Nedis Fully Wireless Earphones User Guide

: June 7, 2024
: nedis

Table of Contents

Fully Wireless Earphones
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Nedis Fully Wireless Earphones

Nedis Fully Wireless Earphones - Main

Nedis Fully Wireless Earphones - Full earphones demo

Fully Wireless Earphones

For more information see the extended manual online: ned.is/hpbt5056gy

Intended use

The Nedis HPBT5056GY is a pair of fully wireless earphones. The product can be paired with any Bluetooth-enabled audio/ video device.
The earphones can be charged up to 4 times in the fully charged case.
Any modification of the product may have consequences for safety, warranty, and proper functioning.

Specifications

Nedis Fully Wireless Earphones - Specifications

Main parts (image A)

Lid
USB-C port
Left earphone slot
Charging indicator LED
Status indicator LED
Left earphone touch control
USB-C cable
Right earphone slot
Right earphone touch control
3 pairs of ear tips (S/M/L)

Safety instructions

WARNING

To prevent possible hearing damage, do not listen to high volume levels for long periods.

Only use the product as described in this document.
Do not use the product if a part is damaged or defective. Replace a damaged or defective product immediately.
Do not expose the product to direct sunlight, naked flames, or heat.
Do not expose the product to water or moisture.
Do not drop the product and avoid bumping.
Do not open the product.
Keep the product out of reach from children.
This product is not a toy. Never allow children or pets to play with this product.
Using earphones with both ears covered while participating in traffic is discouraged and may be illegal in some areas.
Charge the battery for at least 2 hours when you use it for the first time.
Only use the provided USB charging cable.
Some wireless devices may interfere with implantable medical devices and other medical equipment, such as pacemakers, cochlear implants, and hearing aids. Consult the manufacturer of your medical equipment for more information.
Do not use the product at locations where the use of wireless devices is prohibited due to potential interference with other electronic devices, which may cause safety hazards.
Disconnect the product from the power source and other equipment if problems occur.
This product is equipped with a non-removable internal battery. Do not attempt to replace the battery yourself.
Do not short circuit.
Do not repair the product. If damaged, it must be properly disposed of.

Pairing the earphones to a Bluetooth audio source

1. Take the earphones out of the charging case. The earphones switch on automatically.
Tap and hold both earphone touch controls for 2 seconds to manually switch on the earphones.
2. blinks red and blue to indicate pairing mode is active.
3. Enable Bluetooth on the device you want to pair the earphones with.
4. Select “HPBT5056GY” from the list of available Bluetooth devices on your device.

Charging the product

1. Plug the USB-C cable into the USB-C port of the charging case.
2. Plug the other end of into a computer or power adapter.
3. Plug the power adapter into a power outlet.
The charging indicator LED indicates the charging progress of the battery.
4. Place the earphones into the respective slots and close the lid to charge the earphones.
The earphones and the charging case can charge simultaneously.
The status indicator LED on the earphones burns red to indicate the earphones are charging.

Making phone calls

With the earphones connected to a mobile phone via Bluetooth, phone calls will automatically be redirected to the earphones.

To answer an incoming call, tap or .
To reject an incoming call, tap and hold or for 2 seconds.
To end a call, tap or .

Controlling the music

Tap or to play or pause the music.
Double-tap to skip to the next track.
Double-tap to skip to the previous track.

Add Siri/Google Assistant function

Tap and hold or for 3 seconds to activate Siri/Google Assistant.

Declaration of Conformity

We, Nedis B.V. declare as a manufacturer that the product HPBT5056GY from our brand Nedis®, produced in China, has been tested according to all relevant CE standards and regulations and that all tests have been passed successfully. This includes, but is not limited to the RED 2014/53/EU regulation.

The complete Declaration of Conformity (and the safety datasheet if applicable) can be found and downloaded via: nedis.com/hpbt5056gy#support

For additional information regarding the compliance, contact the customer service:
Web: www.nedis.com
E-mail: service@nedis.com
Nedis B.V., de Tweeling 28
5215 MC ‘s-Hertogenbosch, the Netherlands