TOYOTA QC2.0 USB Fast Charger Owner’s Manual

June 10, 2024
Toyota

TOYOTA QC2.0 USB Fast Charger

TOYOTA QC2.0 USB Fast Charger

Safety Instruction

  • The product must only be used for its intended purpose and in accordance with these instructions. All other use is considered to be unsuitable.
  • The manufacturer cannot accept liability for personal injury or material damage resulting from improper use of the product.
  • Observe the following precautions. Failure to do so may result in the possibility of fire, equipment failure or damage, or burns due to heat.
  • Do not expose the charger to moisture and liquid.
  • Do not used for data transfer since it is only for battery charging purposes.
  • Do not used with over-power device such as laptop and others USB device beside smartphone and tablet.
  • Do not disassemble, modify or remove the USB Charger.
  • Do not use the USB charger if it has been damaged.

Product Description

TOYOTA QC2.0 USB Fast Charger 1

A portable device, such as a smartphone or tablet, can be charged by plugin USB cable at the designated port. To achieve Fast Charge mode, the portable device must be compatible with Fast Charge protocol and Fast Charge cable. Charging time is varies depending on smartphone/tablet battery capacity and Fast Charge protocol.

Input Voltage DC9V~16V
Port A Output
Port C Output
Led Indicator Green : Idle/ Complete charging

Red    : Charging

Protection

| Short Circuit
Over Temperature
Over Load
Protocol| DCP,QC2.0,QC3.0,FCP,SCP,AFC,MTK PE,SFCP,PD2.0,PD3.0 {PPS)

User Instruction

  • The USB Charger will turn ON when the user start the vehicle engine. The LED indicator will turn Green meaning it is in standby mode.
  • Connect USB cable to USB charger port and the other end of USB cable connect with portable device.
  • The LED indicator light will change to RED once the charging begins. After the charging is complete, the RED light will change to Green.
  • For supporting smartphone, the screen will display “Fast Charging/Quick Charging”.
Operation LED Indication
Engine OFF OFF
1st Push start Green LED ON
2nd Push start Green LED ON

Engine ON (After break + 1 push

start)

| Idle|

Green LED ON

Complete Charging
Charging| Red LED ON

Precaution

  • Do not spill liquids (i. e. water, drinks, etc.) on the USB Charger.
  • Misuse or excessive force may cause product damage.
  • While charging, the USB charger and the portable device will become warm. This is not a malfunction. If a portable device becomes warm while charging and charging stops due to the protection function of the portable device, wait until the portable device cools down and charge it again.

Notice

  • Charging will be suspended when vehicle engine is OFF. Charging will resume after engine ON.
  • In the following situations, the USB charger may not operate correctly:
    • When a portable device is not centred on the charging area
    • When a portable device becomes hot while charging

Please read this manual for proper operation and keep it for future reference.

Documents / Resources

| TOYOTA QC2.0 USB Fast Charger [pdf] Owner's Manual
QC2.0, QC2.0 USB Fast Charger, USB Fast Charger, Fast Charger, Charger
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals