VF RWATCH3 V fitness Smart Fitness Watch Instruction Manual
- June 7, 2024
- v-fitness
Table of Contents
V-fitness Smart Watch
Fitness Activity Tracker
Operation Instructions
VF-RWATCH3
Thank you for choosing our product. Please read the instructions carefully before use.
How to Use
-
Turn On
Automatic turn-on after charging
Note: The Watch must be charged and activated before first use. Please only use the originally supplied power cable to charge the watch.
Turn on/off by pressing and holding the DOWN button. -
Download and Install VeryFitPro
http://www.youduoyun.net/qrcode.html
You can directly scan this QR code to download the VeryFitPro APP or search “VeryFitPro” in the APP store to download and install.
Note : Conditions required by hardware platform operating system is as below: -
Please connect to your mobile phone correctly.
-
Bind the Watch
Open the APP and tap the DEVICE tab at the bottom. Next, scroll down and select BIND. Now select the product model (VF-RWATCH3), and tap “Confirm Binding” to complete.
Operation Instructions
1.
Key Instructions
UP button | Press | In screen locked state: Unlock screen |
---|
Swiping interface: next menu.
Pop-up interface: confirm
During stopwatch/timer operation: pause/continue
During workout paused: continue workout
Press and hold| During workout: pause the workout
Other interfaces: quickly launch workout
DOWN button| Press| In screen locked state: Unlock screen
During workout paused: stop workout
Pop-up interface: cancel/close
During stopwatch: start the timer
During timer: stop timekeeping and quit
Other interfaces: return to the previous interface
Press and hold| Turn on/Turn off
2.
Screen Operation
Screen | Tap | Select a current item. |
---|---|---|
Tap and hold | Tap and hold in the main dial interface to change dial skin. | |
Slide left/right | Switches interface left and right. | |
Slide up/down | Switches interface up and down. |
3. Gesture Operation
Note: Gesture function can be turned ON/OFF through mobile APP under Device > Wrist Sense.
Introduction to Workout Functions
-
Activate Workout
Enter the Workout list interface, slide up or down to select an item, and tap the icon to start. -
Start Sports
When Workout is activated, the Watch will show a countdown. Workout starts after the countdown. -
Operation during Workout
-
Reminders during Workout
Heart rate reminder
During sports, the Watch will continuously detect the current heart rate. If the current heart rate exceeds the maximum heart rate, the Watch will remind you to reduce workout intensity or stop through vibration and interface alarm. Set your safe heart rate reminder through Device > More > Heart rate zones > Custom maximum heart rate in the mobile APP. -
Pause or Stop Workout
Pause Workout:
In the unlocked state, press and hold the UP button to pause the workout. Tap the PLAY icon to resume the workout. In the paused state, slide up to view current workout data.
Stop Workout
In the paused state, select STOP to stop the workout.
After a workout, the Watch will keep details of the workout.
You can view this in the Exercises record interface.
Instructions for Other Functions
-
Health Data
Enter Health Data interface to view the accumulated steps, calories, and distances when wearing the Watch for that day.
-
Notifications
Turn on a smart reminder
When it’s in use, you need to turn on “Smart Reminder” in the APP, select and turn on notification types to be reminded. This function requires keeping the connection between the Watch and the mobile phone.
View message
When receiving the message, the Watch will vibrate to remind.
If the message is not immediately viewed after being received, slide down to view the message.
Delete message
The Watch can save the most recent 12 notifications. Beyond this limit, the earliest notice will be automatically deleted once a new notice is received. When the notification content exceeds one screen, it will be displayed continuously on the second screen.
• On the message list interface, the slide left a single message box to show the Delete icon.
Tap the Delete icon to delete the message.
• Slide down to the top of the message list, and tap the Clear icon to clear all messages. -
Heart Rate
The Watch supports heart rate detection.
Slide to Heart Rate Detection interface, hold for two seconds, the Watch will automatically detect heart rate. Please stand still during the detection, so that the Watch can output more accurate heart rate data.
Note: To improve the accuracy of heart rate detection, please wear the Watch correctly and keep all parts clean. -
Weather
The weather function allows you to keep track of the weather in your city. Because weather data is obtained through mobile phone network, it is required to maintain the
the connection between the Watch and the phone to timely update weather data. -
More Functions
Stopwatch
Able to record multiple times.
Timer
Able to set count-down. The watch will send a reminder by vibrating after the count-down is over.
Alarm clock
Set alarm clock in mobile APP.
When the set time is reached, the Watch will remind through vibration. In case of no operation after 20s, the alarm clock will automatically stop. After 5 minutes, the alarm clock will remind again. Press UP/DOWN button to pause the alarm, and after 5 minutes the alarm clock will remind again.
