BEMIS 1B5991400 Assist Premium Toilet Seat with Built In Support Arms Instruction Manual
- June 17, 2024
- BEMIS
Table of Contents
BEMIS 1B5991400 Assist Premium Toilet Seat with Built In Support Arms
Instruction Manual
ASSIST INSTALLATION
STANDARD HEIGHT PREMIUM TOILET SEAT + SUPPORT ARMS
Tool Needed
1/2″ (13 mm)
SCAN FOR INSTALLATION VIDEO
Hardware Kit Includes
Place seat on firm, flat surface. Push each arm down until they snap into place.
Open hinge caps. Insert (A) through (B) into hinges.
Close hinge caps. Twist or slide (C) onto (A) all the way up.
Place seat on bowl.
Finger tighten (D) to the underside of the bowl.
Adjust seat front to back for proper fit.
Holding seat centered on bowl, tighten (D) until lower portions SNAP OFF to
prevent over-tightening and will NEVER LOOSEN.
STAY·TITE™
Remove nut with any 1/2″ wrench
LIMITED WARRANTY
This product is guaranteed against defects in material and workmanship for one year from date of purchase. If this product is defective, the exclusive remedy will be a replacement product of equal value. Expenses incurred during removal or installation are excluded.
CARE & CLEANING
Clean only with mild cleaners using a soft, damp cloth, & towel dry
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>