ARERG 3D Illusion Star Wars Night Light User Guide
- June 1, 2024
- ARERG
Table of Contents
3D Lamp User Guide
Please read all instructions and warnings before use.
These instructions are for your safety and to ensure you obtain the best
performance from this product. Save these instructions for future reference.
Product Specifications:
- Input Voltage: 4.5V-5V
- Power Input: USB Cable (included) or 3 x AA Batteries (not included)
- Output Power: 2-2.5W
Safety Instructions
- This product is for indoor use only.
- Before inserting the acrylic design into the base, please remove the yellow paper from one side.
- Do not touch acrylic plate surface with your fingers as this will leave marks and may affect the 3D illusion.
- To insert batteries, slide off battery cover, insert new batteries and replace cover.
- Rechargeable batteries are to be removed from the product before being recharged and should be recharged under adult supervision.
- Do not mix standard and rechargeable batteries or new and old batteries.
- Always insert batteries with the correct polarity.
- Exhausted batteries are to be removed from the product immediately.
- Always sercn the lamp off overnight or if left unattended.
How to Use
- Remove the yellow paper from one side of the acrylic plate.
- Place acrylic plate in base.
- Plug in USB cable to power supply/computer or insert batteries.
- Press the power button to turn on.
- Press the power button to change colour.Each time the power button is pressed, the lamp will change colour. There are 7 colours (red,green,blue, yellow,cyan,purple and white)plus an alternating option.
- Press the power button for 2 seconds to turn lamp off.
- Pull the plastic sheet under the bottom of remote controller before using remote function.
Cleaning Instructions
- Wipe acrylic with a clean soft cloth. Do not use abrasive cleaners as will damage surface.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>