The garden pruner is clean and dry. The saw chain is lubricated.
14.2 Storing the Battery
STIHL recommends keeping the battery in a charging state between 40% and 60 %
(2 green LEDs lit). The battery should be stored in such a way
that the following conditions are fulfilled: The battery is out of the reach
of children. The battery is clean and dry. The battery is in an enclosed
space. Battery is stored separately from the garden
pruner. If the battery is stored in the charger, dis-
connect the mains plug and store the rechargeable battery at a battery charge
status between 40 % and 60 % (2 lit green LEDs). Do not store the battery
outside of the specified temperature limits, 19.7.
NOTICE
If the battery is not stored as described in this user manual, the battery may
become deeply discharged and irreparably damaged. Charge a discharged battery
before storing it. STIHL recommends keeping the battery in a charging state
between 40% and 60% (2 lit green LEDs). Store the battery separately from the
gar- den pruner.
14.3 Storing the Charger
Disconnect the mains plug from the power supply.
17
English
1
2 3
0000-GXX-8804-A1
Wind up the connecting cable and attach it to the charger.
Observe the following points when storing the charger: Charger is out of the
reach of children. The charger is clean and dry. Charger is in an enclosed
space. The charger is not suspended from the con- necting cable or the
holder (3) for the con- necting cable. Do not store the charger outside of
the specified temperature limits, 19.7.
Cleaning
15.1 Cleaning the Garden Pruner
Switch off the garden pruner and remove the battery.
Clean the garden pruner with a damp cloth or STIHL resin solvent.
Clean vents with a paintbrush. Remove the chain sprocket cover. Clean the area
around the chain sprocket with
a damp cloth or STIHL resin solvent. Remove foreign objects from the battery
com-
partment and clean the battery compartment with a damp cloth. Clean the
electrical contacts in the battery compartment with a paintbrush or soft
brush. Fit the chain sprocket cover.
15.2 Cleaning the Bar and Chain
Switch off the garden pruner and remove the battery.
Remove the bar and chain.
1
1
0000-GXX-9354-A0 0000-GXX-1219-A0
15 Cleaning
Clean the bar groove (1) with a soft brush or STIHL resin solvent.
Clean the saw chain with a soft brush or STIHL resin solvent.
Mount the bar and chain. Lubricate the saw chain.
15.3 Cleaning the Battery
Clean the battery with a damp cloth.
15.4 Cleaning the Charger
Disconnect the mains plug from the power supply.
Clean the charger with a damp cloth. Clean the charger’s electrical contacts
with a
paintbrush or a soft brush.
Maintenance
16.1 Sharpening the Saw Chain
Correctly sharpening saw chains requires a lot of practice. STIHL files, STIHL
filing aids, STIHL sharpeners and the brochure “Sharpening STIHL Saw Chains”
help you achieve the right results. To obtain the brochure visit
http://www.stihl.com/ sharpening-brochure. STIHL recommends you have saw
chains resharpened by a STIHL servicing dealer.
WARNING The chain’s cutters are very sharp. There is a
risk of cut injuries. Wear work gloves made of durable mate-
rial.
File each cutter with a round file so that the following points are observed:
Round file matches the chain pitch. File from the inside to the outside of
the cut- ter. Hold the file at right angle to the guide bar. Maintain a
filing angle of 30°.
18
0458-694-9821-B
17 Repairing
English
File down the depth gauges with a flat file so that they are level with the
STIHL filing gauge and parallel to the service mark. The STIHL fil- ing gauge
must match the chain pitch.
If you have any queries: Contact your STIHL servicing dealer for assistance.
0000-GXX-1220-A1
guide bar or saw chain, and contact your STIHL servicing dealer for assistance. If the battery has a malfunction or is damaged: Replace the battery. If the charger has a malfunction or is dam- aged: Replace the charger. If the connecting cable has a malfunction or is damaged: Do not use the charger and have connecting cable replaced by a STIHL servic- ing dealer.
17 Repairing
17.1 Repairing the Garden Pruner, Battery and Charger
The garden pruner, guide bar, saw chain, battery and charger are not user
serviceable. If the garden pruner, guide bar or saw chain
are damaged: Do not use your garden pruner,
Troubleshooting
18.1 Troubleshooting the Garden Pruner or Battery
Fault Garden pruner does not run when switched on.
