LAMAX Electronics T10 4K GPS User Manual
- June 7, 2024
- LAMAX
Table of Contents
- PACKAGE CONTENTS
- CAMERA INTRODUCTION / CONTROLS
- SETTING UP FOR THE FIRST TIME
- PLACEMENT ON THE WINDSCREEN
- SETTINGS MENU
- SPEED CAMERA ALERT
- WIFI APPLICATION
- INSTALLING THE REAR CAMERA (OPTIONAL)
- UPDATING FIRMWARE
- CONNECT WITH US
- PARAMETERS
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
T10
PACKAGE CONTENTS
- LAMAX T10 dashcam
- Magnetic 3M mount with GPS
- Cigarette lighter adapter with extra USB port
- MicroSD card reader for transferring files to PC
- 3M cable clips (3x) + cable tool
- Replacement 3M adhesive pad for mount
- User manual
CAMERA INTRODUCTION / CONTROLS
- Micro USB port for power supply
- POWER / OK button
- Camera power LED (lit blue = camera on)
- Speaker
- AV port to connect rear camera (optional)
- Microphone
- Memory card slot
- RESET button
- Recording LED (flashing blue =recording, lit red = not recording)
- DOWN button
- MENU button
- UP button
AT ALL TIMES
POWER / OK button
|
Hold
|
Camera On/Off
---|---|---
MENU button
|
Press
|
Open menu
MENU button
|
Hold
|
Switch between video / photo / gallery mode
UP button
|
Hold
|
Turn WiFi On/Off
RESET
|
Press with paperclip
|
Restart camera
VIDEO MODE
|
|
POWER / OK button
|
Press
|
Start/Stop recording
MENU button
|
Press
|
Protect recording from being overwritten
UP button
|
Press
|
Toggle between front/rear camera display
Hold
|
WiFi On/Off
DOWN button
|
Press
|
Mute/Unmute audio recording
Hold
|
Parking mode On/Off
PHOTO MODE
|
|
POWER / OK button
|
Press
|
Shutter
UP button
|
Hold
|
Zoom in
DOWN button
|
Hold
|
Zoom out
GALLERY MODE
|
|
POWER / OK button
|
Press
|
Start/Pause playback
UP button
|
Press
|
Browse files Change playback speed
DOWN button
|
Press
|
Browse files Change playback speed
MENU
|
|
POWER / OK button
|
Press
|
Confirm
MENU button
|
Press
|
Switch between menu mode/camera menu Close menu
UP button
|
Press
|
Navigate the menu
DOWN button
|
Press
|
Navigate the menu
SETTING UP FOR THE FIRST TIME
-
Insert the microSD card into the camera as shown (card pins towards the display).
› Use SD cards from reputable manufacturers of Class U3 and higher with a capacity of up to 128 GB.
› Remove the card only when the camera is off.
› The first time you use the card, format it directly in the camera and repeat the formatting at least once a month to ensure proper camera operation. -
Plug the adapter into the cigarette lighter and with a USB cable, connect it to the camera mount.
› The camera is designed for use only when connected to a power supply. -
The dashcam turns on automatically and starts recording.
› For some vehicles, it is necessary to start the ignition first.
PLACEMENT ON THE WINDSCREEN
-
The ideal place to attach the dashcam is the space between the windscreen and the rearview mirror so that it does not obstruct the driver’s view.
-
Make sure the glass at the point of attachment is clean and dry.
› Ideal temperature for adhesion is 20°C – 40°C. -
Remove the film from the 3M adhesive pad on the camera mount.
-
Before attaching to the glass, adjust the camera whilst switched on to make sure it has a good view.
-
Press the 3M adhesive pad onto the glass and hold for a while.
SETTINGS MENU
VIDEO SETTINGS
Speed Camera Alert| Allows the reporting of stationary speed cameras from the
uploaded database.
---|---
Parking mode| If an impact is detected by the G-sensor, the camera
automatically turns on and starts recording. After 30 seconds the recording
will be saved, protected and the camera will turn off again. When parking mode
is activated, the display is turned off so as not to attract attention. The
sensitivity setting of the G-sensor is the same as when recording
conventionally. Use the parking mode function with the power supply
disconnected!
Audio recording| Allows you to mute or unmute the microphone when recording
video. This can be done quickly by pressing the DOWN button.
Loop length| Sets the length of each individual recording. The camera records
a 1-5 minute video in a loop. If the memory card becomes full, the dashcam
will start overwriting the oldest recordings. The individual videos follow
each other smoothly.
Resolution| Higher resolutions ensure better recording, but also larger file
sizes. Higher FPS ensures smoother video.
G-senzor| Thanks to the G-sensor, the camera can detect an impact, for example
in a traffic accident. As soon as the camera detects an impact, it immediately
protects the shot currently being recorded against being overwritten.
WDR| Thanks to the WDR function, the dashcam captures the image better in a
wide contrast ratio. This means the camera better handles situations where
parts of the image are more or less illuminated. A typical example may be the
contrast between light and shade or a road at night with the headlights of
oncoming cars.
Exposure| Adjusts the camera exposure to optimize video brightness.
Date Stamp| Sets whether to display date on the video.
GPS Stamp| Sets whether to display GPS coordinates on the video.
Speed Stamp| Sets whether to display speed on the video.
Speed Units| Sets the speed unit in the camera
GENERAL SETTINGS
WiFi| WiFi is used to connect the camera to the mobile application. In the
app, you can edit some of the settings of your dashcam, control front and rear
camera recording, and download videos to your smartphone.
---|---
Screensaver| Sets the screen to turn off automatically when you are not
operating the camera. The time intervals are 1–5 minutes, or the screensaver
can be switched off completely.
Auto Power Off| Allows you to set the dashcam to turn off automatically when
idle after 1, 3, or 5 minutes.
