KYUNGWOO Smart Key Fob User Manual
- October 27, 2023
- KYUNGWOO
Table of Contents
SMART KEY FOB
User’ Manual
2022.10.12
| Prepared | Reviewed | Approved |
|---|---|---|
| Park jeguk |
Revision History
| Rev. | Date | Revision | In Charge |
|---|---|---|---|
| 1.0 | 2018.12.26 | First Release | Bae wonsik |
| 2.0 | 2022.08.10 | Correct Frequency (433MHz -> 433.92MHz, 134KHz -> 133KHz) |
Park jeguk
| | |
1. Synopsis
This document is specifically-written manual for receiver and transmitter (SMART KEY FOB) of wireless communication, which is to confirm user identifications under engine-start limiting function in heavy equipments.
SMART KEY FOB is defined as following: it receives signals with RFID 133 KHz and wakes up. After then, it transmits password-secured information to SMART KEY CONTROLLER by using 433.92MHz wireless signals.
WARNING
Exchanging batteries in incorrect way, It may cause explosion
Discard used batteries according to manufacturer’s instructions
2. Product Image
-
External Appearance
-
Dimension
-
Certification LABEL location
-
Block Diagram
4. Specification
4.1. Operating Specification
-. Must wake up the remote control by providing electricity with RFID 133 KHz.
-. Must be operating with CR2032 battery.
-. Must be able to transfer password-secured signals.
-. Must be able to use Single channels band of 433.92MHz.
4.2. Power Specification
-. 3 V d.c. (CR 2032 Lithium Battery)
-. Notice : Inserting opposite polarity of battery may cause explosion or damage to product (Please match battery polarity with battery holder)
4.3. General Specification
-. Storage Temperature: -30°C ~ 80°C
-. Operating Temperature: -20°C ~ 60°C
-. Wireless Tested Temperature : -20°C ~ 60°C
-. Water-Proof Specification: IP54 (Living Water-Proof)
-. Material of Device : PC (Material: 1220r, Flame Class : V2, Manufacturer : Lotte Chemical)
PC&ABS (Substance : LUPOY GN-5001RF BLACK, Flame Class : V0, Manufacturer : LG
CHEMICAL)
TPE (Material: TC5MGA-S340)
ZNP (Material: Lesser Zinc Ingot DC2, Manufacturer :Young Poong Co., Ltd. )
-. PCB Material :
object/part No.| manufacturer/ trademark| Layer /Thickness| Flame Class|
Standard| mark(s) of conformity1)
---|---|---|---|---|---
SMK TAG B/D PCB| JM ELECTRONICS CO LTD| 2Layer /0.8T| V-0| UL 796|
4.4 RF Specification
| Item | Specification |
|---|---|
| Wireless Data Communication System | Frequency |
Channel)
RF Power| Under 1 mW
Modulation Method| GFSK
Tested Temperature| -20℃ ~ +60℃
Magnetic Induction System| Frequency| 133KHz (Single Channel)
RF Power| Receive Only
Modulation Method| ASK
4.5. Product label Explanation of graphic symbols used
| Symbol | Description |
|---|---|
| Korea Certification Marking | |
| Communaute Europeenne Marking | |
| Electrical waste and electronics equipment | |
| Direct current |
5. Postal address:
Kyungwoo Systech Inc. Office: +82-2-985-8085
401, Daeryung Post Tower 5, 68, Digital-ro 9, Geumcheon-gu, Seoul, South
Korea
E-mail: Webmaster@kyungwoo.com
This equipment is not suitable for use in locations where children are likely to be present.
FCC Compliance Statement
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
RED Compliance Statement
This product is CE marked according to the provision of the RED (2014/53/EU).
Hereby Kyungwoo Systech Inc. declares that this product is in compliance with
the essential requirements and other relevant provisions of Directive
2014/53/EU
www.kyungwoo.com Copyright © 2014 Kyungwoo Systech Inc.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>