LEDs on gar- den pruner 1 LED flashes green.
Cause State of charge of the battery is too low.
Remedy Charge the battery.
1 LED emits red light. 3 LEDs flash red.
3 LEDs light up red. 4 LEDs flash red.
The battery is too warm or too cold.
Remove the battery. Allow the battery to cool down or warm
up.
There is a malfunction Remove battery and reinsert it. in the garden pruner.
Switching on the garden pruner
If 3 LEDs continue to flash red: Do not use the garden pruner and contact your
STIHL dealer for assistance.
Garden pruner is too Remove the battery.
hot.
Allow garden pruner to cool down.
There is a fault in the battery.
Remove the battery. Clean electrical contacts in the battery
compartment. Insert battery. Switching on the garden pruner If 4 LEDs continue
to flash red: Do not
use the battery; contact a STIHL author- ized dealer.
No electrical contact between garden pru- ner and battery.
Remove the battery. Clean electrical contacts in the battery
compartment. Insert battery.
0458-694-9821-B
19
English
Specifications
Fault Garden pruner cuts out during operation. Cutting perform- ance of garden
pruner deterio- rates.
Garden pruner runtime is too short.
LEDs on gar- den pruner 3 LEDs light up red. 1 LED flashes green.
Cause
Remedy
Garden pruner or bat- Allow the garden pruner or battery to dry,
tery damp.
19.8.
The saw chain is jam- Remove the battery.
med.
Clean the garden pruner, 15.1.
Garden pruner is too Remove the battery.
hot.
Allow garden pruner to cool down.
There is an electrical Remove battery and reinsert it.
fault.
Switching on the garden pruner
State of charge of the Charge the battery. battery is too low.
The saw chain has not been correctly sharpened.
Sharpen chain as specified.
The saw chain is over-tensioned.
Tension the saw chain as specified.
Insufficient chain lubri- Lubricate the saw chain. cation.
The battery is not fully Fully charge the battery. charged.
The battery service Replace the battery. life has been excee- ded.
18.2 Troubleshooting the Charger
Fault
LED on Charger
Cause
Remedy
Battery not being One LED glows The battery is too
charged.
red.
warm or too cold.
Leave battery inserted in charger. Charging starts automatically as soon as the permitted temperature range is reached.
The LED flashes red.
No electrical contact Remove the battery.
between charger and Clean contacts on charger.
battery.
Insert battery.
There is a malfunction Do not use the charger and contact your
in the charger.
STIHL dealer for assistance.
There is a fault in the Do not use the battery. Consult a STIHL
battery.
dealer.
The charger does not run a self test.
The LED
Electrical contact to
glows green for charger was briefly
about 1 second interrupted.
and then red
for about 1 sec-
ond.
Disconnect the mains plug from the power supply.
Wait for 1 minute. Insert the mains plug in a wall outlet.
19 Specifications
For battery life see www.stihl.com/battery-life.
19.1 STIHL GTA 26 Garden Pruner
Approved battery: STIHL AS Weight without battery, guide bar and saw
chain 1.2 kg
19.2 Chain Sprockets
The following chain sprockets may be used: 6-tooth for 1/4″ P
Maximum chain speed: 8.0 m/s
20
0458-694-9821-B
19 Specifications
19.3 Minimum groove depth of guide bars
The mininum groove depth depends on the pitch of the guide bar. 1/4″ P 4 mm
19.4 STIHL AS Battery
Battery Technology: Lithium-ion Voltage: 10.8 V Capacity in Ah: see
rating label Energy content in Wh: see rating label Weight in kg: see
rating label
19.5 STIHL AL 1 Charger
Rated voltage: see rating pate Frequency: see rating plate Rated power:
see rating plate Charging current: see rating plate Maximum energy content
of approved STIHL
AS battery: 12.5 Ah
For charging times see www.stihl.com/chargingtimes.