Call reminder
Call Reminder can be set in mobile APP. When it’s in use, turn on Call Reminder function in the mobile APP, and keep the connection between the Watch and the phone. When there is an incoming call, the Watch will send a reminder by vibrating. Close the call pop-up by pressing UP/DOWN button. -
Control Center
DND mode (Do Not Disturb)
Slide up once on dial interface, and enter control center interface. Tap the DND icon to lighten the icon . DND mode is on. Tap the DND icon again to dim the icon. DND mode is off.
Brightness adjustment
Slide up once on dial interface, and enter control center interface. The brightness level defaults as Level 2 . Tap the brightness icon to switch it to Level 3 . Tap the icon again to switch it to Level 1 . Tap the icon again to switch it to Level 2 .
System settings
Slide up once on dial interface, and enter the control center interface, and tap the System Setting icon to enter system settings.
In system settings:
• Home page setting: Tap text to enter this function and switch dial skins.
• Press and hold the upper button settings: Tap text to enter this function and set sports style entered when pressing and holding the UP button.
• Restore factory settings: Tap text to enter the factory reset procedure.
• Firmware information: Tap text to view firmware information and Bluetooth address.
Product Specifications
Product model | VF-RWATCH3 | Screen model | 1.3″TFT-LCD (round) |
---|---|---|---|
Battery capacity | 260mAh | Working voltage | 3.8V |
Charging time | Approx | ||
2- 4 hours | Battery duration | Approx 7 days. |
Battery life may
vary with usage.
Waterproofing
grade| SATM| Bluetooth version| BLE4.2
Working
temperature| -10 C -45 c| Product weight| 56.1g
Product
frequency| 2402-2480MHz| Max. transmission power consumption| 0 dBm
Waterproofing: Use of the Watchltring hand washing, raining and It swimming in shallow water is supported, but use under hot shower, diving, underwater diving, surfing, etc. is not supported.
Care Instructions
- Please stop using the Watch and disconnect all connections with other equipment before cleaning and maintenance.
- Please keep the Watch and its accessories dry. Do not dry with external heating equipment such as a microwave oven or hairdryer.
- Do not place the Watch and its accessories in an area where the temperature is too high or low, which may cause malfunction, fire, or explosion.
- Avoid strong shock or vibration to prevent damage or failure to the Watch and its accessories.
- Please do not disassemble or modify the Watch and its accessories. In case of failure, please contact after-sales service.
FAQ
The mobile phone cannot connect to the Watch.
- Try updating the VeryFitPro APP to the latest version.
- It is recommended to quit all APPs, reactivate the phone’s Bluetooth, and re-connect using the APP only.
- Confirm the operating system of the phone is Android 4.4 or iOS 9.0 and above.
The Watch has no message or calls reminders.
- It is required to turn on the smart reminder function and call reminder function in the APP and synchronize to the Watch.
- Check your phone has allowed all permissions to the VeryFitPro APP.
Bluetooth disconnects frequently.
- Keep the phone and watch within 7 meters of each other. Any type of shielding between the Watch and the phone will affect the connection. Other devices and metal jewelry may also interfere with the Bluetooth connection signal.
- Test the Bluetooth function of the phone is operating normally with other devices.
Safety and Product Information
Warning
Battery warning
Do not disassemble, bore or damage the battery.
Do not use sharp objects to remove the battery.
Health Warning
If you are wearing a pacemaker or other implanted electronic device, please
consult your doctor before using the heart rate monitoring function.
The watch’s optical heart rate sensor glows green and flashes. If you suffer
from epilepsy or are sensitive to blinking light sources, please consult your
physician if you can wear
this product.
The device tracks your daily activities through sensors.
This data is intended to tell you about your daily activities, such as steps,
sleep, distance, heart rate, and calories, but may not be completely accurate.
The device, accessories, heart rate sensors and other relevant data are
designed for entertainment and fitness, and not for medical purposes. They are
not applicable to the diagnosis, monitoring, treatment or prevention of any
diseases or symptoms. The heart rate data is for reference only. We are not
responsible for any consequences caused
by any data deviation.
Cycling Warning
If you are wearing a pacemaker or other implanted electronic devices, please
consult your doctor before using the heart rate monitoring function.
Notes:
Device data should be synchronized once every seven days to avoid data loss.
The device has no waterproof effect on seawater, acidic and alkaline solution,
chemical reagent and other corrosive liquids. The damage or defect caused by
misuse or improper use is beyond the warranty scope.
The device supports the use under cold shower or swimming excluding diving.
- In daily use, the device should be avoided from wearing too tight. Please keep the parts where the device touches the skin dry.
- During heart rate detection, please keep your arm still.
For more helpful guides visit us at
Warranty
Our goods come with guarantees that cannot be excluded under the Australian
Consumer Law. You are entitled to a replacement or refund for a major failure
and compensation for any other reasonably foreseeable loss or damage. You are
also entitled to have the goods repaired or replaced if the goods fail to be
of acceptable quality and the failure does not amount to a major failure.
www.laserco.com.au
Scan here to download VeryFitPro
http://www.youduoyun.net/qrcode.html