CHEFMASTER HEA773 Single Ribbed Contact Grill Instruction Manual
- June 4, 2024
- ChefMaster
Table of Contents
Chefmaster Contact Grill
Instruction Manual
Models
HEA773 – Single Ribbed/Ribbed
HEA750 – Large Ribbed/Flat
HEA787 – Large Ribbed/Ribbed
HEA788 – Large Flat/Flat
HEA751 – Double Ribbed/Flat
HEA789 – Double Ribbed/Ribbed
HEA790 – Double Flat/Flat
Thank you for purchasing your Chefmaster Contact Grill. To make full use of the product please read this manual carefully before using the product and keep it safe for future reference.
Safety Tips
- If you find any damage when the product is unpacked, contact your Chefmaster supplier within 24 hours of receipt of goods
- Always position on a flat stable surface
- Repairs should always be carried out by a qualified technician
- Do not use this product outside
- Clean immediately if oil/fat comes into contact with plastic components
- Do not carry when hot
- Always switch off and unplug the unit before cleaning
- Move by holding the product by the base
- Always store flat and do not store products on top of it
- If the power cord becomes damaged it must be replaced by a qualified technician
- This product is not designed to be used by persons with reduced physical or mental capabilities, lack of experience or knowledge, unless they are given suitable supervision, this includes children.
Pack Contents
- 1 x Chefmaster Contact Grill
- 1 x Scrapper
Before Use
- Remove all packaging including all protective plastic, from your Chefmaster Contact Grill
- Position on a flat surface
- Ensure the drip tray is correctly positioned
- Plug your Chefmaster Contact Grill into the mains
- The grill will now be ready to turn on
Important Note : The Double Grills HEA751, HEA790 & HEA789 come with two plugs and separate control panels. Please DO NOT connect the plugs to the same socket with multi socket adaptor.
Operation
- Ensure the grill is plugged in and the power is on
- Select the temperature you require, the yellow heating indicator light will be on. It will take about 8 minutes to reach 250c
- Once the grill has reached the desired temperature the yellow heating light will go out and the green power light will come on
- Put a small amount of oil on the lower plate, place food on the lower plate, close the grill, and cook
Note: This unit has a reset button on the base. If the temperature of the
unit is too high, it will cut out. Please wait for the unit to cool down,
press the reset button and the unit will function as normal.
Cleaning & Maintenance
- Before cleaning disconnect the grill from the electricity supply. Whilst the plates are still warm wash them with warm soapy water and rinse them with clean water
- Remove the drip tray and clean in warm soapy water
- All other parts of the grill can be cleaned with a damp cloth
- DO NOT submerge the grill in water or use water sprays to clean it
- Always clean your Chefmaster Contact Grill daily, this will stop grease building up and becoming difficult to clean.
- Take care using the scraper as it can damage the grill surface
Troubleshooting
Fault | Possible Cause | Solution |
---|
The plates are not heating when the power and
heating indicators are both on| Temperature controller maybe broken
At least one of heating wires may have burnt
out| Contact your Chefmaster distributor Contact your Chefmaster distributor
When the power is on and temperature controller is switched and heating
indicator is on and
temperature can be not controlled| The thermostat may need to be replaced|
Contact your Chefmaster distributor
Indicator is not on when the power is on and the
grill is heating| Power indicator light may need to be replaced| Contact your
Chefmaster distributor
The power is switched on put the unit is not heating| The fuse may need to be
replaced| Change the fuse
Transportation and Storage
Please handle your contact grill with care to prevent any damage to the
unit and internal parts. The contact grill should be stored somewhere which is
ventilation and non-corrosive gas. Do not store any flammable objects near the
equipment.
Technical Information
HEA773 – Small Single Contact Grill
Voltage ~230v 50/60Hz
Power 1.8Kw
Weight 14kg
Plate Type Ribbed & Lower
Dimensions 290 x 305 x 210
HEA750 – Large Single Contact Grill Ribbed/Flat
HEA787 – Large Single Contact Grill Ribbed/Ribbed
HEA788 – Large Single Contact Grill Flat/Flat
Voltage ~230v 50/60Hz
Power 2.2Kw
Weight 18kg
Plate Type Ribbed Top, Smooth Lower
Dimensions 410 x 305 x 210
HEA751 – Double Contact Grill Ribbed/Flat
HEA789 – Double Contact Grill Ribbed/Ribbed
HEA790 – Double Contact Grill Flat/Flat
Voltage ~230v 50/60Hz
Power 2 x 1.8Kw
Weight 28kg
Plate Type Ribbed Top, Smooth Lower
Dimensions 570 x 305 x 210
- Chefmaster Contact Grills are supplied with a 3-pin plug and lead with a 13 amp fuse
- Appliance must be earthed
- If in doubt contact a qualified electrician or your Chefmaster distributor
Disposal
Under WEEE regulations this product must not be disposed of as household
waste. To prevent damage to the environment and humans this product must be
disposed of in an approved and environmentally friendly recycling process. For
more information on how to dispose of this correctly please contact your
Chefmaster distributor or local authority responsible for waste disposal.
Compliance
All Chefmaster parts and products have undergone a stringent testing process to ensure that comply with all European standards and specifications. All Chefmaster products carry the CE approval symbol.