19.6 Extension Cords
If an extension cord is used, the cross sectional area of its conductors must
meet the following minimum requirements depending on the line voltage and
length of the extension cord:
If rated voltage on the rating label is 220V to 240V: Cord length up to 20
m: AWG 15 / 1.5 mm² Cord length 20 m up to 50 m: AWG 13 /
2.5 mm²
If rated voltage on the rating label is 100V to 127V: Cord length up to 10
m: AWG 14 / 2.0 mm² Cord length 10 m up to 30 m: AWG 12 /
3.5 mm²
19.7 Temperature limits
WARNING
The battery is not protected against all ambi- ent conditions. If the battery
is exposed to cer- tain environmental conditions, it may catch fire or
explode. This may result in serious injury to people and damage to property.
Do not charge the battery below -20°C or above 50°C. Do not use the garden
pruner, battery or charger below -20 °C or above +50 °C. Do not store the
garden pruner, battery or charger below -20°C or above +70°C.
0458-694-9821-B
English
19.8 Recommended temperature ranges
For optimum performance of the garden pruner, batteries and charger, observe
the following tem- perature ranges: Charging: 5°C to 40°C Use: – 10 °C to
- 40 °C Storage: – 20 °C to + 50 °C
If the battery is charged, used or stored outside the recommended temperature ranges, perform- ance may be reduced.
If the battery is wet or damp, allow the battery to dry for at least 48 h between 15°C and 50°C and with less than 70% humidity. Higher humidity may extend the drying time.
19.9 Sound and vibration values
The K value for the sound pressure level is 2 dB(A). The K value for the sound power level is 2 dB(A). The K value for the vibration level is 2 m/s².
STIHL recommends wearing hearing protection. Sound pressure level LpA measured according
to EN 6284141: 77 dB(A) Sound power level LwA measured according to
EN 62841-4-1: 86 dB(A) Vibration level ahv measured according to
EN 62841-4-1: Control handle: 2.8 m/s² Grip: 2.9 m/s.
The sound and vibration values indicated were measured according to a standardized test method and can be used as a basis for compar- ing electric power tools. The actual sound and vibration levels may vary from the values indica- ted, depending on the type of application. The sound and vibration levels indicated can be used for an initial estimate of the sound and vibration stress. The actual sound and vibration stress has to be estimated. The times can be taken into account in the estimate when the electric power tool is switched off and also when it is switched on but running without any load.
For information on compliance with the Vibration Directive 2002/44/EC, see www.stihl.com/vib.
19.10 REACH
REACH is an EC regulation and stands for the Registration, Evaluation, Authorisation and Restriction of Chemical substances.
For information on compliance with the REACH regulation see www.stihl.com/reach.
21
English
20 Bar and Chain Combinations
20.1 STIHL GTA 26 Garden Pruner
20 Bar and Chain Combinations
Pitch
Drive link Length gauge/groove width
Guide bar
Nose sprocket teeth
Number of Saw chain drive links
1/4″ P
1.1 mm
10 cm
Light
28
71 PM3 (Type 3670)
The cutting length of a guide bar depends on the garden pruner model being used and the saw chain. Actual cutting length may be less than the specified length
21 Spare Parts and Accesso- ries
21.1
Spare parts and accessories
These symbols indicate original STIHL spare parts and original STIHL acces-
sories.
STIHL recommends the use of original STIHL spare parts and accessories.
Despite ongoing market observation, STIHL is unable to judge the reliability, safety and suitabil- ity of other manufacturers’ spare parts and accessories; accordingly, STIHL cannot warrant for the use of those parts.
Original STIHL spare parts and original STIHL accessories are available from STIHL dealers.
type: cordless garden pruner Manufacturer’s brand: STIHL series: GTA 26
Serial number: GA01 Accessories: GTA 26 Extension
(GA01 820 5000)
conforms to the relevant provisions of Directives 2011/65/EU, 2006/42/EC,
2014/30/EU and 2000/14/EC and has been developed and manu- factured in
compliance with the following stand- ards in the versions valid on the date of
produc- tion: EN 55014-1, EN 55014-2 and EN 62841-1.