System Sounds| Allows you to switch ON or OFF the key sound and the welcome
tone.
Language| Sets the preferred language of the camera operating system.
Time / Date| Allows you to manually set the current date and time. The dashcam
synchronizes the time and date automatically as soon as the GPS module in the
camera holder is connected to the GPS signal.
Timezone| In this setting you can change the time zone.
Daylight Saving Time| When this function is turned on, the time automatically
adjusts when daylight savings time begins or ends.
Format SD-Card| This feature deletes all photos and videos on the camera.
Attention, this even includes protected files! We recommend formatting at
least once a month.
Default Settings| Allows you to reset the camera settings to factory settings.
FW Version| Learn about the currently installed firmware version.
PHOTO SETTINGS
| Resolution | Higher resolutions ensure better recording but larger file sizes. |
|---|---|
| Quality | Higher quality settings ensure better recording but larger file |
sizes.
Exposure| Adjusts the camera exposure to optimize photo brightness.
Date Stamp| Allows you to set the date to appear on the photo.
GALLERY OPTIONS
| Delete | Allows you to delete one or all unprotected recordings in the camera. |
|---|---|
| Protect | Allows you to lock (protect) or unlock entries. |
| Slide Show | Automatic viewing of files at a set interval. |
SPEED CAMERA ALERT
› GPS status is indicated by an icon in the lower-left corner of the camera
display.
› When the GPS is connected to the satellites, the icon turns green .
› The GPS module records speed, GPS coordinates and warns of fixed speed
cameras and red light cameras.
› The database contains more than 40,000 fixed-speed cameras throughout
Europe.
ICON DESCRIPTION
- Speed camera
- Average speed camera
- Red light camera
- Red-light speed camera
AUDIBLE NOTIFICATIONS
› Approaching speed camera – beep
› At the speed camera/beginning of average speed measurement – ascending tone
› End of average speed measurement – descending tone
WIFI APPLICATION
- Scan the QR code or use the link: https://www.lamax.electronics.com/t10/app
- Install the application on your smartphone or tablet.
- Turn on WiFi in the camera settings menu – the display will show the network name (SSID) and WiFi password (PWA2).
- On your phone or tablet, connect to the WiFi network with the name of the camera, enter the password (the factory default is
- 12345678), start the application, and connect to the camera.
APP CONTROLS
- Memory card status
- Battery status
- Audio recording on / off
- Take photo
- Recording time
- Live video preview
- Recording on / off
- VIDEO mode
- PHOTO mode
- Files in camera
- Enter camera settings
- Resolution settings + remaining time until SD card is full
INSTALLING THE REAR CAMERA (OPTIONAL)
- The ideal location for the rear camera is the upper center part of the rear window.
- Make sure that the glass is clean and dry at the attachment point.
- Remove the film from 3M adhesive pad on the camera holder.
- Before attaching it to the glass, point the camera to capture best view.
- Press the 3M adhesive pad onto the glass and hold it for a while.
- Connect the rear camera to the switched-off front camera with the
connecting cable.
The cable can be easily hidden in the interior under the roof upholstery. Guide it sideways to the passenger side and gradually push the cable under the upholstery using the tool.
UPDATING FIRMWARE
The latest camera firmware can be found in the „Downloads“ section of the
product website: https://www.lamax-electronics.com/t10
UPDATE PROCEDURE
- Prepare a microSD by formatting it on a PC / Mac.
- Download and open the .zip file containing the “.bin” files. Do not change the files’ names.
- Copy the “.bin” files to the formatted microSD card.
- Insert the microSD card into the switched-off camera. Plug the dashcam into the power supply and making sure the dashcam is powered throughout the update process. The update should begin automatically on start-up.
- Wait for the update to complete. Then format the memory card in the camera itself.
CONNECT WITH US
Find complete instructions and current firmware and speed camera databases at: https://www.lamax-electronics.com/t10
Do not forget to register your product on our website: https://www.lamax- electronics.com/productupdate
We will let you know as soon as we update the firmware or speed camera database! By registering, you also get access to the latest news and discount promotions!
PARAMETERS
Front camera video resolution:| 4K (3840×2160) @ 30FPS (interpolated)
2.5K (2560×1440) @ 30FPS (max. resolution when rear camera is connected)
FullHD (1920×1080) @ 60FPS
FullHD (1920×1080) @ 30FPS
---|---
Field of view:| 170°
Screen size:| 2,45“ IPS
Memory:| MicroSDHC/SDXC up to 128 GB
Video format:| MOV, H.265/H.264 compression
Photo format:| JPG
Photo resolution:| Up to 16 Mpx
Connectivity:| WiFi, MicroUSB
Power supply:| Built-in battery
Holder:| Magnetic 3M adhesive pad
Menu languages:| English, German, Czech, Slovak, Polish, Hungarian
Dimensions:| 47×74×39 mm
Features:| GPS with the speed camera alerts (can be switched off), Wi-Fi with
app, parking mode, WDR, turn video watermarks on/off (time and date, speed
and coordinates), file protection (on impact/button), auto start recording,
G-sensor with sensitivity adjustment, loop recording, exposure settings,
screensaver, key sounds that can be switched off, photo mode
REAR CAMERA SPECIFICATIONS (OPTIONAL)
Rear camera resolution:
|
FullHD (1920×1080) @ 30FPS
---|---
Connecting cable length:
|
6 meters
Note, when the rear camera is connected, the maximum resolution of the front
camera is 2.5K (2560×1440) @ 30FPS.
Specifications may change due to the replacement of any part of the device or
software updates.
MANUFACTURER:
elem6 s.r.o., Braškovská 308/158, 161 00 Prague 6
https://www.lamax-electronics.com
Subject to printing errors and changes to the manual.
