TaoTronics Duo Free+ User Manual

: June 8, 2024
: TaoTronics

Table of Contents

Product specification
Instructions
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Duo Free True Wireless Bluetooth Headset

Product specification

Product number – Duo Free
Drive unit – Moving coil
Bluetooth version – Roda chip AB1526P/5.0
Audio decoding – SBC
Charging performance of the charging compartment – 5V/360mA
Endurance – About 3 hours
The number of times the charging compartment recharges the headset – About 5 times
Charging time – Approximately 1 hour for earphones / Approximately 2 hours for charging compartment
Weight – Single earphone 5.2g / charging compartment about 56.5g

Instructions

Bluetooth pairing
Pair your phone with both ears (the right ear is the main ear)
1. Put both ears into the charging compartment, take out the right ear, and wait for the red and blue lights to flash on the right ear
2. Turn on the Bluetooth pairing “TaoTronics Duo Free”
3. Repeat the above actions to pair the left ear headset “TaoTronics Duo Free L”
Two, single-ear pairing
1. Just take out the left ear, search for “TaoTronics Duo Free L” and click connect to use it, then Take out the right ear once and connect it back into binaural mode
2. Just take out the right ear, search for “TaoTronics Duo Free” and click connect to use it, again Take out the left ear and connect it back into binaural mode
3. Both ears→left single ear, put the right ear back into the charging compartment and cover it, press and hold the left ear until the red and blue light flashes
After the number, re-pair can be used in one ear
1. Binaural → right single ear, put the left ear back, you can use single ear without clicking to re-pair
Note: The volume cannot be adjusted in monaural mode
Instructions
1. Switch on/off: turn on/off the charging box
2. Adjust the volume level: tap the left ear 1 time (down)/right ear 1 time (up) (The volume cannot be adjusted in one ear)
3. Switch tracks: Tap the left ear 3 times (top)/right ear 3 times (down) (the track cannot be adjusted for one ear)
4. Play/pause, answer/hang up: tap the left/right ear twice
5. Voice assistant, refused to answer the call: long press the left/right ear for 2-3 seconds
Reset method
1. First delete all Duo Free links on the phone.
2. Take out the left earphone, put the right side in the charging box, don’t take it out, cover the charging box, When the red and blue lights on the earphone are flashing alternately, click the LOGO three times quickly, and a purple light appears Flashes twice, indicating that the left side is cleared. At this time, put the left earphone into the charging box.
3. Take out the right earphone and cover the charging box. When the red and blue lights on the right earphone flash alternately, quickly Click on the LOGO for three times, and the purple light on the right earphone will flash twice, indicating that the right side After the removal is successful, put the right earphone into the charging box and close the lid.
4. Open the charging box again, wait a few seconds and see that both the left and right ears enter the flashing state of red and blue lights.When the left and right earphones quickly click the LOGO three times, the purple light flashes 2 times, then The left and right earphones will be paired automatically. When the red and blue lights on the right earphone are flashing, you can turn on the hand
Bluetooth connection and pairing. Note: Single ear cannot be reset, and both sides need to be reset at the same time