The EC type examination test was carried out pursuant to Directive 2006/42/EC,
Art. 12.3(b) at: VDE Prüf- u. Zertifizierungsinstitut (NB 0366), Merianstraße
28, 63069 Offenbach, Germany Certification number: 40050017
22 Disposal
22.1 Disposing of Garden Pruner, Battery and Charger
Contact the local authorities or your STIHL dealer for information on
disposal.
Improper disposal can be harmful to health and pollute the environment. Take
STIHL products including packaging to a
suitable collection point for recycling in accord- ance with local
regulations. Do not dispose with domestic waste.
The measured and guaranteed equivalent sound power level has been determined
in accordance with Directive 2000/14/EC, Annex V. Measured sound power
level: 88 dB(A) Guaranteed sound power level: 90 dB(A)
The technical documents are stored at ANDREAS STIHL AG & Co. KG Produktzulas-
sung.
The year of manufacture, country of manufacture and serial number are
indicated on the garden pruner.
Waiblingen, 2023-06-15
23 EC Declaration of Con- formity
ANDREAS STIHL AG & Co. KG
23.1 STIHL GTA 26 Cordless Pru- ner
ANDREAS STIHL AG & Co. KG Badstraße 115 D-71336 Waiblingen
pp
Robert Olma, Vice President, Regulatory Affairs & Global Governmental
Relations
Germany
declare under our sole responsibility that
22
0458-694-9821-B
24 UKCA Declaration of Conformity
24 UKCA Declaration of Con- formity
24.1 STIHL GTA 26 Cordless Pru- ner
ANDREAS STIHL AG & Co. KG Badstraße 115 D-71336 Waiblingen
Germany
declare under our sole responsibility that type: cordless garden pruner
Manufacturer’s brand: STIHL series: GTA 26 Serial number: GA01
Accessories: GTA 26 Extension
(GA01 820 5000)
conforms to the relevant provisions of UK regula- tions The Restriction of the
Use of Certain Haz- ardous Substances in Electrical and Electronic Equipment
Regulations 2012, Supply of Machi- nery (Safety) Regulations 2008,
Electromagnetic Compatibility Regulations 2016 and Noise Emis- sion in the
Environment by Equipment for use Outdoors Regulations 2001 and has been manu-
factured in compliance with the following stand- ards in the versions valid on
the date of produc- tion: EN 550141, EN 550142, and EN 62841-1.
The type examination was carried out by: Inter- tek Testing & Certification
Ltd, Academy Place, 1-9 Brook Street, Brentwood, Essex, CM14 5NQ, United
Kingdom Certification number: UK-MCR-0043
The measured and guaranteed sound power lev- els have been determined in
accordance with UK regulations Noise Emission in the Environment by Equipment
for use Outdoors Regulations 2001, Schedule 8. Measured sound power level:
88 dB(A) Guaranteed sound power level: 90 dB(A)
The technical documents are stored at ANDREAS STIHL AG & Co. KG.
The year of manufacture, country of manufacture and serial number are
indicated on the garden pruner.
Waiblingen, 15.06.2023
ANDREAS STIHL AG & Co. KG
English
pp
Robert Olma, Vice President, Regulatory Affairs & Global Governmental
Relations
25 Addresses
www.stihl.com
26 General Power Tool Safety Warnings
26.1 Introduction
This chapter reproduces the pre-formulated, gen- eral safety precautions
specified in the IEC 62841 standard for hand-held motor-oper- ated electric
tools.
STIHL is obliged to publish these texts.
The safety precautions and warnings on avoiding an electric shock given under
“Electrical Safety” do not apply to STIHL cordless products.
WARNING
Read all safety warnings, instructions, illustra- tions and specifications
provided with this power tool. Failure to follow all instructions lis- ted
below may result in electric shock, fire and/or serious injury. Save all
warnings and instructions for future reference.
The term “electric power tool” in the safety warn- ings refers to mains-
operated (corded) power tools or battery-operated (cordless) power tools.
26.2 Work area safety
a) Keep work area clean and well lit. Cluttered or dark areas invite
accidents.
b) Do not operate power tools in explosive atmospheres, such as in the
presence of flammable liquids, gases or dust. Power tools create sparks which
may ignite the dust or fumes.
c) Keep children and bystanders away while operating a power tool.
Distractions can cause you to lose control.
