POWERVIDEO Wireless Water Leak Detector User Guide
- June 15, 2024
- POWERVIDEO
Table of Contents
Wireless Water Leak Detector
User Guide
Wireless Water Leak Detector
Checklist
Structure
| No. | Name |
|---|---|
| 1 | Indicator |
| 2 | Negative probe |
| 3 | Positive probe |
| 4 | Power button |
Installation
3.1 Opening the Back Cover
3.2 Adding the Water Leak Detector to the Hub
- Make sure that the version of the app is 1.99.300 or later, and the hub is V1,001.0000004.0 or later
- Make sure that you have added the hub to the DMSS or COS Delink Care.
3.3 installing the Water Leak Detector
a: All-in-one installation
b: Split mount with screw or adhesive tape
- install the water leak detector where the water is likely to leak
- When the water reaches the terminal of the probe, the indicator flashes green for 0.4 seconds
- You can adjust the height of the positive probe. Turn the positive prove clockwise, and the detection sensitivity of the probe will increase. Turn it anticlockwise to decrease the sensitivity
- Scan the OR code on the package to receive the user’s manual for more information on the device and its installation procedures.
Replacing the Batter
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>