Avantree Low Latency Wireless Headphones Audition Pro User Manual

: June 8, 2024
: Avantree

Table of Contents

Avantree Low Latency Wireless Headphones Audition Pro User Manual
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Avantree Low Latency Wireless Headphones Audition Pro User Manual

www.avantree.com

1. Headset overview

Headset overview

NOTE: All accessories are also available on avantree.com

2. Connect

Turn on: Press and hold the MFB for 1 second, The LED flashes blue and you will hear: “Welcome to Avantree”.

Turn off: Press and hold the MFB for 2 seconds, The LED flashes red and you will hear: “Goodbye”.

2.1 Connect with mobile phone

The first time you power on your headphones the pairing process begins.

STEP 1 While the headphones LEDs are flashing red and blue alternately, activate Bluetooth® on your phone and set it to search for new devices.

iPhone® Settings > Bluetooth > On*
Android ™ Settings > Bluetooth: On > Scan for devices*
NOTE *Menus may vary by device.

STEP 2 Select “Avantree Audition Pro”, If necessary, enter passkey 0000/accept connection.

STEP 3 Once successfully paired, you will hear “your headset is connected”. If you want to pair another or new phone, you can also go into pairing mode by pressing and holding the “ MFB” button for 5 seconds until the LED blinks alternately blue and red.

Connect with mobile phone

Reconnect Bluetooth

Whenever you turn Audition Pro on again it will automatically reconnect to your phone. Otherwise, please press MFB button once to reconnect them.

2.2 Connect with NFC enabled mobile phone

STEP 1 Make sure NFC function is turned on from your phone settings and the screen is active and unlocked.

STEP 2 Hold the NFC mobile phone against the NFC zone of the headset (the NFC logo) until your mobile phone plays an indicate note. (Some phones will vibrate and some will have a beep sound.)

STEP 3 Then your phone will get a reception request if you would like to pair with the headphones.

STEP 4 Tap “Yes”, then your mobile phone will connect with your Audition Pro.

STEP 5 Tap it again to disconnect.

Connect with NFC

NOTE: Since the NFC antenna is located in different locations for different phones, it is helpful to know the location for fast pairing. For details on NFC, see your phone’s user manual. NFC pairing is active pairing, the headset can be activated both in power on and power off modes.

2.3 Connect with two mobile phones simultaneously

STEP 1 Connect headphones with the first phone as above. Then Turn off the headphones.

STEP 2 Connect headphones with the second phone as above.

STEP 3 Tap and select “Avantree Audition Pro” on the first phone to connect it.

STEP 4 Now the headset has connected with the two phones simultaneously.

NOTE: Audition Pro only has one audio channel, if you want to play music from another Bluetooth device, please pause current device’s music first.

Connect with two mobile phones

2.4 Connect with PC/Laptop

STEP 1 Turn your Audition Pro off (press and hold the MFB for 2 seconds).

STEP 2 Press and hold the MFB for about 5s until LED indicator flashes blue and red alternately.

STEP 3 Activate Bluetooth on your PC/Laptop and select “Avantree Audition Pro”.

Connect with PC

NOTE: Make sure the PC/notebook is Bluetooth-enabled and supports the A2DP profile, otherwise you may need a separate Bluetooth dongle that supports this feature. On Playback devices, Please set “Avantree Audition Pro Hands- Free” as a Default Communications Devices, and “Avantree Audition Pro Stereo” as Default Device, or the sound will come from the laptop instead of the headphones. For additional details on how to set up with a PC/Laptop, please see support.avantree.com

2.5 Connect as wired headphones

When the device is not Bluetooth enabled, or if your Audition Pro battery is low (blinking red LED), you can use a 3.5mm audio cable to stream music. Connect the supplied 3.5mm audio cable between your device and the 3.5mm audio socket on your Audition Pro.

Connect as wired headphones

NOTE: The buttons and microphone on your Audition Pro will not work when connected as wired headphones.

3. How to use

Button	Function	Operation
Power on	Press and hold MFB for 1 second
Power off	Press and hold MFB for 2 seconds
Answer a call	Press MFB once
End a call	Press MFB once
Reject a call	Press and hold MFB for 1 second
Redial last number	Double click MFB
Play music	Press MFB once
Pause music	Press MFB once
“V+” and “V-”	Voice Dial / Command (Phone feature)	Short press “V+” and “V-”
“V+” and “V-”	Bass boost	Press and hold “V+” and “V-” together for 3 seconds
and “V+”	Voice prompts ON	Press MFB and “V+” together once
and “V-”	Voice prompts OFF	Press MFB and “V-” together once
V+	Volume up	Press “V+” once
V-	Volume down	Press “V-” once
V+	Next track	Press and hold “V+”
V-	Previous track	Press and hold “V-”

Note: To switch between Bass on and Bass off mode, you can press and hold the V+ and V- for about 3 seconds provided that you are in the process of listening to the music. You will hear voice prompts “Bass on” or “Bass off”.

4. How to turn off “ Voice Prompts” of Audition Pro?

Please short press MFB & V- together provided that the headphones are connected to your phone or other devices. If you want to turn on the “voice prompts” again, please short press MFB & V+ together.

5. How to restore Audition Pro to Default Settings?

You may need to reset your Audition Pro if it’s not working as expected.Under standby mode, press and hold “V+” and MFB button for 5 seconds until the indicator flashes blue and red together very quickly about 2 times and then the headset will turn off automatically. Now your Audition Pro has been restored to its default settings. After powered on again, it will enter pairing mode directly.

Working mode	Headphones LED indicator
SBC codec	LED flashes BLUE once every 7 seconds
AAC codec	LED flashes BLUE twice quickly every 7 seconds
aptX codec	LED flashes WHITE once every 7 seconds
aptX Low Latency codec	LED flashes WHITE twice every 7 seconds

Note: aptX Low Latency is supported when the headphones are paired with a transmitter that also supports aptX Low Latency. This can be verified by the LED indications.

7. How to charge?

When the LED blinks red, you should recharge your headphones. Remove the Micro USB port protector and charge the headphones via the supplied Micro USB cable. It normally takes about 3 hours to fully charge the battery. The LED will stay red when charging and will turn off when charging is complete.

How to charge

Charging requirement: You can plug our supplied Micro USB cable to your own USB chargers (wall charger/travel charger/car charger, etc) with 5V/500mA- 2A or to a PC/Mac USB port. It is OK to use most mobile phone chargers on the market.

8. Product specifications

Bluetooth version: 4.1
Supported profiles: HFP (Headset), HFP (Hands-Free), A2DP, AVRCP
Supported audio codecs: SBC, AAC, aptX, aptX Low Latency
Operational range: Class 2, 10 meters (33 feet)
Driver Diameter: 40mm
Impedence:32 ohm
Frequency Response: 20Hz-20KHz
Battery: rechargeable lithium battery
Battery life: up to 40 hrs
Standby time: up to 20 days
Headset weight: 190g (6.7 oz)
Headset size: 170mm (W) x180mm (H) X80mm (D)
Input 5.0V , 500mA-2A (By external power supply), or 3.7V , 550mAh (By Li-ion rechargeable battery)

Note: The talk and standby times may vary when used with different mobile phones or other compatible Bluetooth devices and are also dependant on different usage styles, settings and operating environment.

Avantree Low Latency Wireless Headphones Audition Pro User Manual – Download [optimized]
Avantree Low Latency Wireless Headphones Audition Pro User Manual – Download