26.3 Electrical safety
a) Power tool plugs must match the outlet. Never modify the plug in any way.
Do not use any adapter plugs with earthed (groun- ded) power tools.Unmodified
plugs and
0458-694-9821-B
23
English
matching outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces, such as pipes,
radiators, ranges and refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet conditions. Water entering a power
tool will increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord for carrying, pulling or
unplugging the power tool. Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entan- gled cords increase the risk of electric
shock.
e) When operating a power tool outdoors, use an extension cord suitable for
outdoor use. Use of a cord suitable for outdoor use reduces the risk of
electric shock.
f) If operating a power tool in a damp location is unavoidable, use a residual
current device (RCD) protected supply. Use of an RCD reduces the risk of
electric shock.
26.4 Personal safety
a) Stay alert, watch what you are doing and use common sense when operating a
power tool. Do not use a power tool while you are tired or under the influence
of drugs, alcohol or medication. A moment of inattention while operating power
tools may result in serious personal injury.
b) Use personal protective equipment. Always wear eye protection. Protective
equipment such as a dust mask, non-skid safety shoes, hard hat or hearing
protection used for appropriate conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure the switch is in the off-position
before connecting to power source and/or battery pack, picking up or carrying
the tool. Carrying power tools with your finger on the switch or energising
power tools that have the switch on invites accidents.
d) Remove any adjusting key or wrench before turning the power tool on. A
wrench or a key left attached to a rotating part of the power tool may result
in personal injury.
e) Do not overreach. Keep proper footing and balance at all times. This
enables better con- trol of the power tool in unexpected situa- tions.
24
26 General Power Tool Safety Warnings
f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair and
clothing away from moving parts. Loose clothes, jewellery or long hair can be
caught in moving parts.
g) If devices are provided for the connection of dust extraction and
collection facillities, ensure these are connected and properly used. Use of
dust collection can reduce dustrelated hazards.
h) Do not let familiarity gained from frequent use of tools allow you to
become complacent and ignore tool safety principles. A careless action can
cause severe injury within a frac- tion of a second.
26.5 Power tool use and care
a) Do not force the power tool. Use the correct power tool for your
application. The correct power tool will do the job better and safer at the
rate for which it was designed.
b) Do not use the power tool if the switch does not turn it on and off. Any
power tool that cannot be controlled with the switch is dan- gerous and must
be repaired.
c) Disconnect the plug from the power source and/or remove the battery pack,
if detacha- ble, from the power tool before making any adjustments, changing
accessories, or stor- ing power tools. Such preventive safety measures reduce
the risk of starting the power tool accidentally.
d) Store idle power tools out of the reach of children and do not allow
persons unfamiliar with the power tool or these instructions to operate the
power tool. Power tools are dan- gerous in the hands of untrained users.
e) Maintain power tools and accessories. Check for misalignment or binding of
moving parts, breakage of parts and any other condi- tion that may affect the
power tool’s opera- tion. If damaged, have the power tool repaired before use.
Many accidents are caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly maintained cutting tools with
sharp cutting edges are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc. in accordance with these
instructions, taking into account the working conditions and the work to be
performed. Use of the power tool for operations different from those
0458-694-9821-B
26 General Power Tool Safety Warnings
intended could result in a hazardous situa- tion.
h) Keep handles and grasping surfaces dry, clean and free from oil and grease.
Slippery handles and grasping surfaces do not allow for safe handling and
control of the tool in unexpected situations.
26.6 Battery tool use and care
a) Recharge only with the charger specified by the manufacturer. A charger
that is suitable for one type of battery pack may create a risk of fire when
used with another battery pack.
b) Use power tools only with specifically desig- nated battery packs. Use of
any other battery packs may create a risk of injury and fire.
c) When battery pack is not in use, keep it away from other metal objects,
like paper clips, coins, keys, nails, screws or other small metal objects,
that can make a connec- tion from one terminal to another. Shorting the
battery terminals together may cause burns or a fire.
d) Under abusive conditions, liquid may be ejected from the battery; avoid
contact. If contact accidentally occurs, flush with water. If liquid contacts
eyes, additionally seek medical help. Liquid ejected from the battery may
cause irritation or burns.
e) Do not use a battery pack or tool that is dam- aged or modified. Damaged or
modified bat- teries may exhibit unpredictable behaviour resulting in fire,
explosion or risk of injury.
f) Do not expose a battery pack or tool to fire or excessive temperature.
Exposure to fire or temperature above 130 °C may cause explo- sion.
g) Follow all charging instructions and do not charge the battery pack or tool
outside the temperature range specified in the instruc- tions. Charging
improperly or at tempera- tures outside the specified range may dam- age the
battery and increase the risk of fire.
26.7 Service
a) Have your power tool serviced by a qualified repair person using only
identical replace- ment parts. This will ensure that the safety of the power
tool is maintained.
b) Never service damaged battery packs. Serv- ice of battery packs should only
be per- formed by the manufacturer or authorized service providers.
English
26.8 Garden Pruner Safety Warn- ings
General Garden Pruner Safety Warnings a) Keep all parts of your body away from
the
saw chain when the garden pruner is operat- ing. Before you start the garden
pruner, make sure the saw chain does not touch anything. A moment of
inattention while operating garden pruner may cause entan- glement of your
clothing or body with the saw chain.
b) Always hold the garden pruner with one hand on the rear handle and the
other hand on the auxiliary handle.
c) Hold the garden pruner by insulated gripping surfaces only, because the saw
chain may contact hidden wiring or its own cord. Saw chains contacting a
“live” wire may make exposed metal parts of the garden pruner “live” and could
give the operator an electric shock.
d) Wear eye protection. Further protective equipment for hearing, head, hands,
legs and feet is recommended. Adequate protec- tive equipment will reduce
personal injury from flying debris or accidental contact with the saw chain.
e) Do not operate a garden pruner on a ladder, from a rooftop, or any unstable
support. Operation of a garden pruner in this manner could result in serious
personal injury.
f) Always keep proper footing and operate the garden pruner only when standing
on a fixed, secure and level surface. Slippery or unsta- ble surfaces may
cause a loss of balance or control of the garden pruner.
g) When cutting a limb that is under tension be alert for spring back. When
the tension in the wood fibers is released the spring loaded limb may strike
the operator and/or throw the garden pruner out of control.
h) Use extreme caution when cutting brush and saplings. The slender material
may catch the saw chain and be whipped toward you or pull you off balance.
i) Carry the garden pruner with the garden pru- ner switched off and away from
your body. When transporting or storing the garden pru- ner, always fit the
guide bar cover. Proper handling of the garden pruner will reduce the
likelihood of accidental contact with the mov- ing saw chain.
0458-694-9821-B
25
Traducción del manual de instrucciones original 0000008739_016_E
Impreso en papel blanqueado sin cloro. El papel es reciclable.
español
j) Follow the instructions for lubricating, chain tensioning and changing the
bar and chain. Improperly tensioned or lubricated garden pruner may either
break or increase the chance for injury.
k) Cut wood only. Do not use garden pruner for purposes not intended. For
example: do not use garden pruner for cutting metal, plastic, masonry or non-
wood building materials. Use of the garden pruner for operations dif- ferent
than intended could result in a hazard- ous situation.
l) This garden pruner is not intended for tree felling. Use of the garden
pruner for opera- tions different than intended could result in serious injury
to the operator or bystanders.
m) Follow all instructions when clearing jammed material, storing or servicing
the garden pru- ner. Make sure the switch is off and the bat- tery pack is
removed. Unexpected actuation of the garden pruner while clearing jammed
material or servicing may result in serious personal injury.
References
- STIHL Batteries: Running Times & Charging Times | STIHL | STIHL
- STIHL Batteries: Running Times & Charging Times | STIHL | STIHL
- STIHL Safety Data Sheets: Complete Overview | STIHL
- Information on Physical Agents Directive Vibration | STIHL | STIHL
- Сертификаты соответствия | STIHL
- STIHL Batteries: Running Times & Charging Times | STIHL | STIHL
- STIHL Batteries: Running Times & Charging Times | STIHL | STIHL
- STIHL Safety Data Sheets: Complete Overview | STIHL
- Сертификаты соответствия | STIHL
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>